Special Tomato Jogger Manuale utente
Jogger
User’s manual
2
WARNING: AVOID SERIOUS INJURY FROM FALLING OR SLIDING OUT.
NEVER LEAVE CHILD UNATTENDED.
ALWAYS KEEP CHILD IN VIEW.
IMPORTANT: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
A CHILD’S SAFETY IS YOUR RESPONSIBILITY.
ALWAYS USE THE SEAT HARNESS.
ALWAYS BE SURE TO ENGAGE PARKING BRAKES WHEN IN STAND STILL
THIS VEHICLE IS SUITABLE FOR ONE CHILD.
• Front wheel must be kept in-line for exercise.
• Follow all instrucons carefully. Incorrect use will cause damage to push chair.
• This product has been designed to take the maximum weight of 110lbs (50kg).
• Children should be harnessed in at all mes and should never be le unaended.
• IMPORTANT: It is important for your child’s safety that the harness be correctly ed and adjusted. If not adjusted
correctly in accordance with the instrucons, the stability of the Jogger will be compromised.
• The harness and seat belt are not a substute for proper adult supervision.
• The child should be clear of moving parts while making adjustments.
• IMPORTANT - DANGER: It is important that care is taken to ensure that children are kept clear of the Jogger when
folding or unfolding. Pinch points and scissoring acons are unavoidable during these operaons
• Do not carry addional children, goods or accessories in or on this push chair except as permied in this manual.
They may cause the Jogger to become unstable or place unneeded stress on the Jogger that could lead to breakage.
• Overloading, incorrect folding and the use of accessories, e.g. child seats, bag hooks, rain covers, buggy boards, etc.,
other than those approved by the manufacturer may damage or break this Jogger.
• Any damage caused by the use of accessories not supplied by manufacturer will not be covered by the terms of our
warranty.
• Never leave child in the Jogger when ascending or descending stairs or escalators or when travelling on other forms
of transport.
• The Jogger should always open and fold easily. Do not force it. It may be necessary to re-read the instrucons.
• Negoate curbs and rough ground carefully. Repeated impact will cause damage to the push chair.
• Never allow children to stand on the footrest.
• Do not leave the Jogger exposed to heat, i.e., by a radiator or in direct sunlight.
• Do not place items on the top of the hood as it may cause damage to the canopy.
IMPORTANT
• READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE.
• YOUR CHILDREN’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
• APPLY BRAKE WHEN PARKING THE JOGGER.
FRAMEFRONT WHEEL REAR WHEELS
PARTS
CANOPY SEAT FABRIC
3
1. FRAME
Unpack Jogger from box and set wheels aside.
Push foot plate of Jogger away from handle by
pushing curved crossbar up and out.
Audible click will be heard when Jogger frame is
completely unfolded.
Flip Jogger to upright position.
Clip lower belting around frame to secure
seat fabric.
4
2. FRONT WHEEL
To install front wheel, lay jogger on it’s back so handle and
rear axles are touching the floor.
Engage safety lock on both sides of the fork.
Check before each use.
NOTE: Safety Lock both sides of fork.
2A. FRONT WHEEL IN-LINE LOCKING
The in-line locking mechanism is located behind the front wheel
pivot point.
Pull and rotate knob to lock and unlock. Image shows unlocked.
B
A
C
Insert the Front Wheel into the fork tips by aligning the axle
flats with the fork tip flat surfaces.
Tighten by turning the wheel lever and securing the other side.
Close the wheel lever making sure that it is flush with the
tubing. Be sure not to over tighten.
Front Brake fine adjustment knob.
A
B
C
Image now shows the wheel locked in-line.
Pull and rotate mechanism to unlock.
5
3. REAR WHEEL
To install, gently slide the rear wheel’s axle into the
frames supporting axle hole until you hear it click onto place.
To remove, simply push down the spring lock tab while
pulling out on the wheel.
3A. RAER WHEEL PARKING BREAKE
To apply the parking brake:
Press down on the foot bar..
Disengage the brake:
Pull up on the foot bar.
4. SAFETY HARNESS
Adjusting safety harness:
Unclip hooks.
Remove fleece lining (Velcro tabs shown above).
B
A
B
A
6
Adjust shoulder straps to desired height using the
loops on the seat back.
Slide the plastic guide up and down to adjust strap length.
Once fitting is complete reassemble the fleece lining.
Clip shoulder strap buckle to chest harness.
Unthread harness straps from fleece lining.
B
A
A
B
A
A
To adjust the length of the center strap, move the plastic guide
up and down.
For additional instruction refer to video guide
5. RECLINING SEAT
Simply adjust the recline strap length to desired degree of
recline.
Unlock the buckle for maximum recline.
7
6. REMOVING SEAT FABRIC
Using a phillips head screw driver unscrew
hardware from the frame.
Unsnap fasteners on both sides of jogger.
Unlock seat strap from frame, buckle is
suspended across the back of the jogger.
Unloop Velcro Strap through the D-ring, under
neath the foot well.
NOTE: REMOVE ALL RIGID PARTS BEFORE
WASHING
Joggers are shipped with Seat pre-assembled.
Assembly/Removal instructions are given
if any pre-assembly items are removed for
cleaning or replacement, refer to page 12
for additional information.
7. SHOPPING BASKET
Secure front basket flap by snapping around
the lower foot-well crossbar.
Detail of front shopping basket snaps.
Wrap rear basket straps around the frame and
loop back through the D-ring. Secure the Velcro
strap.
NOTE: The D-ring loops are at the rear of the
basket.
8
8. CANOPY
Fasten the canopy to the portion of the upper frame
that is not covered by fabric. Small holes in the crest
of the frame tubing accept the canopy. Be sure there
are NO obstructions (fabric or brake lines) between
the canopy clip and the frame. There is a small plastic
nipple on the canopy mechanism that fits into the
hole in the frame.
Hook the wire on the back side of the
canopy mechanism and then close the
lever by pressing it to the frame.
DO NOT FORCE TO CLOSE! Double check
for obstructions (fabric or break line/ be sure
nipple is inserted to frame).
9. HANDLE HEIGHT
Unlock lever on both sides of handle.
Adjust to height. Then relock.
9
10. FOLDING
Squeeze mechanism located below the handle.
(Mechanism located on Both Sides)
Fold jogger back.
Secure Jogger in folded position with recline strap.
11. ATTENDANT STRAP
Make sure safety wrist strap is secured properly around your
wrist whenever your child is in the jogger.
10
12. OPTIONAL ACCESSORIES: SEAT AND BACK LINER
Using the provided straps with the Seat & Back Liners, feed
the straps through the slots in Jogger seat & back.
Place the Back Liner Straps into the slot at the height where
you want the laterals will provide support.
The Seat Liner Straps will go through the lowest slots.
Clip the straps for both the Seat & Back Liners to each other
on the back side of the jogger and tighten until secure.
NOTE: The Jogger Chest Harness should lay over the top of
the Back Liner for correct positioning. The Jogger 3-Point
lap belt can be fed through the 3 holes of the Seat Liner for
optional positioning.
Altri manuali per Jogger
2
Indice
Altri manuali Special Tomato Passeggino
Special Tomato
Special Tomato EIO Push Chair Manuale utente
Special Tomato
Special Tomato eio 63000000 Manuale utente
Special Tomato
Special Tomato EIO Puch Chair Manuale utente
Special Tomato
Special Tomato EIO Push Chair Manuale utente
Special Tomato
Special Tomato Jogger Manuale utente
Special Tomato
Special Tomato Jogger Manuale utente
