SKYDANCE V2 Manuale utente
● One controller can accept up to 10 remote control.
● Auto-transmitting function: Receiver could transmit
signal to another receiver within 30m,
and the total remote control distance can up to 100m.
● Match with all Skydance’s 2.4G color temperature
remote control.
Feature
User Manual Ver 1.0.2 2018.09.29 Page 1
www.iskydance.com
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
RF 2.4GHz
30m
4096 levels
0 -100%
Technical Parameters
Output power 2x(60-120)W
Output voltage 2x(12-24)VDC
Output current 2CH,5A/CH
Input and Output
Input voltage 12-24VDC
Input current 10.5A
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Safety standard(LVD) EN300 328
Certification CE,EMC,RED
EN60950
Safety standard(LVD)
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Input signal
Control distance
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
RED
Model No.: V2
Dual Color LED Controller
2 Channel / Step-less dimming / RF remote / Push Dim
V2 Dual Color LED Strip Controller
97mm
33mm
18mm
Mechanical Structures and Installations
LED indicator
Match key
Installation rack
Installation rack
User Manual Ver 1.0.2 2018.09.29 Page 2
www.iskydance.com
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
AC100-240V
Power Supply
12-24VDC
Constant Voltage
V2
2CH LED Controller
+
IN PU T
12 -24 VD C
OU TP UT
+
+ W2W1 +
+
WW CW
+
CW
WW Dual color LED strip
Output LED +
Output LED +
Cool white LED -
Warm white LED -
Power Input -
Power Input +
V2 Dual Color LED Strip Controller
User Manual Ver 1.0.2 2018.09.29 Page 3
www.iskydance.com
Malfunctions Analysis & Troubleshooting
Malfunctions
Causes Troubleshooting
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
Uneven intensity
between front and
rear,with voltage drop
Altri manuali SKYDANCE Telecomando
SKYDANCE
SKYDANCE RT1 Manuale utente
SKYDANCE
SKYDANCE RA5 Manuale utente
SKYDANCE
SKYDANCE PK1 Manuale utente
SKYDANCE
SKYDANCE T1-KB Manuale utente
SKYDANCE
SKYDANCE R9 Manuale utente
SKYDANCE
SKYDANCE R2 Manuale utente
SKYDANCE
SKYDANCE RT1 Manuale utente
SKYDANCE
SKYDANCE RGBW4ZTC Manuale utente
SKYDANCE
SKYDANCE RS8 Manuale utente
SKYDANCE
SKYDANCE T1-K Manuale utente
SKYDANCE
SKYDANCE R9 Manuale utente
SKYDANCE
SKYDANCE RT5 Manuale utente
SKYDANCE
SKYDANCE T20 Manuale utente
SKYDANCE
SKYDANCE R21 Manuale utente
SKYDANCE
SKYDANCE T25-1 Manuale utente
SKYDANCE
SKYDANCE R9 Manuale utente
SKYDANCE
SKYDANCE R7 Manuale utente
SKYDANCE
SKYDANCE R1 Manuale utente
SKYDANCE
SKYDANCE R17 Manuale utente
SKYDANCE
SKYDANCE R17 Manuale utente
