Shure SM35 Manuale utente

Indice

Altri manuali Shure Microfono

Manuali Microfono popolari di altre marche

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuale utente

DAPAudio

DAPAudio RM-101 Manuale utente

AKG

AKG CHM 21 Manuale utente

Sennheiser

Sennheiser evolution wireless series EM 100 Manuale utente

Sony

Sony C-48 Manuale utente

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuale utente

auna PRO

auna PRO MIC-900 Manuale utente

AKG

AKG D 3800 Manuale utente

MAIIN SOUND

MAIIN SOUND IIN style Manuale utente

Earthworks

Earthworks TC25 Manuale utente

Sennheiser

Sennheiser evolution D1 Manuale utente

Alesis

Alesis MicLink Wireless Manuale utente

DSPPA

DSPPA D6234 Manuale utente

Monacor

Monacor IMG STAGELINE ECM-300B Manuale utente

Ansr Audio

Ansr Audio Scan16 Manuale utente

JLab

JLab GO TALK Manuale utente

Renkforce

Renkforce TY-109 Manuale utente

Trust

Trust 31008 Manuale utente

SM35Performance Headset Condenser Microphone

SM35 Headworn Microphone

The Shure SM35 is a headworn electret condenser microphone, intended for use with a

wireless bodypack transmitter in live stage performances.

Wearing the Microphone

1. Install the windscreen on the microphone boom.

2. Place the headband around the back of the head, with the boom on the left side.

3. Place the microphone at the corner of the mouth. To decrease pops and plosives, avoid

placing the microphone directly in front of the mouth

Note: Do not store the microphone in damp, enclosed spaces. Allow perspiration to dry

completely before storing.

Specifications

Type

Electret Condenser

Frequency Response

40 Hz to 20,000 Hz

Polar Pattern

Unidirectional (Cardioid)

Output Impedance

@ 1 kHz

2400 Ω

Audio Output Level

-59.0 dBV/Pa

Signal-To-Noise Ratio [1]

@ 1 kHz

55 dB

Maximum SPL [1]

1000 Ω load, 1 kHz@ 1%THD

153.0 dB

Dynamic Range [1]

@ 1 kHz, 1000 Ω load

114.0 dB

Equivalent Output Noise [1]

typical, A-Weighted

39 dB

Power Requirements

Connector Type

TA4F XLR connector

+5

V

DC (nominal), 10

V maximum (DC bias)

12 to 52

V

DC, phantom power

Polarity

Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1

Cable

1.1 m (45 in.)

Connector

TA4F or XLR

Net Weight

72 g (2.53 oz.)

[1] Measurements taken using RPM626 preamp

*All specifications measured with a 48 Vdc phantom power supply. The microphone

operates at lower voltages, but with slightly decreased headroom and sensitivity.

Certifications

Note: Testing is based on the use of supplied and recommended cable types. The use of

other than shielded (screened) cable types may degrade EMC performance.

The CE Declaration of Conformity can be obtained

from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: 49-7262-92 49 0

Fax: 49-7262-92 49 11 4

Email: [email protected]