Shure ULXD6 Manuale utente
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 1 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
ULXD6 ULXD8
Boundary and Gooseneck Base
Transmitters
IMPORTANT SAFETY
INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Allow
sufficient distances for adequate ventilation and
install in accordance with the manufacturer’s
instructions.
8. DO NOT install near any heat sources such as open
flames, radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not place any open flame sources on the product.
9. DO NOT defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wider blade or the third prong are
provided for your safety. If the provided plug does
Publications User Guides ULXD6-ULXD8 (English)
› ›
Download PDF
English
Table of Contents
IMPORTANT SAFETY
INSTRUCTIONS
Quick Start Instructions
General Description
Included Components
Optional Accessories
Transmitter Controls and
Connectors
Connecting Gooseneck
Microphone to ULXD8 Base
Boundary Microphone
Placement
Batteries
Changing Transmitter
Settings
Mute/Active Button
High-Pass Filter
Transmitter RF Power
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 2 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. UNPLUG this apparatus during lightning storms or
when unused for long periods of time.
14. REFER all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Locking Transmitter Controls
Setting Initial State From
Charger
Audio Signal Encryption
BN and GN OFFSET
Transmitter Reset
Frequency Range
Model Variations
Specifications
Certifications
Information to the user
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 3 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
15. DO NOT expose the apparatus to dripping and
splashing. DO NOT put objects filled with liquids,
such as vases, on the apparatus.
16. The MAINS plug or an appliance coupler shall remain
readily operable.
17. The airborne noise of the Apparatus does not exceed
70dB (A).
18. Apparatus with CLASS I construction shall be
connected to a MAINS socket outlet with a protective
earthing connection.
19. To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
20. Do not attempt to modify this product. Doing so
could result in personal injury and/or product failure.
21. Operate this product within its specified operating
temperature range.
WARNING: Voltages in this equipment are hazardous to
life. No user-serviceable parts inside. Refer all servicing to
qualified service personnel. The safety certifications do
not apply when the operating voltage is changed from
the factory setting.
This symbol indicates that dangerous
voltage constituting a risk of electric shock
is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 4 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Quick Start Instructions
General Description
ULX-D series boundary and gooseneck base transmitters
add new designs to Shure's breakthrough ULX-D wireless
line. Boundary and gooseneck base transmitters offer
cable-free flexibility for corporate conference rooms,
government facilities, educational institutions, A/V
conferencing, and live sound reinforcement. Use Shure
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 5 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Wireless Workbench® software and networked charging
stations to simplify transmitter configuration and monitor
charging status.
Both transmitters run on rechargeable or AA batteries and
can be monitored using external control systems, such as
AMX or Crestron. ULX-D systems also offer audio signal
encryption, high-density mode, and Dante™ digital
networking for multi-channel audio over Ethernet.
Included Components
AA Batteries
Optional Accessories
4-bay networked charger for gooseneck
and boundary microphones
SBC450
8-bay networked charger for gooseneck
and boundary microphones
SBC850
8-Bay Shure Battery Charger SBC800
6' USB-A cable with wall plug for
charging Wireless Transmitters
SBC-USB-A
Shure Lithium-Ion Rechargeable Battery SB900A
Transmitter Controls and
Connectors
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 6 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
ɠ Power
Button
Press to power on; press and hold to
power off.
ɡ
Mute/Active
Button
Four settings are available for the
mute/active button:
Toggle: Press to switch between
active and mute states
Push-to-Mute: Hold button to mute
microphone
Push-to-Talk: Hold button to
activate microphone
Disabled: Button functionality off
ɢ Mute LED Indicates whether microphone is active
or muted. The following settings are
available:
Active Muted
Green* Red*
Red Off
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 7 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Red Flashing
red
*MX400R series gooseneck
microphones (red LED) do not offer this
setting.
ɣ Low-
Battery LED
Off = More than 30 minutes of
battery life remain
On (red) = Less than 30 minutes of
battery life remain
On (green) = Microphone docked
on charging station
On (amber) = Battery is missing or
is not inserted correctly
ɤ Infrared
(IR) Port
Align with receiver IR port to send
settings to transmitter.
ɥ Charge
Connector
Connects to networked chargers and
USB power supply.
ɦ
Gooseneck
Microphone
ULXD8 base fits 5", 10", and 15"
Microflex series microphones, available
in single or dualflex and with bi-color or
red-only LEDs. See Model Variations for
full list of gooseneck options.
Connecting Gooseneck
Microphone to ULXD8 Base
ULXD8 base transmitters fit 5", 10", and 15" Microflex
series gooseneck microphones, available in single and
dualflex models.
Connect microphone to base as shown.
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 8 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Boundary Microphone
Placement
The boundary transmitter sits on a table or desk to
transmit speech while discreetly blending into any
conference environment. Cardioid and omnidirectional
versions are available.
For best low-frequency response and rejection of
background noise, place the microphone on a large, flat
surface, such as a floor, table, or lectern.
To reduce reverberance, avoid reflective surfaces above or
to the side of the microphone, such as beveled sides of
pulpits or overhanging shelves.
Batteries
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 9 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
Boundary and gooseneck base transmitters can be
powered by Shure SB900A batteries or two AA batteries
(included).
The receiver front panel displays battery charge level in
hours/minutes for Shure batteries and in bars for AA
batteries. For accurate monitoring, set battery type in the
IR Presets menu using the receiver front panel or Wireless
Workbench and perform an IR sync.
Menu path: IR PRESETS > GOOSENECK / BOUNDARY >
BATTERY
Installation
1. Open the battery door.
2. Insert one Shure battery or two AA batteries. Align
+/- terminals on batteries as shown. For AA batteries,
rotate the rubber piece to hold batteries in place.
3. Close the battery door until it latches.
Use the small screw to the right of the batteries to secure
the battery door against tampering, if necessary.
1. Open the battery door.
2. Use a screwdriver to remove the screw to the right of
9/20/17, 11)49 AMShure Publications | User Guides | ULXD6 ULXD8
Page 10 of 31http://pubs.shure.com/guide/ULXD6-ULXD8/en-US
the battery.
3. Close the battery door.
4. Insert and tighten the screw using a screwdriver.
Altri manuali per ULXD6
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Shure Trasmettitore
Shure
Shure Axient Manuale utente
Shure
Shure P4T Manuale utente
Shure
Shure AD2 Manuale utente
Shure
Shure Axient Digital ADX1 Manuale utente
Shure
Shure P4T Manuale utente
Shure
Shure UC1L Manuale utente
Shure
Shure UC2 Manuale utente
Shure
Shure ADX Series Manuale utente
Shure
Shure AXIENT AXT100 Manuale utente
Shure
Shure ULXD6 Manuale utente
Shure
Shure AXIENT AXT100 Manuale utente
Shure
Shure UR1M Manuale utente
Shure
Shure P4T Manuale utente
Shure
Shure ULX-D Series Manuale utente
Shure
Shure W10BT Manuale utente
Shure
Shure U1 Manuale utente
Shure
Shure AXIENT AXT100 Manuale utente
Shure
Shure ADX2FD/K8 Manuale utente
Shure
Shure AD3 Manuale utente
Shure
Shure ULXD6 Manuale utente
