Siemens MOD-16 Manuale utente

P/N 315-090830-8

Installation Instructions

Model MOD-16

Output Driver

INTRODUCTION

The Model MOD-16 MXL Output Driver from

Siemens Industry, Inc. is an annunciator driver

that activates up to 16 outputs.

The Model MOD-16 is controlled by the MOI-7

module (See P/N 315-092799). Up to eight

MOD-16s can be used with an MOI-7.

OPERATION

Each MOD-16 activates any of its 16 program-

mable outputs for LEDs or for 24V lamps. The

selection of either the desired LEDs or the 24V

lamps is made at 16 positions on dipswitches S1

and S2 (See Figure 1).

If LEDs are used, open all dipswitches in S1

and S2 to provide for current limiting. Opening

a dipswitch (OFF position) inserts a 2.7K ohm

resistor in series with the output.

If 24V lamps or the SR-35 are used, close all the

dipswitches. Closing a dipswitch (ON position)

eliminates the 2.7K ohm limiting resistor.

CAUTION: PROPER SETTING OF THE DIP-

SWITCH IS NECESSARY TO

PREVENT CIRCUIT DAMAGE.

For additional information on the MXL/MXLV

System, refer to the MXL/MXLV Manual,

P/N 315-092036.

INSTALLATION

Remove all system power before installation,

first battery and then AC. (To power up, first

connect the AC and then the battery.)

1. Mount the MOD-16 in one module space on a

System 3 type rail using the four screws

provided.

2. Connect the MOD-16 to the MOI-7 with the

10-position ribbon cable P/N 555-190940

provided with the MOI-7.

3. If a connection to a MOD-16 module on

another rail is required, use the optional

cable P/N 555-190941.

ELECTRICAL RATINGS

Terminal voltage: 40V peak maximum

Maximum current for each output: 50mA

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

tnerruCeludoMCDV5evitcAAm2

tnerruCeludoMCDV42evitcA Am05+Am0 detcennocrep tuptuo

tnerruCeludoMCDV42ybdnatSAm

NOTES:

1. 18 AWG minimum for LED and 24V

lamp connections.

2. 14 AWG minimum for supply connec-

tions (TB1-9 and 10, TB2-9 and 10).

3. All wiring must be in accordance with

NEC 760.

4. All wiring must conform to local codes

and to the authority having jurisdiction

over the installation.

5. All wiring to MOD-16 is unsupervised

and must not leave enclosure.

6. For additional information see MOI-7

Module instructions, P/N 315-092799.

7. A maximum of 8 MOD-16s can be

used with the MOI-7.

8. When using SR-35, refer to Table 1.

9. Both TB1-9 (or 10) and TB2-9 (or 10)

must be connected to the common of

the power supply.

P/N 315-090830-8

Figure 1

Wiring Connection

TABLE 1

Connection to SR-35 Module*

Note: When using SR-35 with MOD-16, jumpers

P1-P8 on SR-35 must be in position B.

MOD-16 SR-35 Screw Termina

TB1-1 4

TB1-2 8

TB1-8 32

To PSR-1, TB3-1, or to

PS-35, TB1-5 33

To PSR-1, TB3-2, or to

PS-35, TB1-6 35

*For additional information see:

SR-35 Instructions (P/N 315-087691)

PS-35 Instructions (P/N 315-085062)

PSR-1 Instructions (P/N 315-090911)

Altri manuali Siemens Unità di controllo

Siemens

Siemens SINAMIC G130 Manuale utente

Siemens

Siemens SINUMERIK 840Di sl Manuale elenco delle parti

Siemens

Siemens SIMATIC ET 200S Manuale utente

Siemens

Siemens Modem Block Manuale utente

Siemens

Siemens RMB795 Manuale utente

Siemens

Siemens MKB-5 Manuale utente

Siemens

Siemens LFE1 Series Manuale utente

Siemens

Siemens SINAMICS G120 Manuale utente

Siemens

Siemens RC-30U Manuale utente

Siemens

Siemens FM 458-1 DP Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMOTION D4x5-2 Manuale utente

Siemens

Siemens FDK:521H1134 Manuale utente

Siemens

Siemens QAW850 Manuale utente

Siemens

Siemens SINAMICS S120 Manuale utente

Siemens

Siemens FDCI223 Manuale utente

Siemens

Siemens SIMATIC NET PG-5412 Manuale utente

Siemens

Siemens VAG60 Series Manuale utente

Siemens

Siemens ECOFAST 3RK1911-4AB Series Manuale utente

Siemens

Siemens SINUMERIK 840D sl Foglio di istruzioni

Siemens

Siemens XDACT-ASSY Manuale utente

Siemens

Siemens FDCIO223 Manuale utente

Siemens

Siemens SIMATIC EP200SP Manuale utente

Siemens

Siemens SIWAREX JB Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente