SMC Networks SMC6516TF Manuale utente

User Guide

TigerSwitch 16

Intelligent bandwidth acceleration for workgroups

Ethernet and Fast Ethernet Workgroup Switches

◆Three models, each with 16 10BASE-T ports plus:

◆Two 100BASE-TX ports

◆Two 100BASE-FX ports

◆One 100BASE-TX port and one 100BASE-FX port

◆Manageable in-band via SNMP, RMON and Telnet

USER GUIDE

FOR SMC’S

TIGERSWITCH 16

FAMILY

July 1997

Pub. # 900.185 Rev. A

Standard Microsystems Corporation

80 Arkay Drive

Hauppauge, New York 11788

Information furnished by Standard Microsystems Corporation

(SMC) is believed to be accurate and reliable. However, no

responsibility is assumed by SMC for its use, nor for any

infringements of patents or other rights of third parties which

may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of SMC. SMC

reserves the right to change specifications at any time without

notice.

Standard Microsystems Corporation

Hauppauge, New York.

Trademarks:

SMC and Standard Microsystems are registered trademarks; and EliteView, EtherEZ,

EtherPower, EZ Hub, TigerStack and TigerSwitch are trademarks of Standard Microsystems

Corporation. Other product and company names are trademarks or registered trademarks

of their respective holders.

Limited Warranty

HARDWARE: Standard Microsystems Corporation (“SMC”) warrants these

TigerSwitch 16 units to be free from defects in workmanship and materials,

under normal use and service, for the following length of time from the date of

purchase from SMC or its Authorized Reseller:

TigerSwitch 16 Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Three Years

If a product does not operate as warranted during the applicable warranty

period, SMC shall, at its option and expense, repair the defective product or

part, deliver to Customer an equivalent product or part to replace the defective

item, or refund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of SMC. Replacement

products may be new or reconditioned. Any replaced or repaired product or

part has a ninety (90) day warranty or the remainder of the initial warranty

period, whichever is longer.

SMC shall not be responsible for any custom software or firmware, configura-

tion information, or memory data of Customer contained in, stored on, or

integrated with any products returned to SMC pursuant to any warranty.

SOFTWARE: SMC warrants that the software programs licensed from it will

perform in substantial conformance to the program specifications for a period

of ninety (90) days from the date of purchase from SMC or its Authorized

Reseller. SMC warrants the magnetic media containing software against failure

during the warranty period. No updates are provided. SMC’s sole obligation

hereunder shall be (at SMC’s discretion) to refund the purchase price paid by

Customer for any defective software products or to replace any defective media

with software which substantially conforms to SMC’s applicable published spec-

ifications. Customer assumes responsibility for the selection of the appropriate

applications program and associated reference materials. SMC makes no war-

ranty that its software products will work in combination with any hardware or

applications software products provided by third parties, that the operation of

the software products will be uninterrupted or error free, or that all defects in

the software products will be corrected. For any third party products listed in

the SMC software product documentation or specifications as being compatible,

SMC will make reasonable efforts to prove compatibility, except where the

non-compatibility is caused by a “bug” or defect in the third party’s product.

STANDARD WARRANTY SERVICE: Standard warranty service for hardware

products may be obtained by delivering the defective product, accompanied

by a copy of the dated proof of purchase, to SMC’s Service Center or to an

Authorized SMC Service Center during the applicable warranty period. Standard

warranty service for software products may be obtained by telephoning SMC’s

Service Center or an Authorized SMC Service Center, within the warranty

period. Products returned to SMC’s Service Center must be pre-authorized by

SMC with a Return Material Authorization (RMA) number marked on the out-

side of the package, and sent prepaid, insured, and packaged appropriately for

safe shipment. The repaired or replaced item will be shipped to Customer, at

SMC’s expense, not later than thirty (30) days after receipt by SMC.

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR,

REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID, AT SMC’S

OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE

AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS

OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR

OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER

ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY

OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAIN-

TENANCE OR USE OF ITS PRODUCTS.

SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND

EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES

NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S

MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED

ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF

THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER

HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT

OR TORT (INCLUDING NEGLIGENCE) SHALL SMC BE LIABLE FOR INCIDEN-

TAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF

ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER

FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE,

INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTER-

RUPTION OF ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTHING

HEREIN SHALL HAVE THE EFFECT OF LIMITING OR EXCLUDING SMC’S

LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY NEGLIGENCE.

Some states do not allow the exclusion of implied warranties or the limitation

of incidental or consequential damages for consumer products, so the above

limitations and exclusions may not apply to you. This warranty gives you spe-

cific legal rights which may vary from state to state. Nothing in this warranty

shall be taken to affect your statutory rights.

Standard Microsystems Corporation

80 Arkay Drive

Hauppauge, NY 11788

516-273-3100

LIMITED WARRANTY

Compliances.......................................................... v

1 Quick Start...................................................... 1-1

Introduction ......................................................................... 1-2

Connecting the Switch......................................................... 1-3

Configuring the Switch for SNMP and Telnet

Management .................................................................... 1-5

2 About the Switches ........................................ 2-1

Overview.............................................................................. 2-3

Features and Benefits.......................................................... 2-12

Switch Architecture.............................................................. 2-13

Switch Operation................................................................. 2-15

Management Options .......................................................... 2-16

3 Planning......................................................... 3-1

Benefits of Switching........................................................... 3-2

Segmenting the Network..................................................... 3-4

Full-Duplex Operation ........................................................ 3-5

Sample Applications............................................................ 3-6

4 Installing ........................................................ 4-1

Selecting a Site..................................................................... 4-2

Equipment Checklist............................................................ 4-3

Mounting.............................................................................. 4-4

Connecting to the Console Port.......................................... 4-6

Connecting to a Power Source ........................................... 4-7

Diagnostic Self-Tests............................................................ 4-8

Making Network Connections ............................................ 4-9

Default Settings.................................................................... 4-13

TABLE OF CONTENTS

5 Configuring and Monitoring ........................ 5-1

The Console Interface ......................................................... 5-3

Typical Configuration Operations ...................................... 5-25

Typical Monitoring Operations........................................... 5-32

Using Telnet......................................................................... 5-34

Using SLIP............................................................................ 5-35

6 Managing Via SNMP and RMON.................... 6-1

SNMP Protocol..................................................................... 6-2

Using RMON........................................................................ 6-3

MIB Objects ......................................................................... 6-3

A Cables ............................................................. A-1

Specifications ....................................................................... A-2

10BASE-T/100BASE-TX Pin Assignments........................... A-3

Serial Console Port Pin Assignments.................................. A-5

B Specifications................................................. B-1

Specifications ....................................................................... B-2

C Sample Configuration ................................... C-1

Introduction ......................................................................... C-2

Windows Terminal............................................................... C-3

D Troubleshooting ............................................ D-1

Troubleshooting Chart......................................................... D-2

TABLE OF CONTENTS

List of Figures

Figure 1-1. Main Menu....................................................... 1-4

Figure 1-2. Switch Configuration Menu ............................ 1-5

Figure 1-3. IP Configuration Menu.................................... 1-6

Figure 1-4. SNMP Configuration Menu.............................. 1-7

Figure 2-1. TigerSwitch 16 Model SMC6516TT with

two 100BASE-TX Ports..................................................... 2-3

Figure 2-2. TigerSwitch 16 Model SMC6516FF with

two 100BASE-FX Ports..................................................... 2-3

Figure 2-3. TigerSwitch 16 Model SMC6516TF with

one 100BASE-TX Port and one 100BASE-FX Port.......... 2-3

Figure 2-4. 10BASE-T Ports................................................ 2-5

Figure 2-5. SMC6516FF with 100BASE-FX Ports............... 2-6

Figure 2-6. RJ-45 Integrated LEDs...................................... 2-7

Figure 2-7. Vertical LED Array and Port Select Button..... 2-8

Figure 2-8. Console Port and Reset Button....................... 2-9

Figure 2-9. Power Supply Receptacles.............................. 2-10

Figure 2-10. Power Supply LEDs........................................ 2-10

Figure 3-1. Single-Segment LAN........................................ 3-6

Figure 3-2. Microsegmented LAN...................................... 3-7

Figure 3-3. Switched LAN .................................................. 3-8

Figure 3-4. Sample Application with Model SMC6516TT. 3-9

Figure 3-5. Sample Application with Model SMC6516TF. 3-10

Figure 3-6. Sample Application with Model SMC6516FF. 3-11

Figure 4-1. Attaching the Brackets .................................... 4-4

Figure 4-2. Installing the Switch in a Rack........................ 4-5

Figure 4-3. Attaching the Adhesive Feet........................... 4-5

Figure 4-4. Console Port .................................................... 4-6

