Sindoh A1 Series Manuale utente

● This user manual contains the product warranty inside.

● Please read this user manual before using this product

and keep the manual nearby.

User Manual

Sindoh A1 Series

3dprinter.sindoh.com

Do not plug the power cord into extensions. Plug the cord directly into the wall socket.

If the power cable or plug is worn or damaged, pull out the power plug.

The exposure of the interior of the machine can cause electric shock or burns.

Exposure to inside the machine can cause electric shocks or burns. To prevent this damage,

do not remove any cover or screws other than those specified in this manual.

Do not place the machine in a highly moist environment as it may cause deformation and

malfunction.

Avoid contact of electrical terminal with metal product such as necklaces, coins, keys,

watches, etc.

Do not hold the interior parts to lift or move the machine.

Turn off the power and pull out the power plug under the following circumstances;

When in contact with liquid

When in need for a service or repair request

When the device cover is damaged

For the method of disposal contact local service center or use a proper collection site.

Please turn off the power when leaving the office after business hours or in circumstances

when machine is unoccupied for a long time as it may cause abrupt fire accidents.

Protect device from humid or wet conditions eg. rain, snow, etc

Remove power cord from receptacle on the wall before moving device.

Be careful not to damage power cord while machine is being moved.

When removing the power cord, please pull the plug and not the power cable.

Be cautious of clips, staples and any other small metal objects from falling inside the machine.

Please be cautious on safety when touching the interior of the machine, e.g. cleaning the

interior.

Do not dispose of device or consumables together with household waste.

For the method of disposal, please contact local service center or use a proper collection site.

Our product and its components maintain high quality standards and performance. It is

recommended to use only the genuine components delivered by authorized distributors if

necessary.

This equipment is not suitable for use in locations where children are likely to be present.

Please make sure to follow the instructions below when using the machine.

Safety Instructions

Warning: Failure to observe the instructions may lead to death or serious injury.

Caution:Failure to observe instructions may cause injuries or damages to property.

Thank you for purchasing our product.

This user manual contains detailed information about correct use of machine and easy

maintenance to maintain the optimal state, and to contribute to the rationalization of office

work of your company

Please carefully read the user manual before using the machine and keep close at hand.

In order to use the machine correctly and safely, please carefully note the precautions before use.

Before using the machine

Prohibition and limitation

1. This User Manual has been created for the convenience of the user, actual product

may differ from image and explanations shown.

2. The contents of this user manual is subject to change without notice. We are not

responsible for the direct and/or indirect loss or damages caused by results of handling

or operating the product in any case and for results occurring from user’s negligence.

3. The copyrighted literary works can be duplicated and used for personal use or

household use and within the same parameter. In other cases than the

aforementioned, it is prohibited by law.

4. The above details present only a part of the applicable laws and regulations.

Details on these laws/regulations may not be stated as they are. We do not guarantee

its correctness and completeness. Please consult a legal advisor to check if the object

you intend to print is legal.

5. User is responsible for all loss derived from modification of the product executed by

the user or third party.

6. Font used in the printer GUI and the user manual is the “NANUM” font provided by NAVER.

Before using the machine

1. Preface ------------------------------------------------------------------------------------------------------------------ 1

2. Conventions ---------------------------------------------------------------------------------------------------------- 2

Symblos ----------------------------------------------------------------------------------------------------------------- 2

3. Safety Information -------------------------------------------------------------------------------------------------- 3

4. Precautions ----------------------------------------------------------------------------------------------------------- 7

4.1 Installation -------------------------------------------------------------------------------------------------------------- 7

4.2 Leveling Machine ----------------------------------------------------------------------------------------------------- 8

4.3 Moving the Machine ------------------------------------------------------------------------------------------------- 9

5. Handling Consumables------------------------------------------------------------------------------------------- 10

5.1 SLA Resin (Photo Curable Resin) --------------------------------------------------------------------------------11

5.2 Isopropyl Alcohol, IPA ------------------------------------------------------------------------------------------------12

6. Instructions for Use ------------------------------------------------------------------------------------------ 13

7. Ventilation -------------------------------------------------------------------------------------------------------------15

8. Notices ------------------------------------------------------------------------------------------------------------------16

9. Disposal of Used Battery----------------------------------------------------------------------------------------- 19

10. Wifi Module Disclaimer ------------------------------------------------------------------------------------------- 20

11. USB Flash Drive Disclaimer------------------------------------------------------------------------------------- 22



Chapter 1. Preparation for Machine Operation

1. Specifications--------------------------------------------------------------------------------------------------------1-2

1.1 Printing -----------------------------------------------------------------------------------------------------------------1-2

1.2 Machine ------------------------------------------------------------------------------------------------------- 1-2

1.3 Software/Support

------------------------------------------------------------------------------------------- 1-2

2. Components----------------------------------------------------------------------------------------------------------1-3

2.1 Basic Components ---------------------------------------------------------------------------------------------------1-3

2.2 Finishing Kit (Optional)----------------------------------------------------------------------------------------------1-4

2.3 Resin Cartridge (Optional) -----------------------------------------------------------------------------------------1-5

3. Understanding the parts -----------------------------------------------------------------------------------------1-6

4. Installation (Incl. Connection, Cartridge Setup and S/W Installation)-----------------------------1-9

4.1 Device Connection ---------------------------------------------------------------------------------------------------1-9

4.2 S/W Installation --------------------------------------------------------------------------------------------------- 1-12

4.3 Resin Cartridge Installation ------------------------------------------------------------------------------------ 1-14

Contents

Chapter 2. UI Menu Function

1. UI Menu Function Descriptions ------------------------------------------------------------------------------ 2-2

1.1 Home ------------------------------------------------------------------------------------------------------------------- 2-3

1.2 Cartridge--------------------------------------------------------------------------------------------------------------- 2-4

Change----------------------------------------------------------------------------------------------------------------- 2-4

1.3 Setting---------------------------------------------------------------------------------------------------------------- 2-10

XY Scale ------------------------------------------------------------------------------------------------------------- 2-11

Z Offset -------------------------------------------------------------------------------------------------------------- 2-14

Chamber Heating ------------------------------------------------------------------------------------------------- 2-16

Resin Auto Supply------------------------------------------------------------------------------------------------- 2-18

Platform Leveling -------------------------------------------------------------------------------------------------- 2-20

Auto Platform Leveling ------------------------------------------------------------------------------------------- 2-25

Cloud Monitoring -------------------------------------------------------------------------------------------------- 2-27

Level Printer -------------------------------------------------------------------------------------------------------- 2-28

First Raft Laser Power ------------------------------------------------------------------------------------------- 2-32

Network ------------------------------------------------------------------------------------------------------------- 2-34

Test Print ------------------------------------------------------------------------------------------------------------ 2-38

S/W Update --------------------------------------------------------------------------------------------------------- 2-40

General Setting ---------------------------------------------------------------------------------------------------- 2-42

1.4 Saved Files---------------------------------------------------------------------------------------------------------- 2-46

1.5 Info -------------------------------------------------------------------------------------------------------------------- 2-50

1.6 Quick Guide--------------------------------------------------------------------------------------------------------- 2-53

1.7 Programs ------------------------------------------------------------------------------------------------------------ 2-54

1.8 Cloud ----------------------------------------------------------------------------------------------------------------- 2-56

Chapter 3. Printing

1. Printing --------------------------------------------------------------------------------------------------------------- 3-2

1.1 Printing from USB Flash Drive ----------------------------------------------------------------------------------- 3-2

1.2 Printing via PC ------------------------------------------------------------------------------------------------------- 3-8

1.3 Web Monitoring ------------------------------------------------------------------------------------------------------ 3-8

1.4 Cloud Monitoring -------------------------------------------------------------------------------------------------- 3-10

1.5 Changing Resin---------------------------------------------------------------------------------------------------- 3-15

Chapter 4. Checking Printed Output

1. Checking Printed Output---------------------------------------------------------------------------------------- 4-2

1.1 Detaching Printed Output ----------------------------------------------------------------------------------------- 4-2

1.2 Finishing the Printed Output -------------------------------------------------------------------------------------- 4-5

1.3 Preparing the Next Print ------------------------------------------------------------------------------------------- 4-7

1.4 Enhancing Print Quality-------------------------------------------------------------------------------------------- 4-8

2. When Printer Can’t be Turned ON---------------------------------------------------------------------------- 4-9

3. If problems Persist ---------------------------------------------------------------------------------------------- 4-10

Chapter 5. Maintenance

1. Machine Cleaning-------------------------------------------------------------------------------------------------- 5-2

1.1 Printer Interior Cleaning ------------------------------------------------------------------------------------------- 5-2

1.2 Periodical Inspection ----------------------------------------------------------------------------------------------- 5-2

Oil/Grease Inspection ---------------------------------------------------------------------------------------------- 5-2

1.3 Platform --------------------------------------------------------------------------------------------------------------- 5-3

1.4 Resin Tank ------------------------------------------------------------------------------------------------------------ 5-5

Resin Tank’s Life----------------------------------------------------------------------------------------------------- 5-5

Checking the Resin Tank ------------------------------------------------------------------------------------------ 5-5

Cleaning the Resin Tank------------------------------------------------------------------------------------------- 5-6

1.5 Protective Glass ----------------------------------------------------------------------------------------------------- 5-9

1.6 Resin Cartridge ---------------------------------------------------------------------------------------------------- 5-11

Managing the Resin Cartridge --------------------------------------------------------------------------------- 5-11

Storing the Resin Cartridge ------------------------------------------------------------------------------------- 5-11

Cleaning Smart ID Terminals ----------------------------------------------------------------------------------- 5-11

