Spectec SDIO Cameras Manuale utente
TM
Spectec Secure Digital
Palm Camera
SDIO Cameras
User’s Manual
ver. 2.0
Contents
What’s in the Box? ----------------------------------------------- --- -P.1
Software installation ----------------------------------------- --- ---- -P.1
Getting started ---------------------------------------------------- -- -P.1
Overview of 5-function modes and icons ---------------------- -- -P.2
5-function bar icons ------------------------------------------------P.3
* Image mode ------------------------------------------------------P.3
* Video mode --------------------------------------------------- ---P.3
* Slide show auto mode--------------------------------------------P.3
* Slide show mode--------------------------------------------------P.3
* Thumbnail manual mode ------------------------------------ --- P.4
* View List mode --------------------------------------------------- P.4
How to capture an image? ------------------------------------------ P.4
How to capture a video? -------------------------------------------- P.5
How to set the capture timer? ------------------------------------P.5 P.6
How to view saved images or videos? --------------------------P.6 P7
How to view the Image Record Info & add a note? ----------------P.7
How to beam saved images? --------------------------------------- P.8
How to use the ClipBoard ? ------------------------------------------ P.8
How to use the Editing functions ? ----------------------------------- P.9
How to use the ImageAddress Book? ------------------------------- P.9
How to transfer the saved images and videos to your PC ?-------P.10
Warranty ------------------------------------------------------ --------P.11
1
What’s in the Box?
1.Secure Digtal Palm Camera
2.Application Software CD
3.Travel pouch
4. Waranty information
Software installation
1. Insert the CD ROM into the drive of your PC.
2. Auto-run screen will pop-up. Select “SDC-001A/ SDC-003A” then “Palm ”
icon to
start the installation.
Follow the prompts to complete the installation.
3. Run Hotsync to load the applications onto your Palm.
4. After you’ve completed the installation task. Then your Palm will display 2main
icons. ( ImageAddress icon & ViewTake icons )
SDC-001A/ 003A provides 2 main function icons on Palm Application list:
1. ViewTake icon ( Page 3 )
You may select an image mode / video mode/
slide show mode, Thumbnails mode /
View list mode
2. ImageAddress icon ( Page 14 )
You may add an image to the Address
Book database.
Getting started
1.Make sure your Palm is fully charged before you insert the camera.
2.Before you Insert the Camera into your Palm, please make sure the direction of
your Palm SD Card slot.( see 1 )
3.After you insert the camera into the SD expansion slot, check if the
SD Camera’s LED is on.(See 2)If the LED light is on, that means the SD Camera is
working. The screen will display a live image under the Image mode directly.
Then you may start to take images. (see 3)
2
The 5-way button on the Palm models have special functions
Center Button:Captureswhile in Image and Video modes.Up/Down:Controls brightness
in preview modes. Moves Page Up / Page Downin all other modes.Left Button:
In Slideshow, Thumbnail and View List modes, functions as Rewind.Right Button:
In Slideshow, Thumbnail and View List modes, functions as End of file.
Overview of the 5-function modes and icons
ViewTake icon provides 5-function modes for capturing images or viewing saved
images. Also you can edit a note to your images.
1. Image mode: Capturing an image.
2. Video mode: Capturing a video.
3. Slide show mode:
* Play back the saved images automatically or by
manual operation.
* Adding a note or info to images or viewing the
details of saved note and info.
* Beaming or Deleting selected images.
4. Thumbnail mode: Previewing the saved images.
5. View List mode:
* Viewing the details of saved images or adding
a note to images.
* Changing the saved full size images to palm size.
* Beaming or Deleting selected images directly.
3
5- function bar icons
Tap to enter Image mode to start capturing an Image.
Image Mode
Tap to enter Video mode to srart capturing a Video.
Video Mode
Tap to enter Sllde Show mode to start playing back saved images automatically.
Slide Show Auto Mode
Slide Show Manual Mode
4
Tap to enter Thumbnail mode to start viewing saved images.
Thumbnail Mode
Tap to enter View List mode to start viewing the details of saved images.
View List Mode
How to capture an image?
Step1 Insert SD Camera into Palm, then the screen will enter to the image
modedirectly . Or tap ViewTake icon from Palm applications to get into Image
mode.
Step2 Tap icon or press the LED buttonto capture an image.
