SOMFY Pergola Manuale di istruzioni
Copyright © Somfy SAS 7/2019 P-0036
Pergola Tilt RTS Control Box
Connection Quick Start Guide
Switch 1
ON Drive with coder sensor
OFF Drive without coder sensor
Switch 2
(only if switch 1 is set to ON)
ON Activates synchronization S1 and S2
OFF Deactivates synchronization S1 and S2
Switch 3
ON 5.5 A max. per output
OFF 3 A max. per output
Switch 4
ON Activates the temperature sensor
OFF Deactivates the temperature sensor
Switch 5
ON Closing in the event of wind
OFF Opening in the event of wind
Power Supply Input
A
-24 Vdc power supply input (SELV)
B
+
Drive output 1
Blue
C
-24 Vdc - 3A/5.5A drive: Maximum
current according to switch 3
Brown
D
+
Drive output 2
Blue
E
-24 Vdc - 3A/5.5A drive: Maximum
current according to switch 3
Brown
F
+
Rain Sensor
O
Contact Dry contact input
P
Common
Q
-Power supply output:
24 Vdc/- 300 mA
R
+
DESCRIPTION & CONNECTIONS
ST
External
antenna
PROG
button.
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
O PQR
Output
Power
supply
Rain
sensor
BA
Drive
output S2
Drive
output S1
Drive without
encoder
FEDC
Power
supply
input
External antenna
S
Signal Conductor
T
GND Shielding braid
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
Status
The LED flashes every 4 seconds: Circuit board waiting.
The LED flashes rapidly: Command in progress.
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
Fault
The red LED light remains illuminated for 5 seconds: Current consumption threshold has
been exceeded or circuit board has heated up too much during an output command.
The red LED flashes: drive synchronisation fault.
The orange LED remains illuminated for several seconds: Backing-up the memory.
The orange LED flashes rapidly: Movement of a drive not permitted by a sensor action.
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
Wind (1)
The orange LED remains illuminated: Wind
threshold has been exceeded.
The orange LED flashes rapidly: protection still
in progress for 15 minutes aer the threshold
last being exceeded.
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
Temperature (1) (2)
The orange LED remains illuminated: the ice threshold has been
exceeded.
The orange LED flashes rapidly: protection still in progress for 15
minutes aer the latest threshold is exceeded.
DESCRIPTIONS OF CIRCUIT BOARD INDICATOR LIGHTS
1
2
34
S
T
Rain (1) (2)
The orange LED remains illuminated: The rain threshold has been
exceeded.
The orange LED flashes rapidly: protection still in progress for 15
minutes aer the threshold last being exceeded.
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
BEFORE YOU BEGIN: Power must be cut before wiring or making any wiring changes
OUTPUT Vdc
S1
+-
OUTPUT Vdc
POWER SUPPLY
+-
OUTPUT Vdc
+-
+-
S2
+-
Status
Fault
Wind
Rain
Temperature
Pergola Tilt RTS Control Box
Programming Quick Reference Guide
OUTPUT Vdc
S1
+
-
OUTPUT Vdc
POWER SUPPLY
+
-
OUTPUT Vdc
+
-
+
-
S2
+
-
Copyright © Somfy SAS 7/2019 P-0036
1. INITIATE PROGRAMMING
OR
2. CHECK THE DIRECTION OF OPERATION
3. SET THE END LIMITS 4. SNOW/ICE POSITION AND VALIDATION
5. PAIRING THE REMOTE CONTROL
Repeat steps from 1.2 through step 4.
1.1 Press & hold the PROG button
on the circuit board until both S1 and
S2 LEDs flash. The motor jogs.
2.1 Press the UP button to confirm the pergola opens.
Briefly press UP and DOWN at the
same time to initiate the end limit
(self-learning) process.
Do not interrupt the movement:
the drive will automatically
search for its end limits.
4.1 Use the UP or DOWN buttons to run the motor to the desired position for
ice/snow.
4.2 Press & hold the MY button until the motor jogs to confirm the settings.
Briefly press the PROGRAMMING
button on the back of the
transmitter.
The motor jogs.
NOTE: On a multi-channel RTS control,
select a different channel on step 1.3
ADD OR DELETE A CONTROL OR SENSOR
The procedure to delete a RTS control or sensor is the same.
The direction
of rotation is
correct
If the pergola closes, the direction of rotation is incorrect.
2.2 Press & hold MY button until the motor jogs.
The rotation direction has been modified.
1.3 On a multi-channel RTS
control, select the desired channel.
1.4 Press briefly UP and DOWN
simultaneously. The motor jogs.
1.2 Briefly press the PROG button to select motor S1
or S2 to program. S1 or S2 LED will light to confirm the
motor to be programmed.
6. PROGRAMMING MOTOR 2
a) Press & hold the PROG button on
the back of Control 1 until the pergola
jogs.
b) Briefly press the PROG button on
the back of Control 2 until the pergola
jogs.
CONTROL 1: Previously
programmed control
CONTROL 2: Second control to
be added or deleted.
BEFORE YOU BEGIN:
Check the motor power plug to ensure it is fully inserted and the retainer caps screws are in flush.
Clearing the control
box’s memory
completely:
RESETTING THE CONTROL
BOX TO FACTORY MODE
OUTPUT Vdc
S1
+
-
OUTPUT Vdc
POWER SUPPLY
+
-
OUTPUT Vdc
+
-
+
-
S2
+
-
> 7 s.
Press the PROG button on the circuit
board for more than 7 seconds until all
the indicator lights on the circuit board
light up.
Indice
Altri manuali SOMFY Unità di controllo
SOMFY
SOMFY SMOOVE LIGHTING io Manuale utente
SOMFY
SOMFY Control Box 3S io Manuale utente
SOMFY
SOMFY EOLIS Inteo Wind Control Manuale utente
SOMFY
SOMFY CD 1 x 4 P6 Manuale utente
SOMFY
SOMFY CONTROL BOX 3S RTS Manuale utente
SOMFY
SOMFY Ondeis 24 V DC Manuale utente
SOMFY
SOMFY Control Box 3S io Manuale utente
SOMFY
SOMFY MATIC Series Manuale utente
SOMFY
SOMFY Control Box 3S io Manuale utente
SOMFY
SOMFY P.TILT RTS M+L Manuale utente
SOMFY
SOMFY animeo 1860114 Manuale utente
SOMFY
SOMFY CONTROL BOX 3S RTS Manuale utente
SOMFY
SOMFY SLIDYMOOVE Manuale utente
SOMFY
SOMFY Animeo Solo 1860143 Manuale utente
SOMFY
SOMFY QuickCopy Manuale utente
SOMFY
SOMFY animeo LON 1860239 Manuale utente
SOMFY
SOMFY Control Box 3S io Manuale utente
SOMFY
SOMFY CONTROL BOX 3S RTS Manuale utente
SOMFY
SOMFY animeo Manuale utente
SOMFY
SOMFY Pergola Manuale di istruzioni
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