Figure 4-5. Power Receptacles........................................... 4-7

Figure 4-6. Diagnostics Display......................................... 4-8

iii

TABLE OF CONTENTS

Figure 4-7. Connecting Fiber Cable................................... 4-12

Figure 5-1. Main Menu....................................................... 5-4

Figure 5-2. Switch Configuration Menu ............................ 5-5

Figure 5-3. Configuration Display Screen ......................... 5-7

Figure 5-4. IP Configuration Menu.................................... 5-9

Figure 5-5. SNMP Configuration Menu.............................. 5-11

Figure 5-6. Spanning Tree Configuration Menu ............... 5-12

Figure 5-7. Address Aging Configuration Menu ............... 5-13

Figure 5-8. Port Mirroring Configuration Menu................ 5-14

Figure 5-9. Port Configuration Menu................................. 5-15

Figure 5-10 Port Summary Display Screen........................ 5-16

Figure 5-11. Port Summary Configuration Menu.............. 5-17

Figure 5-12. Port [x] Configuration Menu.......................... 5-18

Figure 5-13. Statistics Menu ............................................... 5-19

Figure 5-14. Utilities Menu................................................. 5-20

Figure 5-15. Console Configuration Menu........................ 5-22

Figure 5-16. Boot Menu ..................................................... 5-23

Figure 5-17. Telnet Menu................................................... 5-24

Figure 5-18. TFTP Loader Menu........................................ 5-30

Figure 5-19. IP Configuration Menu.................................. 5-35

Figure A-1. RJ-45 Connector Pin Numbers........................ A-3

TABLE OF CONTENTS

FCC A

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

interference to radio communications. It has been tested and found to comply

with the limits for a Class A computing device pursuant to Subpart B of Part 15

of FCC Rules, which are designed to provide reasonable protection against such

interference when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in which case the

user, at his own expense, will be required to take whatever measures may be

required to correct the interference.

Canada Department of Communications - Class A

This digital apparatus does not exceed the Class A limits for radio noise emis-

sions from digital apparatus as set out in the interference-causing equipment

standard entitled "Digital Apparatus", ICES-003 of the Department of

Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applica-

bles aux appareils numériques de Classe A prescrites dans la norme sur le

matériel brouilleur : "Appareils Numériques", NMB-003 édictée par le ministère

des Communications.

EC Conformity

This information technology product was found to comply with EC General

Directives 89/336/EEC and 73/23/EEC. An EC Declaration of Conformity was

issued for this product by:

Standard Microsystems (Europe) Limited

1st Floor, Pyramid House, Easthampstead Road

Bracknell, Berkshire RG12 1NS, United Kingdom

Japan VCCI Class 1

Australia AS/NZS 3548 (1995)

SMC contact for products in Australia is:

SMC Australia Pty. Ltd., ACN 069 351 613

LVL 66 MLC Center

Martin Place

Sydney NSW 2000

Phone: 61-2-9238-2206

Fax: 61-2-9238-2220

COMPLIANCES

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SMC Networks Interruttore

SMC Networks

SMC Networks TigerSwitch SMC6912M Manuale utente

SMC Networks

SMC Networks TigerStack 100 1000BASE-X Manuale di programmazione

SMC Networks

SMC Networks TigerSwitch SMC6948L2 Manuale utente

SMC Networks

SMC Networks D-F6# Series Manuale utente

SMC Networks

SMC Networks ISE70 AB Series Manuale utente

SMC Networks

SMC Networks TigerStack II SMC8848M Manuale di programmazione

SMC Networks

SMC Networks ZSE30A series Manuale utente

SMC Networks

SMC Networks ZSE3 Series Manuale utente

SMC Networks

SMC Networks SMC6824M Manuale utente

SMC Networks

SMC Networks ZSE2 Series Manuale utente

SMC Networks

SMC Networks D-M7BA Series Manuale utente

SMC Networks

SMC Networks 6900FSC FICHE Manuale utente

SMC Networks

SMC Networks GS1601 Istruzioni operative e di sicurezza

SMC Networks

SMC Networks ISE40A Manuale utente

SMC Networks

SMC Networks 6724L2 Manuale utente

SMC Networks

SMC Networks SMCGS10P-Smart Manuale di programmazione

SMC Networks

SMC Networks EZ Switch SMC-EZ1016DT Manuale del proprietario

SMC Networks

SMC Networks 8505T - FICHE TECHNIQUE Guida all'installazione

SMC Networks

SMC Networks D-M9NAV Manuale di istruzioni

SMC Networks

SMC Networks SMC6724L3 Manuale di programmazione

SMC Networks

SMC Networks D-M9N Manuale

SMC Networks

SMC Networks 6824MPE INT - annexe 1 Manuale utente

SMC Networks

SMC Networks TigerSwitch SMC6724L3 Manuale utente

SMC Networks

SMC Networks TigerStack SMC6924MT Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente