SMC Networks GS501 Manuale utente

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of

patents or other rights of third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to

change specifications at any time without notice.

SMC Networks, Inc.

Trademarks:

SMC is a registered trademark; and EZ Switch is a trademark of SMC Networks, Inc. Other

product and company names are trademarks or registered trademarks of their respective

holders.

LIMITED WARRANTY

Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be

free from defects in workmanship and materials, under normal use and service, for the

applicable warranty term. All SMC products carry a standard 90-day limited warranty from

the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion,

repair or replace any product not operating as warranted with a similar or functionally

equivalent product, during the applicable warranty term. SMC will endeavor to repair or

replace any product returned under warranty within 30 days of receipt of the product.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by

registering new products within 30 days of purchase from SMC or its Authorized Reseller.

Registration can be accomplished via the enclosed product registration card or online via the

SMC Web site. Failure to register will not affect the standard limited warranty. The Limited

Lifetime warranty covers a product during the Life of that Product, which is defined as the

period of time during which the product is an “Active” SMC product. A product is

considered to be “Active” while it is listed on the current SMC price list. As new

technologies emerge, older technologies become obsolete and SMC will, at its discretion,

replace an older product in its product line with one that incorporates these newer

technologies. At that point, the obsolete product is discontinued and is no longer an

“Active” SMC product. A list of discontinued products with their respective dates of

discontinuance can be found at:

http://www.smc.com/index.cfm?action=customer_service_warranty.

All products that are replaced become the property of SMC. Replacement products may be

either new or reconditioned. Any replaced or repaired product carries either a 30-day limited

warranty or the remainder of the initial warranty, whichever is longer. SMC is not

responsible for any custom software or firmware, configuration information, or memory

data of Customer contained in, stored on, or integrated with any products returned to SMC

pursuant to any warranty. Products returned to SMC should have any customer-installed

accessory or add-on components, such as expansion modules, removed prior to returning

the product for replacement. SMC is not responsible for these items if they are returned

with the product.

Customers must contact SMC for a Return Material Authorization number prior to

returning any product to SMC. Proof of purchase may be required. Any product returned to

SMC without a valid Return Material Authorization (RMA) number clearly marked on the

outside of the package will be returned to customer at customer’s expense. For warranty

claims within North America, please call our toll-free customer support number at (800)

762-4968. Customers are responsible for all shipping charges from their facility to SMC.

SMC is responsible for return shipping charges from SMC to customer.

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, CUSTOMER.S SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC.S OPTION. THE

FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN

LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,

EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,

INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR

AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE

UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE

THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS

CAUSED BY CUSTOMER.S OR ANY THIRD PERSON.S MISUSE, NEGLECT,

IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO

REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED

USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT

OR TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR

INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE

DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS,

OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH

THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE,

OR INTERRUPTION OF ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED

RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES

OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS

MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS

WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the active

SMC price list. Under the limited lifetime warranty, internal and external power supplies,

fans, and cables are covered by a standard one-year warranty from date of purchase.

SMC Networks, Inc.

Compliances

Federal Communication Commission Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to meet FCC

emission limits. SMC is not responsible for any radio or television interference caused by

using other than recommended cables and connectors or by unauthorized changes or

modifications to this equipment. Unauthorized changes or modifications could void the

user's authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

EC Declaration of Conformity

SMC contact for these products in Europe is:

SMC Networks Spain, S.L.

Edificio Conata II,

Group CTSG

Fructuos Gelabert 6-8 2o2a

08970 Sant Joan Despi, Barcolona,Spain

This information technology equipment complies with the requirements of the Council

Directive 2004/108/EC on the Approximation of the laws of the Member States relating to

Electromagnetic Compatibility and 2006/95/EC for electrical equipment used within certain

voltage limits and the Amendment Directive 2006/95/EC. For the evaluation of the

compliance with these Directives, the following standards were applied:

RFI Emission:

•Limit class A according to EN 55022: 2006(EMC)

•Limit class A for harmonic current emission according toEN 61000-3-

2/2000+A2:2005

•Limitation of voltage fluctuation and flicker in low-voltage supply system according

to EN 61000-3-3/1995+A1:2001+A2:2005

Immunity:

•Product family standard according to EN 55024:1998+A1:2001+A2:2003

•Electrostatic Discharge according to EN 61000-4-2: 2001 ED.1.2

(Contact Discharge: ±4 kV, Air Discharge: ±8 kV)

•Radio-frequency electromagnetic field according to EN 61000-4-3: 2006 ED.3.0

(80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m)

•Electrical fast transient/burst according to EN 61000-4-4: 2004 ED.2.0 (AC/DC

power supply: ±1 kV, Data/Signal lines: ±0.5 kV)

•Surge immunity test according to EN 61000-4-5: 2005 ED.2.0

(AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV)

•Immunity to conducted disturbances, Induced by radio-frequency fields:

EN 61000-4-6: 2006 ED.2.2 (0.15 - 80 MHz with 1 kHz AM 80% Modulation: 3

V/m)

•Power frequency magnetic field immunity test according to

EN 61000-4-8: 2001 ED.1.1 (1 A/m at frequency 50 Hz)

•Voltage dips, short interruptions and voltage variations immunity test according to

EN 61000-4-11: 2004 ED.2.0 (>95% Reduction @10 ms, 30% Reduction @500 ms,

>95% Reduction @5000 ms)

LVD:

•EN 60950-1:2006

FCC Certifications

This Equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received; including interference that may

cause undesired operation.