1.7 Orange Cover ------------------------------------------------------------------------------------------------------ 5-13

Opening the Orange Cover ------------------------------------------------------------------------------------- 5-13

Closing the Orange Cover -------------------------------------------------------------------------------------- 5-13

Cleaning the Orange Cover ------------------------------------------------------------------------------------ 5-14

2. Error Messages and Solutions ------------------------------------------------------------------------------ 5-15

3. Problems and Solutions--------------------------------------------------------------------------------------- 5-16

3.1 If the Resin Is Not Properly Supplied------------------------------------------------------------------------- 5-16

Checking the Auto Resin Supply Function ----------------------------------------------------------------- 5-16

Checking the Smart IC Chip and Terminals of the Resin Cartridge ---------------------------------- 5-16

Checking the Transparent Windows for Level-Detect Sensors ---------------------------------------- 5-17

Checking the Resin Level–Detect Sensors ----------------------------------------------------------------- 5-17

Checking the Tube Connection -------------------------------------------------------------------------------- 5-18

Third-Party Resin-------------------------------------------------------------------------------------------------- 5-18

Emptying the Resin Cartridge ---------------------------------------------------------------------------------- 5-18

In Case of Opening the Orange Cover during Printing -------------------------------------------------- 5-18

3.2 Actions in Case of a Printing Failure ------------------------------------------------------------------------- 5-19

Removing Failed Print ------------------------------------------------------------------------------------------- 5-19

Cleaning the Resin Tank and Platform ----------------------------------------------------------------------- 5-19

3.3 If Noise is Generated from the Lead Screw of Platform ------------------------------------------------- 5-20

4. Replacing consumables and important components ----------------------------------------------- 5-21

4.1 Replacing the Resin Cartridge --------------------------------------------------------------------------------- 5-21

4.2 Replacing the Platform------------------------------------------------------------------------------------------- 5-25

4.3 Replacing the Resin Tank --------------------------------------------------------------------------------------- 5-27

Replacing the Resin Tank --------------------------------------------------------------------------------------- 5-27

Replacing the Release Film ------------------------------------------------------------------------------------ 5-30

Before Using the Machine

1. Preface

This user manual describes detailed explanations and points to note in operating the machine. Please read

the user manual very carefully before starting use of the machine, and keep it for reference purpose at close.

Important

The content of the user manual is subject to be changed without any prior notifications.

Sindoh shall not be liable for consequential, special, indirect damages or losses caused by the handling or

operating of the machine or by the user’s negligence.

Copyrighted works can be printed and used for home and/or personal use; other usage is prohibited by law.

The above details present only a part of the applicable laws and regulations and the details of the law

may not stated as they are. Sindoh is not responsible for its correctness and completeness.

Please consult your legal advisor to check if the object you intend to print is legal.

Note

The user manual may include a little different descriptions of the machine from the actual one.

Some options may not be available in some countries. Please contact local distributor for details.

Some standard units are optional in some countries.

Please consult your local service center.

In some countries, some models are not available.

Please consult your local sales office.

This manual uses metric units of measurements.

Font used in the user manual is the “NANUM” font provided by NAVER.

Before Using the Machine

2. Conventions

Symbols

The following symbols are used in this manual and their definitions are as follow.

Warning

Indicates important safety notes.

Ignoring these notes could result in serious injury or death.

Be sure to read these notes carefully for your safe operations of the machine.

Caution

Indicates important safety notes.

Ignoring these notes could result in minor injury or damage to the machine or to property.

Be sure to read these notes carefully for your safe operations of the machine.

Important

Indicates points to pay attention to when using the machine, and explanations of likely causes of resin

misuse, damage to originals, or loss of data.

Be sure to read these explanations before operating the machine.

Note

Indicates supplementary explanations of the machine’s functions, and instructions on resolving user

errors.

Reference

This symbol comes at the end of the paragraph and indicates where relevant content is located.

[ ]

Indicates the messages or menus that appear on the machine’s UI.

【】

Indicates the names of each function keys on the machine control panel and UI.

Altri manuali per A1 Series

Indice

Altri manuali Sindoh Stampante 3D

Sindoh

Sindoh A1SD Series Manuale utente

Sindoh

Sindoh D330A Series Manuale utente

Sindoh

Sindoh 3Dwox DP200 Guida alla risoluzione dei problemi

Sindoh

Sindoh DP200 Series Manuale utente

Sindoh

Sindoh A1 Series Manuale utente

Sindoh

Sindoh 3DWOX 2X Manuale utente

Sindoh

Sindoh 3DWOX 1 Manuale utente

Sindoh

Sindoh DP201 Series Manuale utente

Sindoh

Sindoh 5X Series Manuale utente

Sindoh

Sindoh 3DWOX-1 Manuale utente

Sindoh

Sindoh 3DWOX 5X Manuale utente

Sindoh

Sindoh DP203 Manuale utente

Sindoh

Sindoh DP201 Series Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente