J3 cable can be sourced from any video store
4. Functionality
The SBE1 is available in two different flavors:!
SD – Standard Definition!
HD – High Definition!
!
Common functions that are supported by both flavors:
•IP Streaming of captured video using the following format:!
Mpeg2Ts over RTP with H264 compression.
•Receiving protocol commands from the user through RS232 (J2
connector) or through IP over Ethernet (J6 connector)
•Sending protocol commands to the camera through J1
connector
•Recording the video on the SD card upon protocol command.
Adding GPS meta data to stored frames.
•Tracking object in the video upon protocol command.
•Notify loss of object tracking through protocol.
•Detecting motion in the video upon protocol command.
•Notify motion detection through protocol.
Connecting SBE1 to Ethernet
The wire harness includes a Molex 51021-0500
connector and RJ-45 Jack (Female) and 50cm
[19.5”] long ultra flexible wires.