For Advanced User
Further adjustment icon
Tap to show a Preferenceslist to have a Camera setting options.You may select the
options you want( Such as Playback Speed/ Preview Rotate/ Digital Zoom/ Capture Size/
JPEG quality ), then tap Doneto set or taptheAdvancedicon to display a camera control
list. You may set the Brightness, Contract, Sharpness,Color, BackLight form each adjust-
ment bars directly. After adjusted, tap Doneto complete the setting.
Timer icon -Image capture timer ( Please refer to P.9 )
5
How to capture a video?
Step1 Tap to enter a video mode.
Step2 Start filming by tap and stop filming by tap
For Advanced User
Further adjustment icon ( Please refer to P.7 )
Timer icon -Video capture timer ( Please refer to P.9 )
If the image shows flickering, you may choose the correct anti-flicker control to
improve this issue. This control allows you to switch the anti-flicker control based
on the local power system with choices of 60 or 50 Hertz.
When checked 60 Hz is selected, when unchecked means based on 50Hz.
How to set the capture timer?
You can find the timer icon under the image mode or video mode.
1. Under Image mode:
Tap to show a Image Capture timer screen. You may set up the timer for asingle
capture or multiple captures.
2. Under Video mode:
Tap to show a Video Capture timerscreen. You may set up the duration of a video.
Tap this icon to capture single image after a 10 second
pause.
After you set up the Number of Captureand Time between
Capture. Then Tap this icon to
6
After you fill in the blanks with number for the Video Duration
and Time until capture. Then tap
this icon to start a Video Capture.
Note: When your Palm memory is not enough to save the
images, then you’ll fail to proceed a video capture.
How to view saved images or videos?
You can view the saved images from Slide Show / Thumbnail / View List modeby
tapping
Tap to enter the Slide Show Auto mode.
Slide Show Auto mode The screen will playback the saved images and the first photo
of each video in the current category automatically.
When you tap , then the display will be paused and get
into the Slide Show manual mode.
Slide Show Manual mode Under the Slide Show Manual mode, you may view the im
ages by tapping following icons:
Tap , viewing the firstimages in current category.
Tap , viewing the lastimages in current category.
Tap , viewing the Previousimages in current category.
Tap , viewing the nextimages in current category.
The playback speed can be set by tappingfurther adjustment
icon and then get into the Preferences list to set up the
speed (1x/ 2x/ 4x/ Fast ).
Tap to enter the Thumbnail mode.
Thumbnail mode The screen will show the saved images and the first photo of
video. If the thumbnail showed with a icon, means it’s a
video record.
Tap , viewing the first 9-thumbnail set in current category.
Tap , viewing the last9-thumbnail set in current category.
Tap , viewing Previous9-thumbnail set in current category.
Tap , viewing next9-thumbnail set in current category.
The location of your saved images in current category.
Tap the selected thumbnail, the thumbnai
will get into a Slide Show mode and will be
enlarged into a full screen display.
7
Tap to enter the View List mode.
View List mode
How to view the Image Record Info & add a note?
You can view the Image Record Info from Slide Show Manual mode.
Tapping to open the Image Record Info list.
Tap Noteto add a note.
You can add a note for a saved image from Slide Show Manual mode.
The View List mode will list the saved images and videos on the screen.
Category of saved images.
Tapping the selected item to enter the Slide Show mode.
Then the display will show a full screen images or videos.
Indicate the locations of saved images
in current category.
Tapping to open the Image Record Info Note.
Entering the content and tapping
Ok to save the attach note.
How to beam the saved images?
You can beam the saved images from View List mode.
Step1 Tapping on to select
theitems you
want to beam.
Step2 Tapping to beam the
selected items.
The display will show a Confirm Beamscreen.
Step3 Tapping OK to
beamthe selected items toother
Palm handheld.
How to use the ClipBoard ?
Under Slide Show mode, tap , then tap , the screen will pop-up the Info/
Options/ Clipboard bar.
Select , then you may choose the two function: Copy to Clipboardor Paste
from Clipboard
Copy to Clipboard-This allows transferring images to and from the ImageAddress
application and making copies within the ViewTakeapplication.Only the thumbnail
(160x120) of a JPEG record is copied to the clipboard. When playing a video record
set, if you pause the playback, you can then copy the currently displayed image to
the clipboard. Since the clipboardis only one record deep, copying the clipboard
will overwrite any previous image copied to the clipboard.
Paste from Clipboard-
In ViewTake when you paste from the clipboard the record is added to the end of
the database in the current category.
8
Indice
