SEW-Eurodrive MOVIPRO Istruzioni operative

Drive Technology \ Drive Automation \ System Integration \ Services

Addendum to the

Operating Instructions

MOVIPRO

Accessories

Edition 08/2011 19300026 / EN

SEW-EURODRIVE—Driving the world

Addendum to the Operating Instructions – MOVIPRO® 3

Contents

1 General Information ............................................................................................ 4

1.1 Use of this documentation .......................................................................... 4

1.2 Structure of the safety notes ....................................................................... 4

1.3 Rights to claim under limited warranty ........................................................ 5

1.4 Exclusion of liability..................................................................................... 5

1.5 Other applicable documentation ................................................................. 5

1.6 Copyright..................................................................................................... 5

2 PZM2xA-A...-...-00 Power Interface .................................................................... 6

2.1 Type designation......................................................................................... 6

2.2 Nameplate................................................................................................... 6

2.3 Power interface assignment ....................................................................... 7

2.4 Basic unit .................................................................................................... 7

2.5 Scope of functions ...................................................................................... 8

2.6 Maintenance switch .................................................................................... 8

2.7 Power interface – mechanical installation ................................................... 9

2.8 Power interface – electrical installation..................................................... 11

2.9 Power interfaces – technical data ............................................................. 16

3 Sensor/Actuator Box ........................................................................................ 18

3.1 Sensor/actuator box – electrical installation.............................................. 19

3.2 Technical data of the sensor/actuator box ................................................ 20

4 BW..-0..-0. External Braking Resistors............................................................ 23

4.1 Braking resistors – mechanical installation ............................................... 24

4.2 Technical data of the external braking resistors ....................................... 28

5 Jumper Plug ...................................................................................................... 33

6 Mounting Accessories...................................................................................... 34

6.1 Handles..................................................................................................... 34

6.2 Mounting brackets..................................................................................... 35

7 Fan Subassembly.............................................................................................. 38

7.1 Mechanische installation of fan subassembly........................................... 39

Index................................................................................................................... 40

4Addendum to the Operating Instructions – MOVIPRO®

1Use of this documentation

General Information

1 General Information

1.1 Use of this documentation

The documentation is an integral part of the product and contains important information

on operation and service. The documentation is written for all employees who assemble,

install, startup, and service this product.

The documentation must be accessible and legible. Make sure that persons responsible

for the system and its operation, as well as persons who work independently on the unit,

have read through the documentation carefully and understood it. If you are unclear

about any of the information in this documentation, or if you require further information,

contact SEW-EURODRIVE.

1.2 Structure of the safety notes

1.2.1 Meaning of the signal words

The following table shows the grading and meaning of the signal words for safety notes,

notes on potential risks of damage to property, and other notes.

1.2.2 Structure of the section-related safety notes

Section safety notes do not apply to a specific action, but to several actions pertaining

to one subject. The used symbols indicate either a general or a specific hazard.

This is the formal structure of a section safety note:

1.2.3 Structure of the embedded safety notes

Embedded safety notes are directly integrated in the instructions just before the descrip-

tion of the dangerous action.

This is the formal structure of an embedded safety note:

•SIGNAL WORD Nature and source of hazard.

Possible consequence(s) if disregarded.

– Measure(s) to prevent the danger.

Signal word Meaning Consequences if disregarded

DANGER Imminent danger Severe or fatal injuries

WARNING Possible dangerous situation Severe or fatal injuries

CAUTION Possible dangerous situation Minor injuries

NOTICE Possible damage to property Damage to the drive system or its envi-

ronment

INFORMATION Useful information or tip: Simpli-

fies the handling of the drive

system.

SIGNAL WORD

Type and source of danger.

Possible consequence(s) if disregarded.

• Measure(s) to prevent the danger.

Addendum to the Operating Instructions – MOVIPRO® 5

Rights to claim under limited warranty

General Information

1.3 Rights to claim under limited warranty

A requirement of fault-free operation and fulfillment of any rights to claim under limited

warranty is that you adhere to the information in the documentation. Read the documen-

tation before you start working with the unit!

1.4 Exclusion of liability

You must comply with the information contained in this documentation to ensure safe

operation and to achieve the specified product characteristics and performance

features. SEW-EURODRIVE assumes no liability for injury to persons or damage to

equipment or property resulting from non-observance of these operating instructions. In

such cases, any liability for defects is excluded.

1.5 Other applicable documentation

This document supplements the operating instructions and limits the application notes

according to the following information. Use this document only together with the operat-

ing instructions.

1.6 Copyright

Unauthorized duplication, modification, distribution or any other use of the whole or any

part of this documentation is strictly prohibited.

6Addendum to the Operating Instructions – MOVIPRO®

2Type designation

PZM2xA-A...-...-00 Power Interface

2 PZM2xA-A...-...-00 Power Interface

2.1 Type designation

The type designation of the MOVIPRO®PZM2xA-A...-...-00 power interface comprises

the following characteristic data:

2.2 Nameplate

Each unit has a nameplate that provides important information. The following figure

shows an example of a nameplate:

PZM2 xA-A ... - ... - 00

MOVIPRO®connection:

D02 = Disconnection switch up to 25 A

D03 = Disconnection switch up to 40 A

M13 = Line and unit protection up to 5 A

M14 = Line and unit protection up to 9 A

M16 = Line and unit protection up to 15 A

Maximum switching capacity:

022=2.2kW

040 = 4.0 kW

075 = 7.5 kW

150 = 15.0 kW

Housing height:

2 = 110 mm

Type:

ZM = Power interface accessories

Product range:

P = MOVIPRO®

2081785611

Type Type designation SO# Production number

I Max.current carrying capacity P Max. switching capacity

D-76646 Bruchsal

Made in Germany

MOVIPRO

Feldumrichter

Field-Inverter

Type:

SO#:

Eingang / Input

PZM2xA-A075-D02-00

Ausgang / Output

U =

I =

3 x 380...500 V ± 10%

T =

f =

16 A

50...60 Hz ± 5%

+5...+40 °C

IP 54

7.5 kW

P =

XX.XXXXXXXXXX.XXXX.XX

Addendum to the Operating Instructions – MOVIPRO® 7

Power interface assignment

PZM2xA-A...-...-00 Power Interface

2.3 Power interface assignment

The following overview illustrates the assignment of the individual power interfaces to

the respective MOVIPRO®units:

2.4 Basic unit

The following figure shows the power interface:

Power interface Part number MOVIPRO®

up to 2.2 kW up to 4.0 kW up to 7.5 kW up to 11.0 kW up to 15.0 kW

PZM2xA-A075-D02-00 1 825 014 9 •••

PZM2xA-A150-D03-00 1 825 015 7 •••••

PZM2xA-A022-M13-00 1 825 023 8 •

PZM2xA-A040-M14-00 1 825 016 5 •

PZM2xA-A075-M16-00 1 825 017 3 •

2048160523

[1] MOVIPRO®connection (Han®10 B, female) [5] Suspension device (for storing the power interface

during a MOVIPRO®unit replacement, for exam-

ple)

[2] Power input terminal strip X1

[3] Front panel connectors

[4] Maintenance switch

[2]

[3]

[1]

[5]

[4]

8Addendum to the Operating Instructions – MOVIPRO®

2Scope of functions

PZM2xA-A...-...-00 Power Interface

2.5 Scope of functions

The power interface allows for the following functions:

• Connection to the AC 400 V supply system

• Connection to the 24 V backup voltage

• DC 24 V output of the integrated power supply for the MOVIPRO®self-supply without

external DC 24 V cabling (jumper with DC 24 V backup voltage)

• Connected voltages are looped through

• Disconnection of the MOVIPRO®unit via the maintenance switch

2.6 Maintenance switch

The maintenance switch of the power interface is used to disrupt the AC 400 V power

supply in the power face. The maintenance switch can be secured with 3 locks.

If the maintenance switch is in position "0", the MOVIPRO®is disconnected from the

AC 400 V voltage supply.

Depending on the respective type, the power interfaces are equipped with different

maintenance switches:

• D.. disconnection switch

• M.. line and unit protection

10 minutes

WARNING

Electric shock due to dangerous voltages present in the power interface.

Severe or fatal injuries.

• Disconnect the power interface from the power supply before you perform any work

on the unit.

• Observe a minimum switch-off time of 10 minutes after disconnecting the power

supply.

INFORMATION

When there is a valid enable signal pending for the MOVIPRO®, the motor is supplied

with current as soon as the maintenance switch is set to 1.

NOTICE

Increased wear of the switch contacts.

Damage of the switch contacts.

• Do not operate the maintenance switch under load.

Addendum to the Operating Instructions – MOVIPRO® 9

Power interface – mechanical installation

PZM2xA-A...-...-00 Power Interface

2.6.1 D.. disconnection switch

The following disconnection switches are possible depending on the unit's power rating:

2.6.2 M.. line and unit protection

The following line and unit protection is possible depending on the power:

2.7 Power interface – mechanical installation

2.7.1 General information

Observe the following notes on mechanical installation:

• Observe the general safety notes.

• Strictly observe all instructions as to the technical data and the permissible condi-

tions regarding the place of installation.

• Do only use provided attachment options when mounting the unit.

2.7.2 Minimum clearance

Observe the required minimum clearance for:

• the connection of the cables and plug connectors

• the operation of the respective devices such as the maintenance switches.

For the dimensions of the required minimum clearances, refer to chapter "Technical

data (page 17)".

Power Short designation Description

up to 7.5 kW D02 Disconnection switch up to 25 A

up to 15.0 kW D03 Disconnection switch up to 40 A

Power Short designation Description

up to 2.2 kW M13 line and unit protection up to 5 A

up to 4.0 kW M14 line and unit protection up to 9 A

up to 7.5 kW M16 line and unit protection up to 15 A

10 Addendum to the Operating Instructions – MOVIPRO®

2Power interface – mechanical installation

PZM2xA-A...-...-00 Power Interface

2.7.3 Mounting the power interface

Use the following enclosed parts for assembly:

• 2 × M5 × 30 SW8 screws

Mount the power interface on the right side of the MOVIPRO®unit (as viewed onto the

unit front).

Proceed as follows to mount the unit:

1. Make the required connections at the connection panel of the power interface, e.g.

AC 400 V supply cable and DC 24 V backup voltage.

2. Connect the plug connector of the power interface to the plug connector of the

MOVIPRO®.

3. Attach the power interface to the MOVIPRO®by tightening the two M5 × 30 SW8

screws with 1.6 Nm – 1.8 Nm (14 in-lb – 16 in-lb).

2062166283

[1] MOVIPRO®[3] Power interface

[2] Power interface flange [4] M5 × 30 SW8 screws

[1]

[2]

[4]

[3]

Altri manuali per MOVIPRO

Indice

Altri manuali SEW-Eurodrive Unità di controllo

SEW-Eurodrive

SEW-Eurodrive MOVITRAC LT Series Manuale utente

SEW-Eurodrive

SEW-Eurodrive DRS11B Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVIAXIS MXR81 Series Manuale utente

SEW-Eurodrive

SEW-Eurodrive 18979297 Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVIFIT basic Manuale utente

SEW-Eurodrive

SEW-Eurodrive Didactics Manuale utente

SEW-Eurodrive

SEW-Eurodrive Movidrive MDX61B Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVISAFE UCS50B Manuale utente

SEW-Eurodrive

SEW-Eurodrive 18978894 Manuale utente

SEW-Eurodrive

SEW-Eurodrive BST Series Manuale utente

SEW-Eurodrive

SEW-Eurodrive BMV Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVISAFE DCS B Series Manuale utente

SEW-Eurodrive

SEW-Eurodrive Movitrac B MCB 5A3 Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVIAXIS MXR Manuale utente

SEW-Eurodrive

SEW-Eurodrive Movidrive MDX61B Manuale utente

SEW-Eurodrive

SEW-Eurodrive MAXOLUTION MAXO-MS Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVIDRIVE MDA Series Manuale utente

SEW-Eurodrive

SEW-Eurodrive MOVIAXIS MXR80 Series Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente