Sonos Roam Manuale utente
Roam
Overview The ultra portable smart speaker for
listening at home and on the go—
Enjoy up to 10 hours of continuous playback on a single
charge. When it’s time to recharge:
Connect the included cable to a USB power source
(7.5W minimum; 10W recommended).
Place on a compatible Qi wireless charger.
Place Sonos Roam on its custom wireless charger
(sold separately).
Lightweight, durable, waterproof design is ideal for the
beach, pool parties, and more.
Stream content over WiFi or Bluetooth®.
Compatible with all your other Sonos speakers for multi-
room listening.
Freedom of control using the Sonos app, the speaker
buttons, or your voice.
See Setup when you're ready to add Sonos Roam to
your system.
Controls and lights
Volume control
Press and hold to quickly
change the volume.
Note: You can also use
the Sonos app and voice
control to adjust volume.
Playback control
Sound Swap
Note: You can’t skip
forward or go back when
listening to a radio station.
Volume up (+)
Volume down (-)
Press once to play or
pause audio.
Press and hold to
group with other
speakers. Continue
holding the button
down to move the
sound to and from your
nearest Sonos
speaker.
Double press for next
track.
Triple press for
previous track.
Microphone
Press to turn the
microphone on or off:
Note: If you set up a voice
service and the
microphone is off, you can
still use voice commands.
Just press and hold —
no need to start with a
wake word. When you
release the microphone
button, voice control turns
off again.
When the microphone
light is on, voice
control and
microphone-dependent
features like auto
Trueplay are available.
When the light is off,
voice control and
microphone-dependent
features like auto
Trueplay are
unavailable.
Status light
Displays the product's
connection to WiFi or
Bluetooth, indicates when
the volume is muted, and
signals errors:
Solid white—on
Blinking blue—
Bluetooth pairing mode
Solid blue—
connected to a device
using Bluetooth
Flashing orange—if
the product gets too
hot, the status light
flashes orange and the
product chirps 3 times.
Move the product to a
cooler location, away
from direct sunlight.
Learn more
Battery light
Indicates the battery
status:
Battery Saver: To save
battery life, you can set
Sonos Roam to power off
automatically instead of
going to sleep. Go to >
System, and choose
Sonos Roam. It won't
appear in the Sonos app
until it’s powered back on.
Note: Sonos Roam’s
remaining battery life is
always visible in the
Sonos app.
Blinking orange
indicates low battery.
Solid orange when it
starts charging. The
light may stay on for
several minutes
depending on how low
the battery is. The
battery will continue to
charge when the light
turns off. Learn more
Connector panel
1Power/Bluetooth button Power on/sleep/wake: Short press
(less than 1 second)
When you put Roam to sleep, you’ll
hear a quick tone and the status light
will turn off. Press again to wake. If
you put Roam to sleep, it will stay
asleep for 10 minutes before
powering off.
Bluetooth: To pair with a device,
press and hold until you hear the
second tone and the status light
blinks blue, then select Roam from
your device’s Bluetooth pairing list.
To pair with a different device, wait
until Roam connects to the current
device, then press and hold again to
restart the pairing process.
Power off: Long press (about 5
seconds)
Press and hold until you hear the third
tone. The status light blinks blue, then
turns off.
2USB-C port Use the included cable to connect a
compatible 7.5W minimum (10W
recommended) USB-A power source.
(Sonos 10W USB Power Adapter
sold separately.)
Select location
You can use your Sonos Roam just about anywhere. Here are a few things to keep in mind:
Bluetooth pairing
1. Turn on Bluetooth in your device settings.
2. Press and hold the power button for 2 seconds until you hear two chimes, then release.
The status light blinks blue when the speaker is ready to pair.
3. Choose Sonos Roam from the list of available devices. Your mobile device will
automatically connect next time.
You can place the speaker next to a wall or on a shelf—for best performance, leave at
least 1" (2.5 cm) space around the back of the speaker.
The speaker’s durable design includes silicone end caps to protect from drops or bumps.
Avoid placing the speaker in direct sunlight.
You can place it horizontally or vertically. When vertical, the speaker takes up barely any
room. Position it horizontally for added stability on uneven surfaces.
When the microphone is on, the speaker tunes itself with automatic Trueplay for
amazing sound no matter where you are and what you’re listening to.
TM
Charging
USB-C to USB-A
Use the included cable to
connect a compatible
7.5W minimum (10W
recommended) USB-A
power source. (Sonos
10W USB Power Adapter
sold separately.)
Note: Battery life is visible
in the Sonos app.
Sonos Wireless Charger
(sold separately)
Place the speaker on the
smooth, magnetized side
of the charger for easy
recharging—no extra
wires or cables needed.
Qi charger
Place the speaker on a
compatible Qi-certified
wireless charger.
Altri manuali per Roam
3
Indice
Altri manuali Sonos Altoparlanti
Sonos
Sonos PLAY:5 Manuale utente
Sonos
Sonos Move Manuale utente
Sonos
Sonos PLAY:1 Manuale utente
Sonos
Sonos One Manuale utente
Sonos
Sonos PLAYBASE Manuale utente
Sonos
Sonos PLAY:3 Manuale utente
Sonos
Sonos One Manuale utente
Sonos
Sonos ARC Manuale utente
Sonos
Sonos Roam Manuale utente
Sonos
Sonos Five Manuale utente
Sonos
Sonos PLAYBASE Manuale utente
Sonos
Sonos One Manuale utente
Sonos
Sonos PLAY:3 Manuale utente
Sonos
Sonos Roam SL Manuale utente
Sonos
Sonos PLAY:3 Manuale utente
Sonos
Sonos One SL Manuale utente
Sonos
Sonos One Manuale utente
Sonos
Sonos Era 100 Manuale utente
Sonos
Sonos PLAY:1 Manuale utente
Sonos
Sonos PLAY:1 Manuale utente
