SOMFY RTS series Manuale utente
user guide
Instruction booklet for Somfy
automatic controls for awnings
Tested under the most rigorous conditions,
Somfy motors and controls are guaranteed for
5 years from the date of installation.
This booklet contains information on your
automatic awning.
Please take the time to complete your warranty registration
form. This will ensure that you receive comprehensive after
sales services for a period of 5 years and covers the Somfy
motor and controls products used with your awning.
Warranty
year
Table of contents
Types of installation p 4-5
Manual functions p 6-8
Adjusting controls p 9
Resetting the awning p 10-11
Auto/Manual configuration p 12-13
Automatic mode p 14-16
Sensor adjustment p 17
Lighting control p 18
Trouble shooting p 19
The Somfy RTS range of transmitters have a range of
200 metres in open space and 20 metres through two
concrete walls.
Types of installation
individual wireless control
4
Telis Soliris RTS Pure
Soliris sensor RTS
Telis RTS
Pure range
All of these control products are compatible with the Orea and Altus RTS motors
5
group & automatic controls
Centralis RTS
range
Telis RTS
Patio range
Telis RTS
Silver range
Types of installation cont’d
6
Manual functions
Briefly press any of the control buttons to operate the
awning.
Your wireless awning has been programmed so that it
will stop automatically when it reaches the fully open
or closed positions.
normal commands
Motor will stop once the
awning is fully retracted
Motor will stop once the
awning is fully extended
7
It is possible to programme an intermediate position
that can be selected at any time to provide partial
shading.
Move the awning to the required position and press
the stop button. Programme the intermediate position
as follows;
intermediate position
Press the STOP
button for
more than 5
secs
The awning will double shunt
(moves up & down briefly) indicating
that the intermediate position has
been memorised by the motor
Manual functions cont’d
8
Manual functions cont’d
using the intermediate ‘my’ position
Manually : When the awning is stationary, press the
stop button on the transmitter. The awning will move
automatically to the intermediate position.
Automatically : When the Soliris sensor registers bright
daylight it transmits an extend command. The awning
will move to the intermediate position only if the
intermediate position has been programmed.
deleting the intermediate position
Select the intermediate position as described above.
Press the STOP button for more than 5 seconds until
the awning does a double shunt. The intermediate
position has now been deleted.
9
Adjusting controls
add or delete a control
Press the programming button on the back of the existing transmitter
for more than 2 seconds. The awning will double shunt.
Press the program button on the back of the new or existing
transmitter to add or delete the transmitter from the motor’s
memory. The awning will double shunt.
3V
LITHIUM
CR2430
+
3V
LITHIUM
CR2430
+
> 2 seconds
10
Resetting the awning
Do a double power cut as indicated in the diagram:
ATTENTION! If several motors are connected to the same power supply, they will also be reset.
In this case isolate any other motors that don’t require re-programming.
The awning will move for 5 seconds
indicating that the double power
cut has been recorded.The motor is
now in learning mode.
5 Secs
replacing a lost control
Motor
switched on
Power off
for 4 s
Power on
for 8 s
Power off
for 4 s
Power on
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali SOMFY Trasmettitore
SOMFY
SOMFY RS485 RTS Manuale utente
SOMFY
SOMFY inteo Manuale utente
SOMFY
SOMFY inteo TELIS SOLIRIS RTS Manuale utente
SOMFY
SOMFY RTS LT-30RT Manuale utente
SOMFY
SOMFY RS485 Setting Tool Manuale utente
SOMFY
SOMFY XSE Manuale utente
SOMFY
SOMFY Impresario Chronis io Manuale utente
SOMFY
SOMFY IZYMO Transmitter io Manuale utente
SOMFY
SOMFY Telis 6 Chronis RTS Manuale utente
SOMFY
SOMFY RS485 Setting Tool Manuale utente
