Spedal CL586 Manuale utente
004C1A09-EN
CL586
USER MANUAL
Multifunctional Dashcam
CONTENT
If you have any problems reading this manual or using the product, feel free to contact us
at suppor[email protected]
1. DISCLAIMER AND SAFETY GUIDELINES 1
1.1 Disclaimer 1
1.2 Safety Guidelines 2
2. ACCESSORIES AND INTERFACES 3
2.1 In the box 3
2.2 Product Diagram 4
2.3 Installation Guideline 5
2.4 Interfaces Introduction 8
3. FUNCTIONS AND SETTINGS 9
3.1 General Settings 9
3.2 Carlink and its settings 11
3.3 Recorder and its settings 12
3.4 FM and its settings 13
3.5 Playback and its settings 14
4. APPENDIX 15
4.1 Specifications 15
4.2 Warranty 15
1. DISCLAIMER AND SAFETY GUIDELINES
1.1 Disclaimer
This product is a multifunctional dashcam, which will bring you safe and pleasant driving
experience when the power supply is working normally and the components are not
damaged. Please pay special attention to the cautions and warnings in this User Manual.
You can visit our homepage http://www.spedal.cc to get relevant files of this product,
including this User Manual and other files. Shenzhen Xinzhuang Gude Technology Co. Ltd.
(Spedal) reserves the right to update this User Manual.
The information in this document affects your safety, legal rights and responsibilities. Read
this entire document carefully to ensure proper configuration before use. Failure to follow
the instructions and warnings in this document may result in product damage or other
possible injury or loss. You must strictly follow Spedal's guidelines to install and use the
product, and never use non-standard parts. Before assembling, setting up and using, be
sure to carefully read all the instructions and warnings in this document. This product is not
a toy. Please do not allow children to touch this product or its parts and wires. Please be
careful when operating in scenes where children are present.
By using this product, you hereby signify that you have read this disclaimer carefully and
that you understand and agree to abide by the terms and conditions herein. The user
promises to be responsible for his actions and all consequences arising therefrom. The
user promises to use this product only for legitimate purposes, and agrees to all the terms
and contents of this document and any related policies or guidelines that Spedal may
formulate. You understand and agree that in the absence of videos or photos, Spedal may
not be able to analyze the cause of your product damage or accident, and cannot provide
you with after-sales service such as warranty.
Spedal is not responsible for all losses caused by the user's failure to use the product
in accordance with this User Manual.
In compliance with laws and regulations, Spedal reserves the right of final interpretation of
this document and all related documents of this product. If the manual is updated, revised
or terminated, we will not notify you separately. Please visit the official website of Spedal
for the latest product information. Spedal is a trademark of Shenzhen Xinzhuang Goodo
Technology Co. Ltd. and its affiliates. The product names, brands, etc. appearing in this
article are all trademarks or registered trademarks of their respective companies.
1
1.2 Safety Guidelines
Warnings
●Please use the original cable and power cords only; .
●Do not exceed the rated voltage when using the device; .
●Do not install or operate the device with wet hands; .
●Do not install the device in places of high temperature, humidity; .
●Do not install the device in places of flammable or explosive gases or liquids; .
●Do not install the device in an area interfering with the driver's sight or driving safety; .
●Do not install the device on the airbag cover or within the airbag’s working range; .
●Do not leave the device in a closed vehicle under high temperature for a long time; .
●Do not poke the device and its accessories using sharp objects such as awl or scissor; .
●Do not disassemble, repair or modify the device and its accessories by yourself; .
●Do not install, use or place the device within the reach of any children under 16; .
●Do not cut the charging cable.
Notice: Damage caused to the dashcam as result of not obeying the warnings above is not covered
by the warranty!
Cautions
●Do not press the lens forcefully to avoid lens breakage or lens misalignment; .
●Do not directly touch the lens surface to avoid stains that affect the recording effect; .
●Do not remove the memory card to avoid file damage during the shutdown process;
●When using the memory card for the first time, please format it on the device to ensure
stable reading and writing; .
●When not using the device for a long time, please pull out the memory card to ensure
the memory card’s performance.
2
2. ACCESSORIES AND INTERFACES
2.1 In the box
Before using this product, please check whether the product package contains all of the
following items. If anything is missing, please contact Spedal or your local agent.
Notice: Please use the SPEDAL original cable and accessories only. Gifts and accessories are not
covered by the warranty. The content of this product package is subject to change without notice,
the actual package shall prevail!
3
●Multifunctional Radar Detector
●In-Car charger
●Magnetic Chuck Bracket
●Quick Guide
●32GB TF Card
(Gift)
2.2 Product Diagram
Warning: When the function Carlink is activated, the projection chip and the drive recording chip
will work at the same time. The surface temperature of the heat-dissipating metal sheet can reach
as high as 60℃, which is within normal range of working temperature. Please do not touch the
sheet surface for a long while to prevent being scalded.
4
GPS
TF
AV-IN
USB /
2.3 Installation Guideline
The device is in the storage state when it leaves the factory. Please follow the steps below
to prepare for installation:
1. Take the device and its accessories out of the box or plastic bag; .
2. Tear off the protective film on the screen and lens of the device; .
3. Remove the wire tie that binds the wire.
Installation Position
●Do not install the device in a position blocking the view of the driver or in an unsafe area
●Install the device near the rearview mirror but not in a place blocking the driver vision. .
●Install the device within the wiper blade area to ensure clear capture on rainy days. .
●Do not install the device on the airbag cover or near the airbag operating range. .
●Do not install the device on the protection film to prevent damage to the film. .
●Install the device in a position not affecting any other electronic devices in your vehicle.
Note: Please follow the instruction or warnings above strictly. Our company assumes no
responsibility for any injury or death caused by car impact or airbag problems.
5
TF Card Installation
Install the TF card in the TF socket with the pins facing upwards. Push the Micro SD card
forward, and the card can be removed after it pops out.
Please use the 32GB TF card that comes with the product. A third-party TF card should
meet these requirements: Class 8 or above, maximal 128GB.
Note: Installing and removing the TF card in the recording mode may result in failure of recording
videos and causing damage to the SD card. Please turn off the device before inserting or
unplugging the TF card.
Note: When recording or snapping, if the SD card is not inserted or the SD card is abnormal, the
device will broadcast an alarm sound of "dididi" and show a pop-up window to remind the user
that the TF card is not inserted.
6
Installation Method
1. Aim the magnetic transfer slide buckle at the mount buckle on the device. .
2. Hold the device and chuck bracket with your hands, and aim the mount at the chuck
bracket on the device. .
3. Select a proper position (such as the center of the rearview mirror), attach the suction
mound to the windshield and rotate the mount clockwise to lock. .
4. Adjust the recording angle (it is the best angle that the car front shows in the middle of
the display).
Note: The first and second steps have been completed when the product leaves the factory. You
only need to perform the third and fourth steps.
7
2.4 Interfaces Introduction
Main Interface
When you connect the device to the vehicle via the in-vehicle charging cable, the device
powers on after the vehicle starts. If you want to connect the device to the power in any
other way, press and hold the power button to turn it on. The screen after turning on the
device is as follows.
Note: For more detailed introduction of the device functions and settings, please refer to 3.
FUNCTIONS AND SETTINGS.
No.
Area
Function
①
Time & Date
The time and date can be set in the settings.
②
Settings
General settings of the device.
③
Carlink
Mobile phone projection onto the device.
④
Recorder
Photo and video shooting during drive process.
⑤
FM
Mobile phone FM connection to the car loudspeaker.
⑥
Playback
View the photos and the videos.
8
12:00
08-08 Sun.
Settings
Carlink
Recorder
FM
Playback
①
②
③
④
⑤
⑥
Altri manuali per CL586
1
Indice
Altri manuali Spedal Telecamera da cruscotto
