SOMFY RS485 Setting Tool Manuale utente
Quick Guide RS485 Frame Builder 08/2011 1
RS485 Frame Builder
Quick Guide
Quick Guide RS485 Frame Builder 08/2011 2
1. Objective
• The goal of this tool is to help system integrators, by avoiding to
calculate in hexadecimal, to know which datas to send, to control
Somfy RS485 products.
• No need to connect the PC to an RS485 network.
2. Configuration
• Windows XP
RS485 Frame Builder
Quick Guide RS485 Frame Builder 08/2011 3
RS485 Frame Builder
3. Installation
• Download the application:
RS485FrameBuilder Setup.1.1.1.33722.exe
• Double-click to execute the installation
• Click on ‘I Agree’
• Choose components, then click on ‘Next >’
Quick Guide RS485 Frame Builder 08/2011 4
• Select the destination folder, then click on ‘Install’
• Click on ‘Close’ to finish the installation
RS485 Frame Builder
Quick Guide RS485 Frame Builder 08/2011 5
RS485 Frame Builder
4. Use
• Launch the application ‘RS485 Frame Builder’
• A black window appears ; click on ‘I Agree’ to continue or on
‘Cancel’ to close
Quick Guide RS485 Frame Builder 08/2011 6
• Select the concerned RS485 Somfy product
• List of managed RS485 products by the software:
• RS485 RTS TRANSMITTER
• RS485 4ILT INTERFACE
• SONESSE 30 RS485 (not launched internationaly)
RS485 Frame Builder
Quick Guide RS485 Frame Builder 08/2011 7
Messages box
Standard messages:
Settings messages:
Control messages:
Status messages:
Product version
Host address (master)
Slave address (=
Node ID of the interface)
Addressing mode
Output Frame = Data to send
! Red text means something is not correct !
RS485 Frame Builder
/ RS485 4ILT Interface
5. RS485 4ILT Interface
Quick Guide RS485 Frame Builder 08/2011 8
RS485 Frame Builder
• Standard messages supported by the RS485 4ILT Interface
5E
4E
70
51
41
40
Message’s
number
Configure and reset network communication statistics
√SET_NETWORK_STAT
Request to send network communication statistics
√GET_NETWORK_STAT
Read software information
√GET_NODE_SW_INFO
Define one entry in the group address table
√SET_GROUP_ADDR
Read one entry of groups table
√GET_GROUP_ADDR
Ask all online nodes to send their NodeID
√GET_NODE_ADDRESS
Message’s descriptionCompatibilityMessage’s name
RS485 Frame Builder
/ RS485 4ILT Interface
• Settings messages supported by the RS485 4ILT Interface
98
91
90
Message’s
number
Send Up Down Stop order to the selected motor output
√SET_SCREEN_POSITION
Erase definition of selected format
√RESET_FORMAT
Store current position of each motor in the selected format
definition
√SET_FORMAT
Message’s descriptionCompatibilityMessage’s name
• Control messages supported by the RS485 4ILT Interface
80
Message’s
number
Change position of all motors following selected format
definition
√
GOTO_FORMAT
Message’s descriptionCompatibilityMessage’s name
• Status messages supported by the RS485 4ILT Interface
88
Message’s
number
Read all information available for the selected motor output √
GET_SCREEN_STATUS
Message’s descriptionCompatibilityMessage’s name
Quick Guide RS485 Frame Builder 08/2011 9
! Red text means something is not correct !
6. RS485 RTS Transmitter
Addressing mode
Product version
Host address (master)
Slave address (=
Node ID of the transmitter)
Output Frame = Data to send
RS485 Frame Builder
/ RS485 RTS Transmitter
Standard messages:
Settings messages:
Control messages:
Status messages:
Messages box
Quick Guide RS485 Frame Builder 08/2011 10
RS485 Frame Builder
• Standard messages supported by the RS485 RTS Transmitter
Read error counter of the stack
√GET_NETWORK_ERROR_STAT4D
55
45
74
4C
5E
4E
51
41
40
Message’s
number
Write label of the node
√SET_NODE_LABEL
Read label of the node
√GET_NODE_LABEL
Read version of the software
√GET_NODE_APP_VERSION
Read serial number of the node
√GET_NODE_SERIAL_NUMBER
Configure and reset network communication
statistics
√SET_NETWORK_STAT
Request to send network communication statistics
√GET_NETWORK_STAT
Define one entry in the group address table
√SET_GROUP_ADDR
Read one entry of groups table
√GET_GROUP_ADDR
Ask all online nodes to send their NodeID
√GET_NODE_ADDRESS
Message’s descriptionCompatibilityMessage’s name
RS485 Frame Builder
/ RS485 RTS Transmitter
• Settings messages supported by the RS485 RTS Transmitter
Set the modes to use√
SET_CHANNEL_MODE90
Set the number of RTS frames the product should
send on a CTRL_TILT order
√
SET_TILT_FRAMECOUNT91
Set the number of RTS frames the product should
send on a CTRL_DIM order
√
SET_DIM_FRAMECOUNT92
Activate Deactivate the sun protection√
SET_SUN_AUTO93
Lock Unlock Dry Contact inputs√
SET_DCT_LOCK94
Validate an addition or a deletion of an RTS
channel’s address
√
SET_CHANNEL97
9A
98
Message’s
number
Record Delete Intermediate Position√
SET_IP
Open the programming mode of a receiver√
SET_OPEN_PROG
Message’s descriptionCompatibilityMessage’s name
Altri manuali per RS485 Setting Tool
3
Altri manuali SOMFY Trasmettitore
SOMFY
SOMFY RS485 Setting Tool Manuale utente
SOMFY
SOMFY XSE Manuale utente
SOMFY
SOMFY RS485 RTS Manuale utente
SOMFY
SOMFY Impresario Chronis io Manuale utente
SOMFY
SOMFY inteo TELIS SOLIRIS RTS Manuale utente
SOMFY
SOMFY Telis 6 Chronis RTS Manuale utente
SOMFY
SOMFY inteo Manuale utente
SOMFY
SOMFY RTS series Manuale utente
SOMFY
SOMFY IZYMO Transmitter io Manuale utente
SOMFY
SOMFY RTS LT-30RT Manuale utente
