Sim2 3DHOME Manuale utente
3D HOME
1
User Guide
Warnings and Installation
3
3D HOME
3
TABLE OF CONTENTS
1. CONTENTS 4
2. SAFETY WARNINGS 4
3. INTRODUCTION 4
3.1 What is 3DHOME 7
3.2 Box components 7
3.3 Description and installation 7
3.4 Connection 8
3.5 First switch-on and channel scan 9
4. REMOTE CONTROL 11
4.1 Optional component parts 11
5. USER INTERFACE 12
5.1 TV 13
5.1.1 TV functions 13
5.1.1.1 Time-Shift 14
5.1.1.2 Menù options 15
5.1.1.2.1 3D Menù 16
5.2 Video Recorder 17
5.2.1 Manual Schedule 17
5.2.2 Scheduling 19
5.3 Media library 20
5.3.1 Music 20
5.3.2 Recordings 21
5.3.2.1 Real-Time recordings 22
5.3.3 Video 23
5.3.4 Images 23
5.4 Web 25
5.5 Setup 25
5.5.1 Language 25
5.5.2 Audio 26
5.5.3 Video 26
5.5.4 Date 26
5.5.5 TV Settings 26
5.5.5.1 TV Channel Scan
with Terrestrial 3DHOME 27
5.5.5.2 TV Channel Scan
with Satellite 3DHOME 28
5.5.5.3 Scanning 31
5.5.6 Network 31
5.5.6 Update 33
5.5.7 Recovery 35
6. TECHNICAL SPECIFICATIONS 38
7. SECURITY PACKAGE 40
Sim2 Multimedia - Versione 2.0 luglio 2011
3D HOME
4
5
1. CONTENTS
Inside information
This operating manual has been specially developed for 3DHOME use. The inside
information have been carefully verified; nevertheless the contents accuracy is not
assured, because of the changes that may occur without notice.
Copyright 2011
This operating manual contains intellectual property information, protected by
copyright laws. All rights are reserved. Do not reproduce any part of this document,
by mechanical, electronic or any other means, in any form, unless with the previous
producer authorization.
Trademark
All the trademarks and registered trademarks are recognized properties of their
respective owners.
2. SAFETY WARNINGS
The lightning symbol, inside the triangle, aims to warn the user of not
insulated dangerous voltages, inside the product, that may expose
people to a risk of electrical discharge.
The exclamation mark, inside the triangle, aims to warn the user of
outstanding operating and repairs instructions in the documents of
the set.
Caution
In order to reduce fire and electric shock hazards, do not expose this equipment to
the rain or to the moisture. Do not open the covering. Address to trained staff for
repairs.
Power
The 3DHOME set-top box must be only powered with the supplied power pack.
The power pack must be only connected to a 220 Volt ~, 50Hz socket.
Do not remove the receiver covering.
!
4
3D HOME
5
The unauthorized covering removal is a cause of immediate guarantee forfeiture!
Power cable
• In order to mount the equipment, first test the power cable integrity. Should
it be damaged, do not connect it to the device and address to the customer
service.
• Mount the power cable so as not to cause its squashing with objects on and
by it. Furthermore avoid placing it next to passing areas, where it could acci-
dentally be trampled, pulled out or anyhow damaged.
• Should the cable be damaged, carefully disconnect the receiver from the sup-
ply socket and address only to trained staff or to the customer service in order
to make it be repaired.
Liquids
• Keep the product away from any kind of liquid. Do not put on it objects with
liquids inside, such as pots or moistener dampener and so on.
• Do not place it where it could come into contact with liquid splash or squirt, or
in any case do not put it in rooms with a high damp level, subject to moisture
concentrations.
• Should the receiver accidentally come in contact with liquids, immediately pull
out the plug from the socket. DO NOT HANDLE the device before it will have
been disconnected.
Cleaning
• In order to clean the set-top box, first pull the device out of the socket.
• In order to clean the outside of the receiver, use a smooth and dry cloth; or
slightly damp it with water. Avoid the use of chemical products or solvents.
Ventilation
• Assure yourself that the place where the set-top box will be mounted is well
aired, so to allow enough heat dispersion and so to avoid over-heating.
• In order to allow an adequate ventilation, keep a 0.33 feet (10 cm) minimum
free room at the set-top box sides and a 0.48 feet (15 cm) minimum free room
over the set-top box.
• The airing fissures must be free, not obstructed with objects, such as new-
spapers, tablecloths, furnishing cloths and so on. Do not mount the receiver
next to heat sources (such as radiators, heaters and so on) or upon other
equipments that generate heat (such as video recorders, DVD players and so
on).
3D HOME
6
7
Safeguard
• Keep the product out of reach of children.
• Plastic packaging could be dangerous. In order to avoid chocking problems,
keep the bags out of reach of children.
• The device must be put on a sound and safe base.
• Hook up the receiver only after having accomplished the installation.
KEEP ATTENTION TO THE OPERATING MANUAL BEFORE
USING THE DECODER.
In order to make report procedures smoother in case of set-top box loss or theft,
note down the serial number, on the bottom side of the 3DHOME receiver. Before
recycling the packaging, assure yourself of having carefully checked the set com-
ponents, using the special list in the relevant Set components section.
Symbols explanation
Waste disposal:
In order to dispose of electrical and electronic equip
ments do not use the municipal waste system. Address
instead to an authorized reception centre, in charge of
the electrical and electronic equipments handling.
This product is made in compliance with the EMI 2004/108/EC
directives and with the directives on the 2006/95/EC low voltage
equipments.
6
3D HOME
7
3. INTRODUCTION
3.1 WHAT IS 3DHOME
3DHOME is a new generation system, that gets together, in a single equipment,
all the household devices normally used for the multimedia files vision, recording
and filing. 3DHOME includes and integrates in a single box a TV receiver device
(Digital Terrestrial Television or Satellite TV, depending on the different box type); a
digital video recorder to catch up the broadcasted images; a flexible media-library
in order to watch videos and photos and to listen to the music by means of USB
outer devices; a complete, but simple, Internet access tool, in order to surf the Net
and to tune the TV through the Internet.
3DHOME is a cutting edge solution specially conceived for the multimedia services
integration, with an high usability level.
3DHOME is a tool that upgrades the converging of entertainment and communication
applications.
3.2 Box components
Open the box and assure yourself it includes all the following items:
Accessories box: Remote Control
“AAA” Batteries
Power Cable
Operating Manual
Outside power pack
3.3 Description and installation
The front section of the product is made up with the following parts:
1
2
3
3D HOME
8
9
1. Switch-on button with switching-on LED marker;
2. Remote control receiver;
3. Access to USB front doors, in order to read photos and videos and to listen to
audios, while in supported formats.
Warning
• 3DHOME is consistent with USB memory devices, formatted with FAT and
NTFS file systems.
• The full compatibility with all the USB memory devices in the market is not
assured.
The back section of the Terrestrial 3DHOME is made up with the following parts:
1. Connector for the supplied outside power pack
2. Connectors for outside keyboard and mouse
3. A sequence of USB doors
4. LAN connector
5. Audio analogical output connector;
6. DVI connector
7. Digital Output
8. VGA connector
9. Aerial RF connector
The other possible connectors are back connectors, not addressed to the user
needs. Therefore, they have not to be used.
The back section of the Satellite 3DHOME is made up with the following parts:
1
2
3 4 5 6 7 8 9
1
2
3 4 5 6 7 8 10
9
8
3D HOME
9
1. Connector for the supplied outside power pack;
2. Connectors for outside keyboard and mouse;
3. A sequence of USB doors;
4. LAN connector;
5. Audio analogical output connector;
6. DVI connector;
7. Digital Output;
8. VGA connector;
9. LNB IN connector for the Satellite dish connection;
10. LNB OUT connector for the loop-through connection to another decoder.
3.4 Connection
Warning
As a rule, the connections among the device, the TV and the aerial come before
the connection between the device and the power pack. In fact, with the receiver
below voltage, electrical potential gaps can occur during the connectors input.
These gaps could generate currents dangerous for the devices.
Here, in the picture below, the basic connections to make:
1. (3D-HOME) Connect the terrestrial aerial to the RF-IN connector (9);
(3D-HOME-SAT) Connect the satellite aerial to the LNB-IN connector (9);
2. Connect the TV to the Digital OUT connector (7), supplied with video and audio
support. Connect other possible peripheral devices;
3. Build the possible LAN net connection (4);
4. Connect the USB peripheral storage with audio and video files to the connectors
(3);
1
2
3 4 7 9
3D HOME
10
11
5. Connect the possible keyboard and mouse (2);
6. Lastly connect the outside power pack by means of the proper connector (1).
After all this procedure, put the power pack socket in and switch-on the device,
pushing the switch-on button. Wait for the start-up performance execution.
Warning
In order to connect the TV and the decoder, use a HDMI cable.
3.5 First switch-on and channel scan
For the first switch-on, follow the instructions below:
1. Read the instructions on the remote control use (p. 11) and on the user interface
(p. XX);
2. Highlight the Setup entry in the main menu (5.5 paragraph, p. 25);
3. Highlight the TV Settings entry (5.5.5 paragraph, p. 26);
4. Highlight the Channel Scan entry (5.5.5.1 and 5.5.5.2 paragraphs, pp. 27, 28);
5. Highlight the Automatic Scan and then push the button Start Scan;
6. When the scanning is accomplished, the channel list is displayed;
7. If necessary, highlight the different channels in order to delete them or to change
their position.
Indice
