SMART Board 6000 series Manuale utente

Help us make this document bett er

smarttech.com/docfeedback/170642

SMARTBoard® 6000 series

interactive flat panels

ADMINISTRATOR’S GUIDE

FOR MODELS SPNL-6055 AND SPNL-6065

smarttech.com/kb/170642

Product registration

If you register your SMART product, we’ll notify you of new features and software upgrades.

Keep the following information available in case you need to contact SMARTSupport.

Serial number:

Date of purchase:

Licenses

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

Trademark notice

SMARTBoard, SMARTInk, SMARTNotebook, DViT, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of

SMARTTechnologiesULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners.

or translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to

change without notice and does not represent a commitment on the part of SMART.

This product and/or use thereof covered by one or more of the following U.S. patents.

www.smarttech.com/patents

01/2015

i smarttech.com/kb/170642

Important information

WARNING

lFailure to follow the installation instructions shipped with your SMART product could result in

personal injury and product damage which may not be covered by your warranty.

lDo not open or disassemble the SMART product. You risk electrical shock from the high

voltage inside the casing. Opening the casing also voids your warranty.

lDo not stand (or allow children to stand) on a chair to touch the surface of your SMART

product. Rather, mount the product at the appropriate height.

lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or

moisture.

lIf your SMART product requires replacement parts, make sure the service technician uses

replacement parts specified by SMARTTechnologies or parts with the same characteristics

as the original.

lEnsure that any cables extending across the floor to your SMART product are properly

bundled and marked to avoid a trip hazard.

lDo not insert objects inside the cabinet ventilation holes, because they could touch

dangerous voltage points and cause electric shock, fire or product damage which may not

be covered by your warranty.

lDo not place any heavy objects on the power cable. Damage to the cable could cause

shock, fire or product damage which may not be covered by your warranty.

lUseonly extension cords and outlets into which this product’s polarized plug can be fully

inserted.

lUse the power cable provided with this product. If a power cable is not supplied with this

product, please contact your supplier. Use only power cables that match the AC voltage of

the power outlet and that comply with your country’s safety standards.

lIf the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass

fragments with care when disposing of them.

lDo not move or mount the interactive flat panel by connecting rope or wire to its handles.

Because the interactive flat panel is heavy, rope, wire or handle failure could lead to

personal injury.

IMPORTANT INFORMATION

ii smarttech.com/kb/170642

lUse only VESA®-approved mounting hardware.

lDisconnect all power cables for your interactive flat panel from the wall outlet and seek

assistance from qualified service personnel when any of the following occurs:

oThe power cable or plug is damaged

oLiquid is spilled into the interactive flat panel

oObjects fall into the interactive flat panel

oThe interactive flat panel is dropped

oStructural damage such as cracking occurs

oThe interactive flat panel behaves unexpectedly when you follow operating

instructions

CAUTION

lBefore you clean your SMART product, shut down or disconnect the computer. Otherwise,

you may scramble the desktop icons or inadvertently activate applications when you wipe

the screen.

lAvoid setting up and using the SMART product in an area with excessive levels of dust,

humidity and smoke.

lMake sure an electrical socket is near your SMART product and remains easily accessible

during use.

lThe external power supply needs to meet the Limited Power Source (LPS) requirements of

CSA/UL/IEC/EN 60950-1, when required.

lThis SMART product should be used only with European TN and TT power distribution

systems.

It is not suitable for older, IT-type power distribution systems found in some European

countries. “This system (IT-type) is widely used isolated from earth, in some installations in

France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral

not distributed, at 230V line-to-line.” (IEC 60950:1999)

Contact qualified personnel if you’re uncertain of the type of power system available where

you’re installing your SMART product.

lYou must connect the USB cable that came with your interactive flat panel to a computer

that has a USB compliant interface and that bears the USB logo. In addition, the USB source

computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or

UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage to the

interactive flat panel.

IMPORTANT INFORMATION

iii smarttech.com/kb/170642

IMPORTANT

lThe following are the power requirements for your interactive flat panel:

Model Power requirements

SPNL-6055 90V to 240V AC, 50Hz to 60 Hz, 122 W

SPNL-6065 100V to 240V AC, 50 Hz to 60 Hz, 190 W

lFor additional requirements and other information, refer to your interactive flat panel’s

specifications (see

Resources for decision makers

on page7).

v smarttech.com/kb/170642

Contents

Important information i

Chapter 1: Welcome 1

About this guide 1

About your interactive flat panel 2

About SMART software 6

Resources for administrators 6

Resources for others 7

Chapter 2: Mounting your interactive flatpanel 9

Before mounting your interactive flat panel 9

Choosing a location 10

Choosing a height 11

Chapter 3: Connecting power and devices 13

Connector panel 13

Connecting power 14

Connecting the roomcomputer 14

Connecting external speakers 15

Chapter 4: Setting up your interactive flatpanel and the roomcomputer 17

Turning on your interactive flat panel and the room computer for the first time 17

Installing SMART software 18

Running the connection wizard 19

Chapter 5: Maintaining your interactiveflatpanel 21

Resetting your interactiveflatpanel 21

Maintaining your interactive flat panel software and firmware 22

Maintaining your interactive flat panel hardware 25

Removing and transporting your interactiveflatpanel 27

Chapter 6: Troubleshooting 29

Locating the interactive flat panel serial number 29

Resolving common issues using the indicator light 29

Resolving image issues 30

Resolving touch issues 30

Resolving connected computer issues 31

Using the SMARTConnectionWizard 32

Using SMARTBoard Diagnostics 33

CONTENTS

vi smarttech.com/kb/170642

Appendix A: Using the on-screen display menu 35

Changing settings in the on-screen display menu 35

On-screen display menu options 36

Appendix B: Remotely managing your interactiveflatpanel 39

Connecting and configuring a roomcontrolsystem 39

Power modes 41

Room control system programming commands and responses 41

Commands 43

Appendix C: Hardware environmental compliance 49

Waste Electrical and Electronic Equipment (WEEE) 49

More information 49

Index 51

Chapter 1

1 smarttech.com/kb/170642

Chapter 1: Welcome

About this guide 1

About your interactive flat panel 2

Models 2

Features 2

Components 3

Screen 3

Cameras and reflective tape channel 4

Front control panel 4

Pens with erasers 5

Speakers 5

About SMART software 6

Resources for administrators 6

Training 6

Support center and knowledge base 6

Resources for others 7

Resources for decision makers 7

Resources for installers 7

Resources for users 7

This chapter introduces you to your SMARTBoard® interactive flat panel and this guide.

About this guide

This guide explains how to set up and maintain your interactive flat panel. It includes the following

information:

lHow to mount your interactive flat panel

lHow to connect power and devices

lHow to set up your interactive flat panel

lHow to maintain your interactive flat panel for years of use

lHow to troubleshoot issues with your interactive flat panel

CHAPTER 1

WELCOME

2 smarttech.com/kb/170642

In addition, this guide includes information on your interactive flat panel’s on-screen display menu

and remote management support.

This guide is intended for individuals who are responsible for installing and maintaining interactive

flat panels in their organizations. Other documentation and resources are available for individuals

who use interactive flat panels.

About your interactive flat panel

Your SMARTBoard® interactive flat panel features SMART’s proprietary DViT®

(DigitalVisionTouch) technology on an LCD screen with e-LED backlight.

Models

The SMARTBoard 6000 series interactive flat panels consists of two models:

lSMARTBoard 6055 interactive flat panel

lSMARTBoard 6065 interactive flat panel

Differences between these models are noted in this guide.

Features

Your interactive flat panel includes the following features:

Feature Description

Touch support You can do everything on your interactive flat panel that you can

do at your computer—open and close applications, meet with

others, create new documents or edit existing ones, visit websites,

play and manipulate videos, and so on—by touching the interactive

flat panel’s surface.

You can use an array of gestures within applications, including

panning, scaling, rotating and zooming in and out.

The interactive flat panel’s support for at least four simultaneous

touches enables you and other users to interact with objects on the

screen at the same time.

Writing and drawing

support

You can write over any application in digital ink using one of the

supplied pens, and then erase the digital ink using the eraser on the

pen or your palm.

You and another writer can write or draw digital ink on the screen at

the same time. The Pen ID feature enables you to assign different

ink appearances to each pen.

Audio support Your interactive flat panel includes integrated speakers for

presenting audio from connected input sources.

Altri manuali per 6000 series

Indice

Altri manuali SMART Board Lavagna interattiva

SMART Board

SMART Board Board 600i6 Manuale utente

SMART Board

SMART Board Board E70 Manuale utente

SMART Board

SMART Board 690 Manuale utente

SMART Board

SMART Board Board 2000i Manuale utente

SMART Board

SMART Board 685ix Manuale utente

SMART Board

SMART Board 800ixe-MP Manuale utente

SMART Board

SMART Board 480iv2 Manuale utente

SMART Board

SMART Board Board 800 series Manuale utente

SMART Board

SMART Board 3000i Manuale utente

SMART Board

SMART Board 885ix-SMP Manuale utente

SMART Board

SMART Board 800i6 Manuale utente

SMART Board

SMART Board SBID 8055i Manuale utente

SMART Board

SMART Board Board E70 Manuale utente

SMART Board

SMART Board 680 Manuale utente

SMART Board

SMART Board SBM685ix2 Manuale utente

SMART Board

SMART Board M685ix2 Manuale utente

SMART Board

SMART Board 880-SMP Manuale utente

SMART Board

SMART Board 600i4 Manuale utente

SMART Board

SMART Board 880i5-SMP Manuale utente

SMART Board

SMART Board Board 600i6 Manuale utente

SMART Board

SMART Board SBID8055i-G5-SMP Manuale di servizio

SMART Board

SMART Board M685ix2 Manuale utente

SMART Board

SMART Board 7000 series Manuale utente

SMART Board

SMART Board Board X800 Series Manuale utente

Manuali Lavagna interattiva popolari di altre marche

SMART

SMART KAPP42 Manuale utente

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Manuale utente

Buhl

Buhl LyteBoard Manuale utente

SMART

SMART SBX880 Manuale utente

Legamaster

Legamaster e-SCREEN ETX Manuale utente

Seneca

Seneca eno Manuale utente

BenQ

BenQ RP840G Manuale utente

SMART

SMART Sympodium IC-150 Manuale utente

Olivetti

Olivetti OLIBOARD Manuale utente

Turning Technologies

Turning Technologies MOBIVIEW Manuale utente

Panasonic

Panasonic UB-5335 Manuale utente

Dukane

Dukane ITP84 Manuale utente

Bretford

Bretford EDUIMS Guida alla configurazione

Panasonic

Panasonic Panaboard UB-5315 Manuale utente

Plus

Plus M-11S Manuale utente

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Manuale utente

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Manuale utente

AVer

AVer CP series Manuale utente