SpectraLink 7420 Manuale utente
Spectralink
7420/7440
7520/7540
7620/7640
7710/7720/7740
Handsets
The User Guides for the handsets
are available for download at:
www.spectralink.com
Safety and Regulatory
Instructions
The handset has been
marked with the CE mark.
This mark indicates
compliance with EEC
Directive 1999/5/EC. The
handset also complies
with EEC directives 2006/
95/EC LV, 2004/108/ED
EMC and 2011/65 EC
(RoHS II). A full copy of
the Declaration of
Conformity can be
obtained from Spectralink
Europe ApS,
Langmarksvej 34, 8700
Horsens, Denmark.
K009, K010, K011, K012,K013
14217400_HD.fm Page 1 Monday, August 19, 2013 2:17 PM
The WEEE marking on
this equipment indicates
that the product must not
be disposed of with
unsorted waste, but must
be collected separately.
Visit
www.spectralink.com/
battery-recycling for
further guidance on
battery recycling.
2
Important Safety Instructions
Before using your telephone
equipment, you should always
follow basic safety instruction to
reduce the risk of fire, electrical
shock and injury to persons, and
damage to property.
•Read and understand all
instructions.
•Follow all warnings and
instructions including those
marked on the product.
•Unplug this product before
cleaning. Do not use liquid
cleaners or aerosol cleaners.
Use damp cloth for cleaning.
•Do not install the telephone
equipment in the bathroom or
near a wash bowl, kitchen sink,
14217400_HD.fm Page 2 Monday, August 19, 2013 2:17 PM
3
or laundry tub, in a wet
basement, or near a swimming
pool.
•Slots or openings in the
equipment are provided for
ventilation to protect it from
overheating. These openings
must not be blocked or
covered.
•The product should be
operated only from the type of
power source indicated on the
instructions. If you are not sure
of the type of power supply,
consult your dealer or local
power company.
•Do not overload wall outlets
and extension cords as this
can result in fire or electrical
shock.
•Never push objects of any kind
into this product through
cabinet slots as they may
touch dangerous voltage
points or short out parts that
could result in fire, electrical
shock, or injury. Never spill
liquid of any kind into this
product.
•To reduce the risk of electrical
shock or burns, do not
disassemble this product.
14217400_HD.fm Page 3 Monday, August 19, 2013 2:17 PM
4
Opening or removing covers
may expose you to dangerous
voltages, dangerous electrical
current, or other risks.
Incorrect reassemble can
cause electrical shock when
the appliance is subsequently
used. If the product need
repair, consult your dealer.
•Refer servicing to qualified
service personnel.
•Avoid using telephone during
an electrical storm. There may
be a risk of electrical shock
from lightning.
•Do not use the telephone to
report a gas leak in the vicinity
of the leak.
•Do not place the base or
charger near microwave
ovens, radio equipment, or
non-ground connected
televisions. These appliances
may cause electrical
interference to the base or
handset.
•The charger must be placed on
a hard, flat surface and
connected to a functional
power source depending on
the country of use.
14217400_HD.fm Page 4 Monday, August 19, 2013 2:17 PM
5
•This telephone will not operate
in the event of a blackout.
Please keep a backup phone
for emergencies.
•Installation must be performed
in accordance with all relevant
national wiring rules.
•Plug acts as Disconnect
Device - The socket outlet to
which this apparatus is
connected must be installed
near the equipment and must
always be readily accessible.
•This device and its antenna
must not be co-located or
operating in conjunction with
any other antenna or
transmitter.
•Warning: The earpiece and
loudspeaker region on the
handset can attract and retain
small metallic objects.
Safety: E215601
Intrinsic safety
Do not use the handset in
conditions where there is a danger
of electrically ignited explosions.
14217400_HD.fm Page 5 Monday, August 19, 2013 2:17 PM
6
Exposure to sunlight, heat and
moisture
Do not expose the wireless phone
to direct sunlight for long periods.
Keep the wireless phone away
from excessive heat and moisture.
Spare parts and accessories
Use only approved spare parts and
accessories. The operation of non-
approved parts cannot be
guaranteed and may even cause
damage.
Power failure
In the event of a power failure or
flat battery, you cannot use the
handset to make or receive calls.
Battery Precautions
•Periodically clean the charge
contacts on both the charger
and handset.
•Exercise care in handling
batteries in order not to short
the batteries with conducting
materials such as rings,
bracelets, and keys. The
batteries or conducting
material may overheat and
cause burns or fire.
14217400_HD.fm Page 6 Monday, August 19, 2013 2:17 PM
7
•Do not open or mutilate the
batteries. Released electrolyte
is corrosive and may cause
damage to the eyes or skin.
The electrolyte may be toxic if
swallowed.
•During charging batteries heat
up. This is normal and not
dangerous.
•Lithium cell installation Caution
- Danger of Explosion if Battery
is incorrectly replaced.
Replace only with the same or
equivalent type recommended
by the manufacturer. Dispose
of used batteries according to
the manufacturer’s
instructions.
Notices
Before installing this equipment,
users should ensure that it is
permissible to be connected to the
facilities of the local
telecommunications company.
The equipment must also be
installed using an acceptable
method of connection. The
customer should be aware that
compliance with the above
conditions may not prevent
degradation of service in some
situations.
14217400_HD.fm Page 7 Monday, August 19, 2013 2:17 PM
8
Repairs to certified equipment
should be coordinated by a
representative designated by the
supplier. Any repairs or alterations
made by the user to this
equipment, or equipment
malfunctions, may give the
telecommunications company
cause to request the user to
disconnect the equipment.
Users should ensure for their own
protection that the electrical
ground connections of the power
utility, telephone lines and internal
metallic water pipe system, if
present, are connected together.
This precaution may be particularly
important in rural areas.
EMC CAUTIONS:
Users should not attempt to make
such connections themselves, but
should contact the appropriate
electric inspection authority, or
electrician, as appropriate.
If your telephone equipment
causes harm to the telephone
network, the telephone company
may ask you to disconnect the
system from the line until the
problem has been corrected or
they may discontinue your service
temporarily. If possible, they will
notify you in advance, but if
14217400_HD.fm Page 8 Monday, August 19, 2013 2:17 PM
9
advance notice is not practical, you
should be notified as soon as
possible. You will be informed of
your right to file a complaint with
the FCC.
Your telephone company may
make changes in its facilities,
equipment, operations, or
procedures that could affect the
proper functioning of your
telephone system, If they do and it
is possible, you will be notified in
advance to give you an opportunity
to maintain uninterrupted
telephone service. If you
experience trouble with this
telephone system, disconnect it
from the network until the problem
has been corrected or until you are
sure that the equipment is not
malfunctioning.
Note:
This equipment has been tested
and found to comply with the limits
for a class B digital device,
pursuant to local regulations.
These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
14217400_HD.fm Page 9 Monday, August 19, 2013 2:17 PM
10
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
•Reorient or relocate the
receiving antenna.
•Increase the separation
between the equipment and
receiver.
•Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
•Consult the dealer or an
experienced radio/TV
technician for help.
FCC Note
This device complies with part 15
of the FCC rules. Operation is
subject to the following two
conditions: (1) This device may not
14217400_HD.fm Page 10 Monday, August 19, 2013 2:17 PM
Altri manuali per 7420
1
Questo manuale è adatto per i seguenti modelli
8
Indice
Altri manuali SpectraLink Cornetta
SpectraLink
SpectraLink 6020 Manuale utente
SpectraLink
SpectraLink 7202 Manuale utente
SpectraLink
SpectraLink 7520 Manuale utente
SpectraLink
SpectraLink 75-Series Istruzioni per l'installazione
SpectraLink
SpectraLink 84 Series Manuale utente
SpectraLink
SpectraLink 7202 Manuale utente
SpectraLink
SpectraLink Spectralink 7622 Manuale utente
SpectraLink
SpectraLink S33 Manuale utente
SpectraLink
SpectraLink Spectralink 7502 Manuale utente
SpectraLink
SpectraLink Pivot 87 Series Manuale di servizio
SpectraLink
SpectraLink 80-Series Manuale di istruzioni
SpectraLink
SpectraLink Spectralink 7622 Manuale utente
SpectraLink
SpectraLink 7742 Manuale utente
SpectraLink
SpectraLink Butterfly Series Manuale utente
SpectraLink
SpectraLink 7480 Manuale utente
SpectraLink
SpectraLink 7522 Manuale utente
SpectraLink
SpectraLink 7420 Manuale utente
SpectraLink
SpectraLink 7520 Manuale utente
SpectraLink
SpectraLink 84 Series Istruzioni per l'installazione
SpectraLink
SpectraLink 7202 Manuale utente
