Siemens SIMATIC ET 200AL Documento tecnico

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

SIMATIC

ET 200AL

DI 8x24VDC 4xM12

(6ES7141

-5AF00-0BA0)

Equipment Manual

08/2021

A5E36680963

-AB

Preface

ET 200AL Documentation

Guide

Product overview

Wiring

Parameters/address space

Interrupts/diagnostic

alarms

Technical specifications

PROFIenergy

Dimension drawing

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E36680963-AB

Ⓟ

07/2021 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

Equipment Manual, 08/2021, A5E36680963-AB 3

Preface

Purpose of the documentation

This manual supplements the ET 200AL distributed I/O system

(https://support.industry.siemens.com/cs/us/en/view/89254965) system manual. Functions

that are generally applicable to the ET 200AL distributed I/O system are described there.

The information provided in the present manual, the system manual and the function

manuals enables you to commission the ET 200AL distributed I/O system.

Conventions

Please also observe notes marked as follows:

Note

Indicates important product information to which particular attention should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

4Equipment Manual, 08/2021, A5E36680963-AB

Table of contents

Preface................................................................................................................................................... 3

1 ET 200AL Documentation Guide............................................................................................................ 5

2 Product overview................................................................................................................................... 9

2.1 Properties............................................................................................................................ 9

2.2 Operator controls and display elements ............................................................................. 11

3 Wiring .................................................................................................................................................. 12

3.1 Terminal and block diagram............................................................................................... 12

3.2 Pin assignment .................................................................................................................. 13

4 Parameters/address space ................................................................................................................... 16

4.1 Parameters ........................................................................................................................ 16

4.2 Explanation of the parameters ........................................................................................... 16

4.3 Address space.................................................................................................................... 17

5 Interrupts/diagnostic alarms ............................................................................................................... 18

5.1 Status and error displays.................................................................................................... 18

5.2 Interrupts .......................................................................................................................... 20

5.3 Diagnostics alarms............................................................................................................. 20

6 Technical specifications....................................................................................................................... 21

6.1 Technical specifications ..................................................................................................... 21

7 PROFIenergy ........................................................................................................................................ 24

7.1 Pause function................................................................................................................... 24

7.2 Behavior of the digital input module .................................................................................. 25

A Dimension drawing ............................................................................................................................. 26

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

Equipment Manual, 08/2021, A5E36680963-AB 5

ET 200AL Documentation Guide

The documentation for the SIMATIC ET 200AL distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC ET 200AL distributed I/O system. The STEP 7 online

help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the

SIMATIC ET 200AL distributed I/O system, e.g. diagnostics, communication, Motion Control,

Web server.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742667).

Manual Collection ET 200AL

The Manual Collection contains the complete documentation on the SIMATIC ET 200AL

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.automation.siemens.com/WW/view/en/95242965).

ET 200AL Documentation Guide

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

6Equipment Manual, 08/2021, A5E36680963-AB

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet

(https://support.industry.siemens.com/My/ww/en/documentation).

"mySupport" - CAx data

In the CAx data area of "mySupport", you can access the latest product data for your CAx or

CAe system.

You configure your own download package with a few clicks.

In doing so you can select:

•Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

•Manuals, characteristics, operating manuals, certificates

•Product master data

You can find "mySupport" - CAx data on the Internet

(https://support.industry.siemens.com/my/ww/en/CAxOnline).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/cs/ww/en/ps/ae).

ET 200AL Documentation Guide

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

Equipment Manual, 08/2021, A5E36680963-AB 7

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated

Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109767888).

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of

TIA Portal.

The SIMATIC Automation Tool provides a multitude of functions:

•Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs

•Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a CPU

•Transfer of the date and the programming device/PC time converted to UTC time to the

module

•Program download to CPU

•RUN/STOP mode switchover

•CPU localization by means of LED flashing

•Reading out of CPU error information

•Reading of the CPU diagnostics buffer

•Reset to factory settings

•Firmware update of the CPU and connected modules

You can find the SIMATIC Automation Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/98161300).

PRONETA

SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network

during commissioning. PRONETA features two core functions:

•The topology overview automatically scans the PROFINET and all connected components.

•The IO check is a fast test of the wiring and the module configuration of a plant.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

ET 200AL Documentation Guide

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

8Equipment Manual, 08/2021, A5E36680963-AB

SINETPLAN

SINETPLAN, the Siemens Network Planner, supports you in planning automation systems and

networks based on PROFINET. The tool facilitates professional and predictive dimensioning of

your PROFINET installation as early as in the planning stage. In addition, SINETPLAN supports

you during network optimization and helps you to exploit network resources optimally and to

plan reserves. This helps to prevent problems in commissioning or failures during productive

operation even in advance of a planned operation. This increases the availability of the

production plant and helps improve operational safety.

The advantages at a glance

•Network optimization thanks to port-specific calculation of the network load

•Increased production availability thanks to online scan and verification of existing systems

•Transparency before commissioning through importing and simulation of existing STEP 7

projects

•Efficiency through securing existing investments in the long term and the optimal use of

resources

You can find SINETPLAN on the Internet (https://www.siemens.com/sinetplan).

DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)

Equipment Manual, 08/2021, A5E36680963-AB 9

Product overview

2.1 Properties

Article number

6ES7141-5AF00-0BA0

View of the module

Figure 2-1 View of the DI 8x24VDC 4xM12 digital input module

Altri manuali per SIMATIC ET 200AL

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Siemens Sistema I/O

Siemens

Siemens SIMATIC ET 200S Manuale utente

Siemens

Siemens Simatic 6DL2804-1 Series Istruzioni per il montaggio

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens ION PROFIBUS DP SPY T001 Manuale utente

Siemens

Siemens SIMATIC ET 200AL Guida utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens Simatic ET200pro Manuale utente

Siemens

Siemens 6DL2804 Series Istruzioni per il montaggio

Siemens

Siemens 262E01 Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMATIC ET 200iSP Manuale utente

Siemens

Siemens FDCIO222 Manuale utente

Siemens

Siemens Simatic S7-1500 Manuale utente

Siemens

Siemens DQ 16x24VDC/0.5A HF Manuale utente

Siemens

Siemens SIMATIC ET 200SP Manuale utente

Siemens

Siemens SIMATIC ET 200S Manuale utente

Siemens

Siemens SIMATIC ET 200eco PN Documento tecnico

Siemens

Siemens Simatic S7-1500 Manuale utente

Siemens

Siemens PPM-1U32.BPR Manuale utente

Siemens

Siemens FDCI222 Manuale utente

Siemens

Siemens SIMATIC ET 200eco PN Documento tecnico

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Advantech

Advantech PCM-27J3AU Manuale di installazione e funzionamento

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente