Sharp PN -HW861 Manuale utente
PN-HW861 Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN-HW861
701
PN-HW861 Dismantle Instruction
2
Table of contents
1. Scope.................................................................................................................. 3
2. Tools for dismantling............................................................................................... 3
3. Dismantle Procedure .............................................................................................. 3
4. Back covers .......................................................................................................... 4
5. Printed circuit boards ............................................................................................. 5
6. Battery................................................................................................................ 5
7. LCD Module .......................................................................................................... 6
8. Capacitors............................................................................................................ 7
9. Parts List ............................................................................................................. 7
PN-HW861 Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove Printed circuit boards (section 5)
3. Remove Battery (section 6)
4. Dismantle LCD (section 7)
5. Remove Electrolyte Capacitors (section 8)
PN-HW861 Dismantle Instruction
4
4. Back covers
Back cover can be removed by screw driver.
PN-HW861 Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main I/F PWB (1pcs) Power PWB A (1pcs) Power PWB B (1pcs)
LED driver PWB (1pcs) T-CON PWB (1pcs)
6. Battery
This model uses only AAA battery for remote control.
Battery can easily be removed.
PN-HW861 Dismantle Instruction
6
7. LCD Module
- LCD Dismantle procedure
1. Remove Rear cover
2. Remove PWBs and Tray
3. Remove the Cables
LCD
PN-HW861 Dismantle Instruction
7
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB A and B.
These capacitors can be removed by using nipper to cut the leads.
On Power PWB A On Power PWB B
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Parts
Note
LCD
86inch LCD module
Printed Circuit Boards
Main I/F PWB
Power PWB A
Power PWB B
LED driver PWB
T-CON PWB
Battery
AAA battery
Electrolyte capacitors
(height >25mm, diameter >25mm)
On Power PWB A
On Power PWB B
External electric cables
2 kinds of Power Cord
- for EU
- for UK
Indice
Altri manuali Sharp Monitor
Sharp
Sharp PN-V602 Manuale utente
Sharp
Sharp PN-V601 Manuale utente
Sharp
Sharp LL-M17W1 - WXGA LCD Computer Manuale utente
Sharp
Sharp TL-M5200 Manuale utente
Sharp
Sharp IV-08MP Manuale utente
Sharp
Sharp LL-T2010 Manuale utente
Sharp
Sharp PN-L751H Guida utente
Sharp
Sharp MZ-1D13 Manuale utente
Sharp
Sharp PN-655U Manuale utente
Sharp
Sharp LL-T15G1 Manuale utente
Sharp
Sharp MZ-1D05 Manuale utente
Sharp
Sharp PN-655E Manuale utente
Sharp
Sharp PN-V701 Guida utente
Sharp
Sharp PN-HM851 Guida rapida
Sharp
Sharp PN-465U Manuale utente
Sharp
Sharp LC-20VM2E Manuale utente
Sharp
Sharp PN-455RU Manuale utente
Sharp
Sharp PN-V600 Operation Manuale utente
Sharp
Sharp PN-K321H Guida utente
Sharp
Sharp LCD MONITOR Manuale utente
