Sound Sation VoxTaker 192 PRO Manuale utente
USER MANUAL / MANUALEUtENtE
www.soundsationmusic.com
Premium Quality 192kHz/24bit
USB Studio Microphone
2
Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mis-
sion is to satisfy all possible needs of musical instrument and profes-
sional audio and lighting users offering a wide range of products using
the latest technologies.
We hope you will be satised with this item and, if you want to collab-
orate, we are looking for a feedback from you about the operation of
the product and possible improvements to introduce in the next future.
Go to our website www.soundsationmusic.com and send an e-mail
with your opinion, this will help us to build instruments ever closer to
customer’s real requirements.
One last thing: read this manual before using the instrument, an incor-
rect operation can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
3
TABLE OF CONTENTS
1. INTRODUCTION .......................................................................................... page 4
2. FEATURES....................................................................................................... page 4
3. WHAT’S IN THE BOX.................................................................................. page 5
4. POWER REQUIREMENTS.......................................................................... page 5
5. HOW TO USE THIS MICROPHONE....................................................... page 6
5.1. Pop-Filter Assembly ................................................................................... page 7
6. SET UP ............................................................................................................. page 8
6.1. Adjusting the input level.......................................................................... page 8
6.2. Adjusting the sample frequency........................................................ page 12
7. MICROPHONE STORAGE ...................................................................... page 13
8. FREQUENCY RESPONSE GRAPH........................................................ page 14
9. POLAR PATTERN GRAPH....................................................................... page 16
10. TECHNICAL SPECIFICATIONS .............................................................. page 17
11. WARRANTY AND SERVICE ................................................................... page 18
12. WARNING ................................................................................................... page 19
4
1. INTRODUCTION
VoxTaker 192 PRO is a groundbreaking-technology studio microphone
for professional recording. It combines dual high-precision large
diaphragm condenser capsule, precision FET preamplication circuitry,
real 24Bit/192kHz sampling accuracy, and USB 2.0 high-speed audio
processing chip.
It is compatible with all recording software and ASIO audio drivers and
offers a professional driver interface with the newest 2.0 class audio
device denition. The built-in monitor interface with 3.5mm stereo
headphone jack, volume and Gain controls, provides real-time zero
latency monitoring for maximum comfort during recording.
The transducer element is a dual-condenser golden-plated large dia-
phragm capsule with selection of Uni/Bi/Omni-directional polar pattern.
All these features make the VoxTaker 192 PRO the perfect tool for any
capturing need: from human voice to acoustic instrument miking, to
background music, to choral and orchestral recording. It is a real helper
for music creation.
2. FEATURES
fProfessional 34mm Pressure Gradient Transducer
fSelectable Uni/Dual/Omni Directional Polar Patterns
fHigh Quality FET Preamp
fStrong Output Signal without Distortion
fHigh-speed AD/DA conversion technology
fUp to 192kHz Sample Frequency (192kHz can only be used
under USB2.0 fast mode)
fUp to 24bit Resolution
fUSB 2.0 high-speed and full-speed modes compatible
fZero latency monitoring and Hi-Fi recording
fMaximum compatibility with Windows and Mac OS com-
puters
5
fCompatible with variety of recording applications and ASIO
audio driver
fLow Power Consumption
fHigh Absorption Shock-mount
fStylish and Innovative Pop Filter
fAluminum Case
3. WHAT’S IN THE BOX
fVoxTaker 192 Pro Microphone
fPop Filter
fShock-Mount Support
fUSB Cable (1.8 m)
fUser Manual
fAluminum Case
High Absorption
Shock-mount
Stylish and
Innovative
Pop-Filter
Aluminum Case USB cable
4. POWER REQUIREMENTS
VoxTaker 192 PRO is powered by the USB port of your device, meaning
that normally you can just plug the microphone in and get started right
away. For non-standard USB ports, a powered USB hub may be required.
The VoxTaker 192 PRO is a “Plug & Play” USB device, compatible with
both Windows and Mac computers. It can be used without driver, allow-
ing 2-channel record and playback at up to 192kHz – 24bit.
The VoxTaker 192 PRO features a blue LED inside the microphone grill
6
that indicates when the microphone is powered. If the light does not
turn on after plugging the microphone in, the computer or device you
are using may not provide enough power for the VoxTaker 192 PRO. If
this is the case, we recommend connecting the VoxTaker 192 PRO via a
powered USB hub.
5. HOW TO USE THIS MICROPHONE
FRONT SIDE
0
-10dB
GAIN
HEADPHONES
+-
+-
REAR SIDE
4
5
6
3
2 1
1. Polar Pattern Selection - This switch has 3 positions. Starting
from left, the rst is Cardiod (pick-up area is in front side); central
position is Dual polar pattern (pick-up areas are front and rear
side); third position is Omni-directional (the microphones picks up
sounds from all directions).
2. -10dB Pad Attenuator - It has two positions. When the switch is
on "0", it doesn't affect the sound; when on "-10dB", it attenuates
10dB the overall signal. It is useful to adapt the microphone to
different audio interfaces or USB input devices.
3. Low-Cut Filter - It has two positions. When it is on " ", it doesn't
affect the sound; when it is on " ". it activates a -10dB low-cut
lter from 100Hz.
7
4. Gain - This knob adjusts gain level to adjust preamp circuitry to
the incoming sound.
5. Headphones - It adjusts monitor sound level to the mini-jack
output (6).
6. Headphones Out - It is the 1/8" stereo jack output where you
can connect your headphones and monitor your sound during
recording.
5.1. Pop-Filter Assembly
We strongly recommend using
the supplied pop-lter for all
vocal recording. This helps in
minimizing plosive sounds
(like hard “P”, “B”, “T” and “K”
sounds) that produce a sudden
jet of air and can cause the cap-
sule to overload and produce
“popping” sounds. An ideal
reference is to keep a distance
of 15-20 cm from the VoxTak-
er 192 Pro with the pop lter
attached.
To mount the pop lter, put
Pop-Filter fork base (1) between
the thread of the microphone
base (2) and the shock-mount
ring screw (3). Tighten the last
ring screw to block the assem-
bly.
1
2
3
8
6. SET UP
Any level and sampling frequency adjustments, in addition to the Gain
regulation through the knob n. 4 on the microphone (see "5. HOW TO
USE THIS MICROPHONE" on page 6), to set the ideal recording level
and quality can be made from within your recording program, or via
your computer system preferences.
To adjust input level and sampling frequency from within your recording
software, refer to the manual provided by the software developer. To
manually adjust your input level and sampling frequency via your com-
puter system preferences, use the following instructions.
6.1. Adjusting the input level
1) Mac OS computer
Connect your VoxTaker Microphone to a USB Port of your computer. Be
sure that the blue LED inside the microphone grill is on. If it doesn't turn
on after plugging the microphone in, the computer may not provide
enough power for the VoxTaker 192 Pro. If this is the case, we recom-
mend connecting the VoxTaker 192 Pro via a powered USB hub.
Click on the Apple symbol at the top left of your screen and select
"System Preferences".
9
Click on “Sound” to open the sound options.
Open the “Input” tab.
10
From here, select “Soundsation VoxTaker192” from the list of devices,
and adjust the input level using the slider.
2) Windows computer
Connect your VoxTaker Microphone to a USB Port of your computer. Be
sure that the blue LED inside the microphone grill is on. If it doesn't turn
on after plugging the microphone in, the computer may not provide
enough power for the VoxTaker 192 Pro. If this is the case, we recom-
mend connecting the VoxTaker 192 Pro via a powered USB hub.
Once the microphone is connected and the internal LED is on, Windows
will automatically search for the USB driver of VoxTaker 192 Pro and
install it in your computer (be sure the PC is connected to the Internet).
This operation will take a few seconds. Please wait until the system
tells you that the device is ready to use in the lower right corner of the
screen.
Open the Start menu and click on "Windows Settings"
Open the "Devices" preferences from within the Windows Settings
folder.
Indice
Lingue:
Altri manuali Sound Sation Microfono
Sound Sation
Sound Sation TTM-30 Manuale utente
Sound Sation
Sound Sation BDM-30 Manuale utente
Sound Sation
Sound Sation MS189 Manuale utente
Sound Sation
Sound Sation SGC120 MKII Manuale utente
Sound Sation
Sound Sation BM-630 Manuale utente
Sound Sation
Sound Sation VOCAL 100 Manuale utente
Sound Sation
Sound Sation CM-1000 Manuale utente
Sound Sation
Sound Sation WF-U99 INEAR Manuale utente
Sound Sation
Sound Sation VISAGE C01 Manuale utente
Sound Sation
Sound Sation VoxTaker 100 USB Manuale utente
Sound Sation
Sound Sation WF-V21 Manuale utente
Sound Sation
Sound Sation PCM-8000 match Manuale utente
Sound Sation
Sound Sation WF-LM10 Manuale utente
Sound Sation
Sound Sation E340 Manuale utente
Sound Sation
Sound Sation TG100 Manuale utente
Sound Sation
Sound Sation GO-SOUND POCKET MIC Manuale utente
Sound Sation
Sound Sation DM99 Manuale utente
Sound Sation
Sound Sation VOCAL 300 PRO 3P Manuale utente
Sound Sation
Sound Sation WF-U199 INEAR Manuale utente
Sound Sation
Sound Sation TG100 Manuale utente