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic

compatibility, EN 55022 class A for ITE, the essential protection requirement of

Council Directive 2004/108/EC on the approximation of the laws of the Member

States relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible

that information in this document is not up-to-date. Please check with your local

distributors for the latest information. No part of this document can be copied or

reproduced in any form without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

Introduction

SMCGS501/SMCGS801 is a powerful, high-performance Gigabit Ethernet switch,

with 5/8 ports capable of 10/100/1000 Mbps auto-negotiation operation (NWay),

which means the switch could automatically negotiate with the connected partners on

the network speed and duplex mode. It is ideal for micro-segmenting large networks

into smaller, connected subnets for improved performance, enabling the bandwidth

demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps

auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps

network. Compared to the shared 10Mbps or 100Mbps networks, the switch delivers

a dedicated 10/100/1000Mbps connection to every attached client without

bandwidth congestion issue. This switch also supports auto MDI/ MDI-X function.

Each port could be used to connect to another switch or hub without crossover RJ-

45 cable.

Store-and-forward switching mode promises the low latency plus eliminates all the

network errors, including runt and CRC error packets. To work under full-duplex

mode, transmission and reception of the frames can occur simultaneously without

causing collisions as well as double the network bandwidth. Moreover, Pre-IEEE

802.3az Energy Efficient Ethernet is supported to save power consumption

The switch is plug and play without any software to configure and also fully

compliant with all kinds of network protocols.

Before you start to install the switch, check the following contents in this package：

1. One 5/8–Port Gigabit Ethernet switch

2. One external power adapter

3. Four rubber feet

4. User’s Manual

5. Warranty Card

6. Quick Install Guide

Key Features

Complies with 10BASE-T specifications of the IEEE802.3 standard

Complies with 100BASE-TX specifications of the IEEE802.3u standard

Complies with 1000BASE-T specifications of the IEEE802.3ab standard

5/8 - 10/100/1000Mbps RJ-45 ports

Supports MDI/MDI-X auto crossover

Supports full and half duplex operation on all ports

Supports back-pressure (half duplex) and full duplex flow control (IEEE 802.3x)

Wire-speed packet filtering and forwarding rate

Store-and-forward architecture filters fragment & CRC error packets

Supports extensive LED indicators for network diagnostics

Supports IEEE 802.1p QoS

Supports Pre-IEEE 802.3az

LEDs Definition

The switch contains one power LED for the device, Link/Act LED for each port

that shows the activities and information of the ports.

Please refer to the following table for LEDs definition:

LED Status Operation

Steady Green The switch is powered on

Power Off The switch is powered off

Steady Green Valid port connection

Blinking Green Valid port connection and there is data

transmitting/ receiving

Link/ ACT

Off Port disconnected

Altri manuali per GS501

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SMC Networks Router di rete

SMC Networks

SMC Networks SMCGS501P Manuale utente

SMC Networks

SMC Networks 8648T FICHE Manuale utente

SMC Networks

SMC Networks SMC Barricade SMCBR24Q Manuale utente

SMC Networks

SMC Networks 7824M/VSW Manuale utente

SMC Networks

SMC Networks 24/16 Manuale utente

SMC Networks

SMC Networks 7904BRA3 - annexe 1 Manuale utente

SMC Networks

SMC Networks Barricade SMC7901BRA4 Manuale utente

SMC Networks

SMC Networks EZ Switch SMCGS1610 Manuale utente

SMC Networks

SMC Networks SMCGS10C-Smart Manuale utente

SMC Networks

SMC Networks TigerAccess SMC7824M/VSW Guida all'installazione

SMC Networks

SMC Networks 7004VBR Manuale utente

SMC Networks

SMC Networks 7901BRA2 - annexe 2 Manuale utente

SMC Networks

SMC Networks TigerSwitch 100 SMC6924VF Manuale di programmazione

SMC Networks

SMC Networks GS1601 Manuale utente

SMC Networks

SMC Networks 7204BRB Manuale utente

SMC Networks

SMC Networks EZ Switch SMCGS1601P Manuale utente

SMC Networks

SMC Networks ADSL2 Barricade SMC7904BRA3 Manuale utente

SMC Networks

SMC Networks Barricade ADSL2/2+ Modem Router SMC7901BRA2 Manuale utente

SMC Networks

SMC Networks Barricade SMC7204BRA Manuale utente

SMC Networks

SMC Networks 7904BRB3 FICHE Istruzioni operative e di sicurezza

SMC Networks

SMC Networks 7004VBR Manuale utente

SMC Networks

SMC Networks Barricade Plus SMC7004FW Manuale utente

SMC Networks

SMC Networks EZ Connect SMC7003ADSL Manuale utente

SMC Networks

SMC Networks SMC8612T2 Manuale di programmazione

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza