SKYDANCE R1 Manuale utente

● Apply to single color or dual color LED controller.

● Each remote can match one or more receiver.

● R bC 2032 attery powered.

● Operate with LED indicator light.

● Magnet on the back which can be easily stuck on back holder or any metal surfaces.

Technical Parameters

Input and Output

Warranty

5 years

Warranty

Operation temperature

Case temperature (Max.)

Environment

IP20

IP rating

Ta: -30

C ~ +55

T c: +85

Model No.: R1/R2/RU4/RU8

Features

1,4,8 zone dimming/10-key/Wireless remote 30m distance/CR2032 battery/Magnet stuck ﬁx

10-Key RF Remote Controller

R1 R2

Output signal RF 2.4GHz( )

Working voltage 3VDC CR2032( )

Working current ＜5mA

Standby current ＜2μA

Standby time 2 years

Remote distance 30m

Safety and EMC

EMC standard (EMC) EN301 489,EN 62479

Radio Equipment(RED) EN300 328

Certification CE,EMC,LVD,RED

EN60950

Safety standard(LVD)

LVDRED

1 Zone Dimming 1 Zone CCT

RU4

4 Zone Dimming

RU8

8 Zone Dimming

User Manual Ver 1.0.2 www.iskydance.com Page 1

Mechanical Structures and Installations

Match Remote Control (two match ways)

Use the controller’s Match key

Match:

Short press match key, immediately press on/off

key (single zone remote) or zone key (multiple zone

remote) of the remote.

Use Power Restart

Match:

Switch off the power, then switch on power again,

immediately short press on/off key (single zone remote)

or zone key (multiple zone remote) 3 times on the remote.

The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again,

immediately short press on/off key (single zone remote)

or zone key (multiple zone remote) 5 times on the remote.

The light blinks 5 times means all matched remotes were

deleted.

Delete:

Press and hold match key for 5s to delete all match,

The light blinks 5 times means all matched remotes

were deleted.

End user can choose the suitable match/delete ways. Two options are offered for selection:

11mm

135mm

40mm

Note: Before the first use,

please remove the protective film on the battery.

53.50 mm

CR2032 Battery

To fix the remote, three options are offered for selection:

Option 1: stuck the remote on any metal surfaces directly.

Option 2: fix the remote' back holder on the wall with two screws.

Option 3: adhere the remote' back holder to the wall with paster.

Back holder with magnet

User Manual Ver 1.0.2 www.iskydance.com Page 2

R1,R2,RU4,RU8 10-Key RF Remote Controller

Color temperature+ -:/

Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.

Brightness+/-:

Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.

Scene 1/2 :

, .Short press recall the scene long press 2s save the current color into the scene

S1 S2

CT+

WW CW

On/Off Natural white

Warm white Cool white

Brightness-Brightness+

Scene1 Scene2

Color

temperature-

Color

temperature+

R2 1 zone CCT remote●

LED indicator

Brightness+/-:

Short press 10 levels,

long press 1-6s for continuous 256 levels adjustment.

Scene 1/2:

brightness memory.

,Short press recall the scene

long press 2s save the current brightness into the scene.

S1 S2

Small Night light

Brightness+

Scene2

Brightness 50％

Brightness 100％

On/Off

Brightness 25％

Brightness-

Scene1

Brightness 75％

LED indicator

R1 1 zone dimming remote●

Key function

User Manual Ver 1.0.2 www.iskydance.com Page 3

R1,R2,RU4,RU8 10-Key RF Remote Controller

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.

A long time without the remote control, remove the battery.

When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.

ON OFF

OFF

ON OFF

Al l

All on All off

Zone1 on Zone1 off

Zone2 on

Zone2 off

Zone3 on Zone3 off

Zone4 on Zone4 off

All on: Turn on all 4 zone light .

All off: Turn off all 4 zone light .

Zone 1 4 on -:

Short press turn on zone light,

long press 1-6s increase brightness continuously.

Zone 1 4 off -:

Short press turn off zone light,

long press 1-6s decrease brightness continuously.

.All on: Turn on all 8 zone light

All off: Turn off all 8 zone light .

Zone 1-8 on/off:

Short press turn on/off zone light,

long press 1-6s increase or decrease

brightness continuously.

Zone1 on/off

All on All off

Zone3 on/off

Zone5 on/off

Zone7 on/off

Zone2 on/off

Zone4 on/off

Zone6 on/off

Zone8 on/off

OFF

Al l

1 2

7 8

RU4 4 zone dimming remote●

RU8 8 zone dimming remote●

R1,R2,RU4,RU8 10-Key RF Remote Controller

LED indicator

User Manual Ver 1.0.2 www.iskydance.com Page 4

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SKYDANCE Telecomando

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione