GTJZ0407SE Operation Manual i© Oct 2021
TABLE OF CONTENTS
Introduction ............................. iii
1 Performance Parameters ...... 1-1
2 Machine Components .......... 2-1
3 Safety............................... 3-1
Safety Definitions .. ... . . . .. . . . . ... . . .. 3-1
Reporting Accidents... . . . .. . . . . ... . . .. 3-1
Electrocution Hazards. .. . . . ... . . ... . . . 3-2
Tipping Hazards and Rated Load . . . .. 3-2
Work Environment Hazards.. . . . .. . . . . 3-4
Unsafe Operation Hazards. . . .. . . . ... . 3-5
FallHazards...........................3-6
Collision Hazards .. . ... . . ... . . . ... . . . . 3-6
Crush Hazards . . . ... . . . ... . . ... . . ... . . 3-7
Explosion and Fire Hazards. . . ... . . ... 3-8
Damaged Machine Hazards ... . . . .. . . 3-8
Bodily Injury Hazards . . . ... . . ... . . . .. . 3-8
Battery Hazards.. . . ... . . . .. . . . . ... . . .. 3-9
Welding and Polishing Requirements3-10
After Using the Machine. ... . . . .. . . . ..3-10
4 Jobsite Inspection............... 4-1
5 Pre-operation Inspection ...... 5-1
Tips for Conducting a Pre-operation
Inspection.............................5-1
Conducting a Pre-operation
Inspection.............................5-2
Inspecting Parts. . . . ... . . . .. . . . . ... . . .. 5-2
Inspecting Entire Machine ... . . . .. . . . . 5-2
Inspect Hydraulic Oil Level. . . ... . . ... . 5-2
Inspect Battery Level. . . ... . . ... . . ... . . 5-3
6 Pre-operation Function Test .. 6-1
Preparing for a Pre-operation Func-
tionTest...............................6-1
Testing the Ground Controller (CAN-
PLUS/DTC system-K300). . . ... . . ... . . 6-1
Testing the Ground Controller
Function ............................6-2
Testing the Emergency Stop
Function ............................6-2
Testing the Lifting and Lowering
Functions...........................6-2
Testing the Ground Controller
（SINOBOOM/DTC system-K500）.. 6-2
Testing the Platform Controller (DTC). 6-3
Testing the Platform Controller
(CANPLUS)...........................6-6
Testing the Platform Controller
(SINOBOOM) ... . . . .. . . . . .. . . . ... . . . .. 6-8
Testing the Drive Speed.. . . . ... . . ... .6-10
Testing the Emergency Lowering
Function..............................6-11
Testing the Tilt Protection Function . .6-12
Testing the Pothole Guard .. . . ... . . . .6-13
Testing the Weighing System
(optional) ... . . . .. . . . ... . . . .. . . . . .. . . . .6-13
7 Operating the machine ......... 7-1
Emergency Stop .. . . . ... . . ... . . . .. . . . . 7-1
Using the Emergency Lowering
Feature................................7-2
Emergency Towing/Dragging ... . . ... . 7-2
Operation from Ground . . ... . . . ... . . . . 7-3
Operation from Platform . .. . . . . ... . . .. 7-3
Operating with the Platform Control-
ler on the Ground . .. . . . . .. . . . ... . . ... . 7-5
Extending/Retracting the Platform . . . . 7-5
Folding/Unfolding the Rails .. . . ... . . .. 7-5
Driving on a Slope.. ... . . . .. . . . . .. . . . .. 7-5
Charging the Battery . . . . ... . . ... . . . .. . 7-6
