Sonelco PCP1231 Manuale utente
DIGITAL ADJUSTMENT CONTROL - PCP1231
1/2 STEREO MUSIC CHANNELS
DESCRIPTION
1+1 W stereo amplified control with digital volume adjustment, possibility
of selecting two music channels, LOUDNESS, SUPERBASS, SCAN and
SLEEP function, output for earphones and input for walkman.
NOTE: The system must be wired up separately from the electricity
mains, according to regulations.
After making the connection, switch the main unit on and make
sure there are two audio sources connected to the main unit
(tuners or another external audio source). If a telecontrol is used
make sure the main unit uses the telecontrol by voltage (see infor-
mation on main unit).Check the position of the MONO/STEREO
switch (10). If both speakers have been installed in that room the
switch will be placed on Stereo (position by defect).
If only one speaker has been installed in that room place the swit-
ch on MONO (M). Apply ON/OFF pushbutton (5) and make sure
the ON LED (6) comes on. Keep the Volume + key (1) pressed
until the music is heard at desired level and let it go. To lower the
music level apply Volume - key (2).
Switch control on: Apply ON/OFF pushbutton (5) and verify that
the “on” LED (6) has come on.
Turn volume up: To increase the sound level of the music apply
Volume + key (1). The “on” led (6) will flash whilst this key is
pressed or until the maximum volume is reached.
Turn volume down: To reduce the sound level of the music apply
Volume – key (2). The “on” led (6) will flash whilst this key is
pressed or until the minimum volume is reached.
Superbass function: The default control comes with the
Loudness option (“on” led (6) on red); if you want greater bass
enhancement, apply volume + (1) and volume – (2) keys at the
same time, thus activating the Superbass function (“on” led (6)
will turn green).
Switch control off: To switch the control off, lightly press the ON/
OFF pushbutton (5) and verify that the “on” LED (6) goes off.
SLEEP function: If you wish to activate the SLEEP function
(timed off) instead of pressing it lightly (which turns it off imme-
diately), keep the key pressed down until the “on” LED starts to
flash, thus indicating the SLEEP activation. The control will go off
automatically after about 30 minutes. If, with the SLEEP function
activated, we press the ON/OFF key again, the control will go off
immediately.
Note: Whilst the SLEEP function is activated, all the other
functions of the control will remain operative.
SCAN function: If the musical signal comes from a SONELCO tuner
and the SCAN line is connected, the station can be selected by applying
the SCAN button (9) (the “on” led (6) will flash whilst the key is pressed
down).
GENERAL CHARACTERISTICS
Electronic ON/OFF switch
Luminous ON/Sb indicator /Two-coloured LED type
Key pressed luminous indication (Vol+, Vol- and SCAN)
100-stage digital volume control with memory of selected position
with main unit in operation.
Integrated audio processor.
Microprocessor-controlled progressive Loudness and Superbass
SCAN function, (remote change of radio station in a SONELCO
tuner)
SLEEP function (the control switches itself off after 30/60 minutes)
Selection of two music channels, with light indicating channel selec-
ted.
Output for stereo earphones, with disconnection of speakers.
Input for outside audio signal (Walkman) for amplification through
speakers, with automatic disconnection of line signal.
Telecontrol by voltage
-
-
-
-
-
-
-
-
-
-
-
-
CONNECTION
OPERATION
Before connecting, make sure the system’s main power supply unit is
switched off. Insert the control in the metal base plate and make the
connection according to the following instructions:
TERMINALS
1 - SCAN. Connect to Scan line
2 - Input + 16V supply
3 - Output + 16 V, after switch
4 - Ground
15 - Left channel audio 1 input
16 - Right channel audio 1 input
25 - Left channel audio 2 input
26 - Right channel audio 2 input
- - Common ground for speakers
L+ - Output for left speaker
R+ - Output for right speaker
4FA022401
1 - Raise volume/sb push-button
2 - Lower volume/sb push-button
3 - 3.5 mm jack connector for Walkman input.
4 - 3.5 mm jack connector for earphone output
5 - ON/OFF/SLEEP pushbutton
6 - Operation indicator light
7 - Music channel indicator light
8 - Music channel change pushbutton
9 - SCAN pushbutton
10 - MONO / STEREO switch
VERIFICADO
PCP1231/02-02-06
TECHNICAL CHARACTERISTICS
INSTALLATION EXAMPLE
Note: The application mode of the SCAN function depends on the
tuner used. See relative Technical Information on the tuner.
Activate 2nd channel: When the control is connected, by default music
channel 1 is selected, which is indicated by LED (7) being off. If we wish
to listen to channel 2 we will press key (8). Channel 2 is selected by
means of LED (7), which comes on. To return to channel 1 just press
the key again.
Earphones: If you wish to listen to the music through earphones, use
connector (4). When the earphone jack is inserted the speakers will
automatically disconnect.
Walkman: If you wish to reproduce a local sound source (Walkman type)
through the control and speakers use connector (3). You will need the
correct connection cable to connect it to the earphone output of your
walkman (see our catalogue or purchase it from any sound or electronics
shop). When the Walkman is connected the music from the main unit will
automatically be disconnected, regardless of the channel selected, and
the music from the local sound source will be heard.
These characteristics are only given as reference. The manufacturer reserves the right to introduce any amendments without prior notice in order to improve the product.
Supply voltage: 16 V DC
Maximum consumption: 370 mA
Minimum consumption: 25 mA
Rated output power: 1+1 W RMS
Output impedance: 8 Ohm
Maximum output power: 1.5+1.5 W RMS
Distortion: <1%
Maximum output current (Terminal 3): 2 A
Frequency response: 92 Hz-21 KHz. (-3dB)
Signal/Noise ratio: >76 dB
Input sensitivity (Terminals 15, 16, 25, 26): 1.4 V
Walkman input: 400 mV
Crosstalk: 40dB
Earphone output: 1+1 W/8 Ohm
Dimensions (L x W x D): 45x45x45 mm
Weight: 50 grams
NOTE: The SCAN line is only
necessary when any one of the
SONELCO tuners.
CENTRALISATION: Any type of
main unit or our modular system
can be used for power supply and
audio inputs
NOTE
STEREO ROOM
ASSEMBLY RECOMMENDATIONS: All the “Prestige Line” series models can be put into place in various types of flush fitted boxes,
for which we have several types of front frames available, that can be delivered separately. For further details please
www.sonelco.com
Altri manuali Sonelco Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
