Siemens Simatic S7-1500/ET 200MP Documento tecnico

SIMATIC

S7-1500/ET 200MP

Digital input module

DI 64x24VDC SNK/SRC BA

(6ES7521-1BP00-0AA0)

Equipment Manual

07/2020

A5E48025116

-AA

Preface

S7-1500 / ET 200MP

Documentation Guide

Product overview

Wiring

Address space

Diagnostic alarms

Technical specifications

Dimensional drawing

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E48025116-AA

Ⓟ

07/2020 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

Equipment Manual, 07/2020, A5E48025116-AA 3

Preface

Purpose of the documentation

This manual supplements the S7-1500/ET 200MP

(https://support.industry.siemens.com/cs/ww/en/view/59191792) system manual.

Functions that relate in general to the systems are described in this system manual.

The information provided in this manual and in the system/function manuals supports you in

commissioning the systems.

Conventions

The term "CPU" is used in this manual both for the CPUs of the S7-1500 automation system

and for interface modules of the ET 200MP distributed I/O system.

Please also observe notes marked as follows:

Note

A note contains

important information on the product described in the documentation, on

the handling of the product or on the section of the documentation to which particular

attention should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Preface

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

4Equipment Manual, 07/2020, A5E48025116-AA

Open Source Software

Open-source software is used in the firmware of the I/O modules. Open Source Software is

provided free of charge. We are liable for the product described, including the open-source

software contained in it, pursuant to the conditions applicable to the product. Siemens

accepts no liability for the use of the open source software over and above the intended

program sequence, or for any faults caused by modifications to the software.

For legal reasons, we are obliged to publish the original text of the license conditions and

(https://support.industry.siemens.com/cs/ww/en/view/109757558).

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

Equipment Manual, 07/2020, A5E48025116-AA 5

Table of contents

Preface ................................................................................................................................................... 3

1 S7-1500 / ET 200MP Documentation Guide ........................................................................................... 6

2 Product overview................................................................................................................................... 8

2.1 Properties ............................................................................................................................ 8

3 Wiring .................................................................................................................................................. 10

3.1 Wiring and block diagrams................................................................................................. 10

3.2 Terminal assignment X10 and X11..................................................................................... 11

3.3 Connecting a module with a connection module ................................................................ 14

3.4 Wiring of the module ......................................................................................................... 16

3.5 Fuse .................................................................................................................................. 18

4 Address space ...................................................................................................................................... 20

5 Diagnostic alarms ................................................................................................................................ 26

5.1 Status and error displays .................................................................................................... 26

6 Technical specifications....................................................................................................................... 28

A Dimensional drawing........................................................................................................................... 32

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

6Equipment Manual, 07/2020, A5E48025116-AA

S7-1500 / ET 200MP Documentation Guide

The documentation for the SIMATIC S7-1500 automation system and the

SIMATIC ET 200MP distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

S7-1500 and ET 200MP systems, e.g. diagnostics, communication, motion control, Web

server, OPC UA.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/68052815).

S7-1500 / ET 200MP Documentation Guide

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

Equipment Manual, 07/2020, A5E48025116-AA 7

Manual Collection S7-1500/ET 200MP

The Manual Collection contains the complete documentation on the SIMATIC S7-1500

automation system and the ET 200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86140384).

SIMATIC S7-1500 comparison list for programming languages

The comparison list contains an overview of which instructions and functions you can use for

which controller families.

You can find the comparison list on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86630375).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

8Equipment Manual, 07/2020, A5E48025116-AA

Product overview

2.1 Properties

Article number

6ES7521-1BP00-0AA0

View of the module

Figure 2-1 View of the DI 64x24VDC SNK/SRC BA module

Properties

The module has the following technical properties:

•64 digital inputs; electrically isolated in 4 groups of 16

•Sourcing input or sinking input, depending on wiring

•Rated input voltage 24 V DC

•Suitable for switches and 2-/3-/4-wire proximity switches

Product overview

2.1 Properties

Digital input module DI 64x24VDC SNK/SRC BA (6ES7521-1BP00-0AA0)

Equipment Manual, 07/2020, A5E48025116-AA 9

The module supports the following functions:

Table 2- 1 Version dependencies of the module functions

Function

Firmware version

of the module

Configuration software

STEP 7

(TIA Portal)

as of V16 and HSP 0319

GSD file in STEP 7

(TIA Portal) V12 or higher,

or STEP 7

V5.5 SP3 or higher

Firmware update

V1.0.0 or higher

--- / X

Identification data I&M0 to I&M3

V1.0.0 or higher

Module-internal Shared Input (MSI)

V1.0.0 or higher

(PROFINET IO only)

Configurable submodules / submodules for

Shared Device

V1.0.0 or higher

(PROFINET IO only)

You can configure the module with STEP 7 (TIA Portal) and with a GSD file.

Accessories

The following accessories are supplied with the module and can be ordered as spare parts:

•U connector

•Universal front door with the article number: 6ES7 591-8AA00-0AA0

You can find additional information in the system manual S7-1500/ET 200MP

(http://support.automation.siemens.com/WW/view/en/59191792).

Other components

The following must be ordered separately:

•SIMATIC TOP connect connection module

•Pre-fabricated connecting cable with IDC connectors

For additional information, see section Connecting a module with a connection module

(Page 14)

Altri manuali per Simatic S7-1500/ET 200MP

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Siemens Unità di controllo

Siemens

Siemens 3TK2811 Manuale utente

Siemens

Siemens MJ-5 Manuale utente

Siemens

Siemens SIRIUS 3RW5 series Documento tecnico

Siemens

Siemens WF 705 Istruzioni per l'uso e l'installazione

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMOTION D410-2 Manuale utente

Siemens

Siemens SIRIUS 3RW5 series Documento tecnico

Siemens

Siemens SINAMICS G130 Manuale utente

Siemens

Siemens QAA73.210 Manuale utente

Siemens

Siemens SINUMERIK 840D sl Foglio di istruzioni

Siemens

Siemens LOGO! Series Manuale utente

Siemens

Siemens SIRIUS 3RA2130-4 A3 Series Manuale utente

Siemens

Siemens SINUMERIK 840D sl Foglio di istruzioni

Siemens

Siemens SIMATIC TI505 386/ATM Manuale utente

Siemens

Siemens SINAMICS G120 Scheda tecnica

Siemens

Siemens 8F-DI Ex NAMUR Manuale utente

Siemens

Siemens SINAMICS G130 TM150 Manuale utente

Siemens

Siemens RMH760B Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SITRANS LU SAM Manuale utente

Siemens

Siemens SINUMERIK 840D sl Manuale del proprietario

Siemens

Siemens SINAMICS S120 Documento tecnico

Siemens

Siemens LOGO! CIM Manuale utente

Siemens

Siemens SINUMERIK 805 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente