Silicon Laboratories Si4010 Series Manuale utente

Si4010-Keyfob-AES-DEMO

Si4010 KEY FOB DEMO KIT WITH AES CAPABILITY

USER’SGUIDE

1. Purpose

Thank you for your interest in Silicon Laboratories’ Si4010 SoC RF key fob demo kit with AES capability. The

Silicon Laboratories Si4010 key fob demo kit with AES capability contains everything you need to familiarize

yourself with and evaluate the Si4010 RF SoC. The kit has two versions, one for the 434 MHz band and one for the

868 MHz band. The key features of the development platform are as follows:

The key fob demo board has five push buttons and one LED output, a PCB antenna, and a battery in a plastic

case.

The key fob uses hardware-accelerated 128-bit advanced encryption standard (AES) encryption and rolling

counter for RKE application.

The receiver demo board has a graphic LCD to display received key fob commands.

The provided software pack contains all the documentation and files needed to develop a user application. The

kit supports the use of Silicon Laboratories’ Integrated Development Environment (IDE) for software debugging

and the use of the Keil C compiler, assembler, and linker toolchain.

Contains demo applications using API functions and the key fob demo application.

2. Kit Contents

The kit contains the following items:

Qty Part Number Description

4010-DAAKF_434 Si4010 Key Fob Demo Kit with AES Capability 434 MHz

1 4010-DAPB_434 Si4010 Universal Key Fob 434 MHz

1 4313-DACB_ANY Si4313 LCD FSK/OOK Receiver any band

1 MSC-AT50-434 434 MHz Antenna

1 MSC-PLPB_1 Key Fob Plastic Case (translucent grey)

1 CRD2032 CR2032 3 V coin battery

1 MSC-DKSW1 Wireless Development Suite disc

4010-DAAKF_868 Si4010 Key Fob Demo Kit with AES Capability 868 MHz

1 4010-DAPB_868 Si4010 Universal Key Fob 868 MHz

1 4313-DACB_ANY Si4313 LCD FSK/OOK Receiver any band

1 MSC-AT50-868 868 MHz Antenna

1 MSC-PLPB_2 Key Fob Plastic Case (translucent red)

1 CRD2032 CR2032 3 V coin battery

1 MSC-DKSW1 Wireless Development Suite disc

Si4010-Keyfob-AES-DEMO

2 Rev 1.1

Figure 1. Si4010 Universal Key Fob and Plastic Case (P/N 4010-DAPB 868 and MSC-PLPB_1)

Figure 2. Si4313 LCD FSK/OOK Receiver Any-Band (P/N 4313-DACB ANY) with 434 MHz Antenna

(P/N MSC-AT50-434)



Si4010-Keyfob-AES-DEMO

Rev 1.1 3

3. Key Fob Demo with AES Capability

The 4010-DAPB RKE key fob transmitter and the Si4313 FSK receiver are the transmit and receive devices used

in this key fob demo. This transmit/receive pair can be used to evaluate the capabilities of the Si4010 transmitter

and the Si4313 receiver.

3.1. Operation of the Demo

The Si4313 demo receiver board uses the following RF parameters:

9.6 kbps

FSK modulation

433.92 MHz or 868.3 MHz center frequency (menu selectable)

±70 kHz deviation

If any push button is pressed on the key fob, it sends a message to the receiver. The demo uses Silicon Labs'

general EZMacPRO protocol.

3.2. Association

To enable the receiver to react to the button presses on the key fob(s), they have to be paired (i.e., the key fob has

to be associated to the receiver by pressing the left and right buttons simultaneously on the key fob).

3.2.1. Meanings of the Different Fields

AES—Defines whether the transmitter is using AES-128 encryption or not. It is set to 0x01; then, the Rolling

counter field of the packets is extended to 16 bytes length (12 dummy bytes are appended) and is encoded by

AES-128. Other fields of the packet are not affected by the encryption.

Address—4 bytes of key fob address. The four byte random number factory burned in the Si4010 is used as

the address.

Rolling Counter—The transmitter increments a 4 byte counter after every packet transmission. This counter is

stored in the MTP memory of the Si4010.

If the receiver accepts the association, it registers the Address, Master Key, and Rolling Counter value of the

requesting key fob.

The Master accepts the association if it is in pairing mode and there is a free slot for a key fob (i.e., if there are

fewer than four key fobs associated to the receiver).

After power up, the Receiver board is in pairing mode automatically. After pairing, it goes to normal packet

reception mode. The Pairing mode can be invoked by pressing the push button, PB3, on the Receiver Board. This

button needs to be pressed before the second and any subsequent pairing. If the PB is pressed for more than one

second, the receiver disassociates all key fobs.

Table 1. General EZMacPRO Extended Packet Configuration Used by Demo Key Fobs

Preamble SynchWord MACHeader MACPayload CRC

Min.13 bytes 2 bytes 5 bytes 0...64 bytes 2 bytes

0xAA...0xAA 0x2DD4 CTRL CID SID DID PL NHDR NWK payload CRC

Table 2. The MAC Payload Field of the “Associate Request from TX only Device” Packet

MACPayload

NHDR NWK Payload

1 byte 1 bytes 1 byte 1 byte 4 byte 4 byte

0x47 0x05 0x01 AES Address Rolling Counter

Si4010-Keyfob-AES-DEMO

4 Rev 1.1

3.3. Button is Pressed on the Key Fob

If any single button or button combination (except association combination) is pressed on the key fob, then it

transmits a key fob data packet showing the button number in the button field.

3.3.1. Meaning of the Different Fields

AES—Defines whether the transmitter is using AES-128 encryption. It is set to 0x01, then Button, Temp,

Battery, and Rolling counter fields of the packets are extended to 16 bytes length all together and are encoded

by AES-128. Other fields of the packet are not affected by the encryption.

Address—4 bytes of key fob address. The four-byte random number factory burned in the Si4010 is used as

the address.

Button—Each bit of this byte corresponds to the status of a push button on the key fob. If the bit is set, the

given button is pressed. If the bit is cleared, the button is released.

TEMP—The temperature is encoded as a signed 16-bit integer. Each incremental bit of temperature reading

represents 0.1 °C. If the temperature function is not implemented in the key fob, this field is set to 0xFFFF.

Battery—1 byte unsigned char showing the actual power supply status of the key fob. It must be interpreted as

follows:

LBD Available Bit—If set, the LBD status bit shows the actual status of the battery.

LBD Status—Shows whether the actual battery voltage is above the LBD limit (set if the actual voltage is below

the threshold). The LBD limit is configurable in the key fob program.

Battery Voltage Available—If set, the battery voltage information is available.

Battery Voltage—It shows the actual battery voltage of the key fob. Each increment of the battery voltage bit

corresponds to 50 mV. However, 0 represents 1.7 V.

Rolling Counter—The transmitter increments a 4 byte counter after every packet transmission. This counter is

stored in the MTP memory of the Si4010.

Since AES is used by the key fob, the receiver board decrypts the encrypted portion of the packet and discards the

dummy bytes. Then, the receiver board checks the sync counter value against its own copy of the sender key fob's

counter. If the key fob sync counter value minus the copy counter value is more than zero and less than a

configurable window value (default value is 10), the master increments the copy.

Table 3. The MAC Payload Field of the “Key Fob Data” Packet

MAC Payload

NHDR NWK payload

1byte 1byte 4bytes 1byte 2bytes 1byte 4byte

0x04 AES Address Button TEMP Battery Rolling Counter

1bit 1bit 1bit 5bits

Lbd Available LBD Status Battery Voltage Available Battery Voltage[4:0]

Si4010-Keyfob-AES-DEMO

Rev 1.1 5

3.4. Key Handling

Figure 3. SRW AES128 Applications Key Hierarchy

AES keys used in the demos are generated according to the hierarchy shown in Figure 3. Only the Application

level keys are stored on the receiver board. The function level keys are calculated at power-up. The Session level

keys are calculated at their first use.

In the key fobs Function level, keys are not generated but only stored to save power. The Session level keys are

calculated at each power up.

The Assoc_SK is used for association packets, and the Btn_SK is used for encrypting the messages generated by

a button press.

3.5. Key Fob Firmware Description

The complete project of the program used in the demo key fob can be found in the Si4010 documentation kit in the

“rke_demo” folder.

The key fob wakes up for button push or battery insert. If the battery was inserted, the vSys_FirstPowerUp() API

function is called, which shuts down the chip after 600 ms. This is for safe startup in case of battery contact

bouncing. Upon button push wakeup, the system variables and hardware control registers are initialized first, and

the session keys used in the AES encoding are generated from the function keys and the device address. Then,

button debouncing is made.

If a valid button push is detected, first a packet is assembled and transmitted six times for the LED receiver demo

board used in the Si4010 Simplified Key Fob Demo Kit (see details in “AN516: Si4010 Simplified Key Fob Demo

Quick Start Guide”). Then, a packet is assembled according to the description in the previous chapters. It is

transmitted in FSK modulation for the Si4313 receiver board (part of this kit), and then also in OOK modulation.

The next step is to increment the sync counter stored in the MTP memory.

If there is no valid button push detected for 3.2 s, the program shuts down the chip.

Application

Level

MK: Master Key

SK: Session Key

RKE_MK

Function

Level AES_128AES_128 AES_128Node_Association Node_ButtonPress Functionzzzzzzzz

Btn_K

Session

Level

FuncX_K

Assoc_K

AES_128 12byte padding(0) +

Node Addr

Assoc_SK

AES_128 12byte padding(0) +

Node Addr

Btn_SK

Si4010-Keyfob-AES-DEMO

6 Rev 1.1

3.5.1. Key Fob Firmware Flowchart

Figure 4. Key Fob Firmware Flowchart

Wake up

Battery

Insert? vSys_FirstPowerUp()Yes Shutdown

vSys_Setup( 15 )

Initialize application

Measure Vbat

Measure temp

Generate session keys

Button

pushed? Timeout?No

Shutdown

Yes

Assemble packet for the LED

demo

Yes

Is button

valid for

receiver?

Assemble packet for Si4313

Set RF parameters

Transmit packet

Set RF parameters

Transmit packet

Yes

Assemble packet for Si4313

Set RF parameters

Transmit packet

Increment sync

counter

Si4010-Keyfob-AES-DEMO

Rev 1.1 7

3.6. Receiver Board Firmware Description

The Si4313 RX board receives the packets from the Si4010 key fob, and, by the packet headers, it decides what

kind of packet was received. Two packet types can be received: association packets or button press packets. The

Si4313 RX board has two operation modes: Association mode and Button press mode. A key fob can only

associate when the Si4313 RX board is in Association mode. If the Si4313 is in Button press mode, then the

association packet will be discarded. During the first power up, the Si4313 RX board goes into Association mode,

and, after every key fob association, the firmware goes into Button press mode. The board can go back to

Association mode if the PB button is pressed. After an Si4010 key fob associates to the Si4313 RX board, the RX

board can receive the button press packets. At every packet reception, the firmware updates the LCD and sends

an indication message to the PC via the UART interface. The LCD displays the associated key fob serial numbers

and the number of the last button pressed on the key fob. However, the firmware stores more information about

each associated key fob, such as AES keys, temperature, battery level, etc. Figure 5 shows a flow chart of the

receiver board firmware.

Si4010-Keyfob-AES-DEMO

8 Rev 1.1

3.6.1. Receiver Board Firmware Flowchart

Figure 5. Basic Program Structure Block Diagram (1 of 2)

Si4010-Keyfob-AES-DEMO

Rev 1.1 9

Figure 6. Basic Program Structure Block Diagram (2 of 2)

For details on how to program the Si4010, see the following documentation:

Si4010 Data Sheet

AN370: Si4010 Software Programming Guide

Si4010 Development Kit User's Guide



Si4010-Keyfob-AES-DEMO

10 Rev 1.1

4. Demo Quick Start Guide

1. The first step is to insert the CR2032 battery into the key fob demo board and then place the board with the

battery into the plastic key fob case. Pushing any key will flash the LED on the key fob.

2. Connect the antenna into the SMA connector of the 4313-DACB_ANY receiver board.

3. Power up the Si4313 Receiver board by connecting it to the PC's USB port or by inserting batteries (3xAA) at

the back side of the board.

4. Switch the “S1” power supply switch to the proper position. If the board is supplied from the USB port, switch to

the “USB” state, or, if the board is supplied from the batteries, switch to the “Bat.” state.

5. After switching on the board, the LCD shows the Silicon Laboratories logo and the firmware version information.

The demo shows this information three times during the startup. This startup process can be skipped if any of

the PB1–PB3 button is pressed on the board.

6. On the next screen set the desired receive frequency using PB1 (+) and PB2 (–) buttons. Then step to the next

screen by pushing the PB3 (GO) button.

7. Wait until the following screen appears.

8. Pair the key fob with the Receiver board by pressing the LEFT and the RIGHT buttons together on the key fob.

If the key fob can be associated to the receiver board, then the serial number of the key fob appears on the

display.

Note: Only four key fobs can be associated at the same time to the receiver board. The PB3 button on the receiver board has

to be pressed shortly before every key fob association.

9. When the key fob is associated to the RKE receiver board, press any button on the key fob. The LCD screen

shows the number of the depressed button.



Altri manuali per Si4010 Series

Indice

Altri manuali Silicon Laboratories Microcontrollore

Silicon Laboratories

Silicon Laboratories C8051F930 Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F38 Series Manuale utente

Silicon Laboratories

Silicon Laboratories BB50 Manuale utente

Silicon Laboratories

Silicon Laboratories Telegesis ETRX357DVK Manuale utente

Silicon Laboratories

Silicon Laboratories SLWSTK6104A Manuale utente

Silicon Laboratories

Silicon Laboratories Wizard Gecko WGM110 Wi-Fi Wireless Starter... Manuale utente

Silicon Laboratories

Silicon Laboratories Si8410 Manuale utente

Silicon Laboratories

Silicon Laboratories CP250 Series Manuale utente

Silicon Laboratories

Silicon Laboratories Si8410 Manuale utente

Silicon Laboratories

Silicon Laboratories EFM32 EFM32GG11 Giant Gecko Series Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F540DK Manuale utente

Silicon Laboratories

Silicon Laboratories CP2501DK Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F91 Series Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F500 Manuale utente

Silicon Laboratories

Silicon Laboratories C8051T60x-DK Manuale utente

Silicon Laboratories

Silicon Laboratories EM34 Series Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F310DK-T Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F31 Series Manuale utente

Silicon Laboratories

Silicon Laboratories CP2400-DK Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F38 Series Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F35x Manuale utente

Silicon Laboratories

Silicon Laboratories EFM8BB3-SLSTK2022A Manuale utente

Silicon Laboratories

Silicon Laboratories UG464 Manuale utente

Silicon Laboratories

Silicon Laboratories EZR32WG Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente