Siemens Simatic PC Panel PC 870 Documento tecnico

Preface; Table of Contents

Product Overview 1

Starting Up the Computing Unit 2

Connecting and Operating the

Computing Unit 3

Expanding and Servicing the

Computing Unit 4

Configuring the Computing Unit in

the BIOS Setup 5

Fault Diagnosis 66

Hardware Information 7

Remote mount form factor 8

Appendices A

Glossary, Index

Edition 12/01

This manual is part of the documentation

package with the order number:

6AV7691-0AB00-1AB0

Panel PC 870

Computing Unit

Equipment Manual

SIMATIC PC

Index-2 PanelPC 870 Computing Unit Equipment Manual

Edition 12/01

!Danger

indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

!Warning

indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

!Caution

used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Caution

used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may

result in property damage.

Notice

indicates a potential situation which, if not avoided, may result in an undesirable result or state.

Note

is an important piece of information about the product, the handling of the product or the respective part of

the documentation which should be noted in particular.

Qualified Personnel

Equipment may be commissioned and operated only by qualified personnel. Qualified personnel within

the meaning of the safety notices in this manual are persons who are authorized to commission, ground

and identify equipment, systems and circuits in accordance with safety engineering standards.

Correct Usage

Note the following:

!Warning

The equipment may be used only for the applications stipulated in the catalog and in the technical descrip-

tion and only in conjunction with other equipment and components recommended or approved by Sie-

mens.

Startup must not take place until it is established that the machine, which is to accommodate this compo-

nent, is in conformity with the guideline 98/37/EEC.

Faultless and safe operation of the product presupposes proper transportation, proper storage, erection

and installation as well as careful operation and maintenance.

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

Index-3

Panel PC 870 Computing Unit Equipment Manual

Edition 12/01

Trademarks You will find the registered trademarks of Siemens AG in the preface. Some of the other desig-

nations used in these documents are also registered trademarks; the owner’s rights may be violated if

they are used by third parties for their own purposes.

Impressum Editor: A&D PT1D1

Publisher: A&D SE ES4

We have checked the contents of this manual for agreement with the hard-

ware and software described. Since deviations cannot be precluded entirely,

we cannot guarantee full agreement. However, the data in this manual are

reviewed regularly and any necessary corrections included in subsequent

editions. Suggestions for improvement are welcomed.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including rights created by patent grant or registration of

an utility model or design, are reserved.

Siemens AG

Automation & Drives

SIMATIC Human Machine Interface

A&D PT1

Postfach 4848, D-90327 Nürnberg

ESiemensAG 2001

Technical data subject to change.

Siemens Aktiengesellschaft Order No. 6AV7691–0AA00–0AB0

Index-4 PanelPC 870 Computing Unit Equipment Manual

Edition 12/01

For your notes

Panel PC 870 Computing Unit Equipment Manual

Edition 12/01

Preface

About this manual

The SIMATIC Panel PC 870 Equipment Manual is part of the SIMATIC HMI

documentation and consists of two parts: operating unit and computing unit. It

provides information for operators, mechanics, planning engineers and

maintenance personnel about the computing unit’s installation, functionality,

operation and technical design.

Where to find what

The Computing Unit equipment manual contains the following chapters:

Chapter Content

1 Overview of the computing unit’s performance features

2 - 3 Starting up, connecting and operating the computing unit

4 - 5 Servicing, expanding and configuring the computing unit in the

BIOS setup

6Fault diagnosis

7Hardware information

8Remote mount form factor

Appendix A

STechnical Data

SESD Guidelines

Glossary

Index

Preface

vi PanelPC 870 Computing Unit Equipment Manual

Edition 12/01

Notation

The following conventions are used in this manual:

Motor off Text that is displayed on the operating unit is printed in

Courier type face.

Variable Symbolic names that stand for variable quantities that

appear on the screen are printed in Courier italic type face.

Screens Selectable functions are printed in standard italic type

face.

ESC Names of keys and buttons are shown in a different type

face.

History

Release Comments

07/01 Initial release of the SIMATIC Panel PC 870 –Computing Unit

equipment manual.

12/01 Extension to include ”Remote mount form factor”option of the

SIMATIC Panel PC 870 –Computing Unit equipment manual.

Trademarks

The following designations are registered trademarks of Siemens AG:

SSIMATICR

SSIMATIC HMIR

SHMIR

SProToolR

SProTool/LiteR

SProTool/ProR

SSIMATIC Multi PanelR

SSIMATIC Multifunctional PlatformR

SMP 270R

SProAgentR

Other Sources of Assistance

In the event of technical queries, please contact your Scontact partner at your

relevant agency or branch office.

Preface

vii

PanelPC 870 Computing Unit Equipment Manual

Edition 12/01

Automation and Drives, Service & Support

Der Service & Support von A&D ist weltweit jederzeit erreichbar.

The languages of the SIMATIC Hotlines are generally German and English, in

addition, French, Italian and Spanish are spoken on the authorization hotline.

Johnson City Nürnberg

Singapur

Service & Support

Technical Support Authorization–Hotline

Europe and Africa (Nurernberg)

Mon.–Fri. 7:00 to 17:00 (Local time, GMT +1)

Phone: +49 –(0) 180 –5050 –222

Fax: +49 –(0) 180 –5050 –223

E–Mail: [email protected]

Europe and Africa (Nuremberg)

Mon. –Fri. 7:00 to 17:00 (Local time, GMT +1)

Phone: +49 –(0) 911 –895 –7200

Fax: +49 –(0) 911 –895 –7201

E–Mail: [email protected]

America (Johnson City)

Mon. –Fri. 8:00 to 19:00 (Local time, GMT –5)

Phone: +1 –(0) 423 –262 –2522

Fax: +1 –(0) 423 –262 –2231

E–Mail: [email protected]

Asia and Australia (Singapur)

Mon. –Fri. 8:30 to 17:30 (Local time, GMT +8)

Phone: +65 –(0) 740 –7000

Fax: +65 –(0) 740 –7001

E–Mail: [email protected]

SIMATIC Premium–Hotline

Worldwide (Nuremberg)

on weekdays

0:00 to 24:00 (Local time, GMT +1)

Phone: +49 –(0) 911 –895 –7777

Fax: +49 –(0) 911 –895 –7001

E–Mail: [email protected]

quick call–back

guaranteed within max. 2 hours

(fee based, only with SIMATIC Card)

Preface

viii Panel PC 870 Computing Unit Equipment Manual

Edition 12/01

Training Center

To help you become familiar with SIMATIC S7 programmable controllers, we offer

training courses. Please contact your regional training center or the central training

center in D 90327 Nuremberg.

Phone: +49 (0) 911–895–3154

Infoline: Tel. +49 (0) 1805 23 56 11

Fax. +49 (0) 1805 23 56 12

Internet: http://www.sitrain.com

E–Mail: AD–T[email protected]

For information on high–availability SIMATIC S7 automation systems, the H/F

Competence Center in Nuremberg offers a special workshop. The H/F

Competence Center will also support you during configuring, start–up and in case

of any problems occurring at site.

Phone: +49 – (0) 911 – 895 – 4759

Fax: +49 – (0) 911 – 895 – 5193

E–Mail: hf–[email protected]

CoC–[email protected]

Technical Support Online Services

SIMATIC Customer Support provides you with a wide range of additional

information on SIMATIC products in the online services:

SYou can obtain general up–to–date information as follows:

–on the Internet: address http://www.siemens.de/simatic–net

–at fax polling no. +49 (0) 8765-93 02 77 95 00

SFor current product information, FAQs, tips and hints and downloads which may

be helpful for your application, see:

–On the Internet: address

http://www.siemens.de/automation/service&support

–From the bulletin board system (BBS) in Nuremberg (SIMATIC Customer

Support Mailbox) at the number +49 (0) 911 895-7100.

To dial the mailbox, use a modem with up to V.34 (28.8 Kbaud), with the

following parameters: 8, N, 1, ANSI, or dial on ISDN (x.75, 64 Kbits).

Preface

PanelPC 870 Computing Unit Equipment Manual

Edition 12/01

Further Support

If you have further questions about SIMATIC NET products, contact your local

Siemens representative.

You will find the addresses:

Sin our catalog IK PI

Son the Internet http://www.siemens.de/automation/partner

Sin our interactive catalog CA01

http://www.siemens.de/automation/ca01

Son our quick–start CD

Preface

xPanelPC 870 Computing Unit Equipment Manual

Edition 12/01

Altri manuali per Simatic PC Panel PC 870

Indice

Altri manuali Siemens Pannello touch

Siemens

Siemens SIMATIC HMI TP27 Documento tecnico

Siemens

Siemens PC 677B Manuale utente

Siemens

Siemens GAMMA instabus UP 588/12 Manuale di servizio

Siemens

Siemens Simatic PC Panel PC 870 Documento tecnico

Siemens

Siemens SIMATIC HMI TP 170A Documento tecnico

Siemens

Siemens SIMATIC HMI TP1200 Comfort Manuale utente

Siemens

Siemens POL8T5.70/STD Manuale dell'operatore

Siemens

Siemens LAE10 Manuale utente

Siemens

Siemens Climatix POL8T1.4X/STD Manuale dell'operatore

Siemens

Siemens SIMATIC INOX Series Guida per l'amministratore

Siemens

Siemens Climatix POL8T2.70/STD Manuale dell'operatore

Siemens

Siemens Simatic PC Panel PC 870 Manuale di installazione

Siemens

Siemens UP 588/12 Manuale utente

Siemens

Siemens SIMATIC OP 77B Manuale utente

Siemens

Siemens 5WG1205-2AB21 Manuale utente

Siemens

Siemens Simatic PC Panel PC 870 Documento tecnico

Siemens

Siemens SIMATIC TP900 Comfort INOX PCT Guida per l'amministratore

Siemens

Siemens 6AV3991-1AJ02-0AB0 Documento tecnico

Siemens

Siemens Climatix POL8T2.70/STD Guida utente

Siemens

Siemens SIMATIC HMI TP 070 Documento tecnico

Siemens

Siemens SIMATIC PC 670 Documento tecnico

Siemens

Siemens UP 588 Manuale utente

Siemens

Siemens ZIC-8B Manuale utente

Siemens

Siemens SIMATIC 677 Manuale utente

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente