SPRT POS8810 Series Manuale utente

SPRT®

POS Thermal Receipt Printer

（POS8810）

User’s Manual

（Ver 1.02）

Beijing Spirit Technology Development Co.,Ltd.

www.sprt-printer.com

Content

NOTICE...........................................................................................................................................................1

Notice of Safety..............................................................................................................................................1

Notice of Using...............................................................................................................................................1

Notice of Storing............................................................................................................................................ 2

Introduction..................................................................................................................................................... 2

Chapter 1 Feature and Performance......................................................................................................... 3

1.1 Print Performance...........................................................................................................................3

1.2 Print Paper....................................................................................................................................... 3

1.3 Print Font..........................................................................................................................................3

1.4 Interface............................................................................................................................................4

1.5 Print Control Commands............................................................................................................... 4

1.6 Power Supply.................................................................................................................................. 4

1.7 Operation Environment..................................................................................................................5

1.8 Outline Dimension.......................................................................................................................... 5

1.9 Model classification........................................................................................................................ 5

Chapter 2 Operation Specification............................................................................................................. 6

2.1 Printer Appearance.........................................................................................................................6

2.2 Paper Installation............................................................................................................................ 7

2.2.1 Paper Loading......................................................................................................................7

2.2.2 Solution to Paper Jam........................................................................................................ 7

2.3 Interface............................................................................................................................................7

2.3.1 Serial interface.....................................................................................................................7

2.3.2 LAN interface....................................................................................................................... 8

2.3.3 USB Interface.......................................................................................................................9

2.3.4 Bluetooth Interface..............................................................................................................9

2.3.5 WIFI interface.....................................................................................................................10

2.3.6 Cash Drawer Interface......................................................................................................11

2.3.7 Power Connection.............................................................................................................12

2.4 Buttons and Indicators................................................................................................................. 12

2.5 Power on status............................................................................................................................ 15

2.6 Self-test.......................................................................................................................................... 15

2.7 Hexadecimal Printing................................................................................................................... 17

2.8 Parameter Setting.........................................................................................................................17

2.9 Enter the program upgrade mode..............................................................................................17

Chapter 3 Printer Driver Installation......................................................................................................... 18

Appendix A....................................................................................................................................................19

NOTICE

Please read this manual carefully before using the printer!

Notice of Safety

◆Do not touch the tear bar of the printer

◆Do not touch the print head and its connecting parts to avoid burns or damage to the print

head due to static electricity.

◆If the printer emits smoke, odor, or abnormal noise, turn off the machine immediately.

Continued use may cause a fire. The power should be turned off immediately and contacted by

the dealer or the SRPT Customer Service Center for instructions.

◆Do not disassemble the printer by yourself. Improper repairs are dangerous and will break the

promise of warranty by supplier.

◆Use the power adapter supplied by the supplier or that meets the specifications. Improper

power adapters may damage the machine and cause a fire.

◆Prevent other objects entering into the printer to avoid damage of components. Foreign

objects may even cause a fire or accident.

◆If water or other liquids flow into the printer, immediately turn off the power and contact the

dealer immediately to inquire about the handling method. Continued use may cause a fire.

Notice of Using

◆Water or other liquid should not be spilled into the printer, also the printer should not be

appeared in the rain, or else may cause printer damage.

◆Please do not open the paper case cover when it is printing, otherwise the printer may work

improperly.

◆If printer works with USB connection, USB cable should not be pulled out during the printing

process. Otherwise the data will be incomplete. When printer works with Bluetooth connection,

the distance of communication should be within 10 meters, otherwise the printer doesn’t print or

prints messy code.

◆Although the printer can work steadily when the environment temperature is between 0℃to

50℃, too high(45℃)or too low(5℃) environment temperature will affect printing quality.

◆Too high (above 85% relative humidity) environment humidity or too low (below 20% relative

humidity) environment humidity will effect the printing quality.

◆The printer paper roll with poor quality or stored for too long time also may reduce the printing

quality, sometimes even damages the printer.

◆When the printer works in the black mark detection mode (when printing pre-printed receipts

with black marks), the black mark pre-printed on the printing paper is required to comply with the

black mark printing specifications (refer to Appendix B: Pre-printed black mark instructions for

details), otherwise It may cause the printer to fail to accurately detect the black mark.

Notice of Storing

The printer should be placed in such an environment that the temperature is between-20℃and

60℃, and the relative humidity is between 10% and 90%.

Introduction

SP-POS8810 printer is a new type line thermal printer, it features in fast speed print, low print

noise, high reliability, perfect print quality and ribbon needless, avoiding the vexation of regular

maintenance.

SP-POS8810 printer: small in outline dimension, simple operation, and extensive application,

especially suitable for commercial cash register, PC-POS, bank POS and all kinds of receipts

print.

Warning

This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be

required to take adequate measures.

Chapter 1 Feature and Performance

1.1 Print Performance

●Print method: direct thermal

●Print paper width: 79.5±0.5mm

●Print density: 8 dots/mm, 576 dots/line

●Print speed: max 200mm/s (25% density)

●Reliability

(1) Print head life: 150km

Using condition:

＊Print 12 × 24 ASCII characters, print 50 lines each time, intermittent print repeatedly

＊Use specified thermal paper

(2) Cutter life: 1500,000 cuts

(3) Valid print width: 72mm

1.2 Print Paper

●Thermal paper roll model: TF50KS－E (Japan paper co.ltd)

AF50KS-E (JUJO THERMAL)

●Thermal paper roll: Paper Type－－Thermal Paper 80mm xφ80mm（max）

Inner Diameter－－－φ13mm (min.)

Thickness －－－ 0.06mm～0.08mm

1.3 Print Font

●ANK Character Set

12×24 dots,1.5（W）×3.00（H）mm

●GB GB2312-80(Chinese):

24×24 dots,3.00（W）×3.00（H）mm.

1.4 Interface

●RS-232C serial interface (optional):

DB9 socket (hole type), supports XON/XOFF and DTR/DSR protocols.

Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps adjustable.

Data structure: 1 start bit + (7 or 8) data bit + 1 stop bit.

Parity: no parity or odd and even parity optional.

●Ethernet Interface: Normal Ethernet interface.

●USB Interface:USB interface

●Bluetooth interface (optional):

Dual-mode Bluetooth interface.

●Cash Drawer Control

DC24V, 1A, 6-pin RJ-11 socket.

● WIFI interface (optional):

Support 802.11b/g/n wireless standard (2.4GHz).

1.5 Print Control Commands

● Character print commands: support double-width, double height print of ANK characters,

user-defined characters and Chinese characters, the character line spacing is adjustable.

● Graphics print commands: support the print of bit-map graphics and download bit-map graphics

with different density

●GS barcode print commands:

Support UPC-A, UPC-E, EAN-13, EAN-8, CODE39, ITF25, CODEBAR, CODE93, CODE128,

PDF417, QR code, DATA Matrix code print.

1.6 Power Supply

● DC24V±10％, 2A, DC005-2.5 power socket

1.7 Operation Environment

● Operation temperature: 0～50℃; Relative humidity: 10～80％

● Storage temperature: -20～60℃; Relative humidity: 10～90℃

1.8 Outline Dimension

● 179(L)mm×140(W) mm×138 (H)mm

● Weight: 1120g (without paper)

1.9 Model classification

Model

Interface

SP-POS8810UE

USB Interface, LAN Interface, Cash Drawer Interface

SP-POS8810M

USB Interface, LAN Interface, Cash Drawer Interface,

RS232C serial Interface

SP-POS8810UEW

USB Interface, LAN Interface, Cash Drawer Interface, WIFI

SP-POS8810UEWVT

USB Interface, LAN Interface, Cash Drawer Interface, WIFI

SP-POS8810UEBTDMVT

USB Interface, LAN Interface, Cash Drawer Interface, BTDM

(Dual-mode Bluetooth)

Chapter 2 Operation Specification

2.1 Printer Appearance

The names of the various parts of the printer are shown in Figure 2-1

Figure 2-1 The name of each part of the printer

2.2 Paper Installation

2.2.1 Paper Loading

SP-POS8810 printer uses 79.5±0.5mm wide thermal paper roll.

The thermal paper installation steps are as follows:

Raise the door opener to open the cover, insert the paper shaft through the paper roll core (when

there is a paper shaft), pull out part of the paper and put the paper roll into the paper shaft card

slot inside the paper bin, and place the protruding paper on On the movement, align the paper

parallel to the paper exit direction of the movement, and close the upper shell tightly with a little

force.

1. Pay attention to the direction of loading the paper roll so that the printing side faces

the machine head.

2. Do not use your hand to move the paper forward or backward.

3. Keep clean of the print head, avoid to influence the printing quality.

2.2.2 Solution to Paper Jam

If the cutter is jammed, you can pull up the door opener to open the shell, and the cutter will

automatically return to its original position. If there is a paper jam, the cutter can open the shell

and take out the paper.

2.3 Interface

2.3.1 Serial interface

The serial interface of the SP-POS8810 printer is compatible with RS-232C and supports

RTS/CTS and XON/XOFF handshake protocols. The interface seats a DB-9 socket. The

！Caution!

definition of each pin is shown in Figure 2-2.

number

Signal

name

Source

Explanation

TXD

Printer

The printer sends the control

code X-ON/X-OFF and data to

the host

RXD

Host

compu

ter

The printer receives data from

the host

DSR

Printer

Same as CTS

CTS

Printer

When the signal is in the

"MARK" state, it means that the

printer is "busy" and cannot

receive data, and when the

signal is in the "SPACE" state, it

means that the printer is

"ready" and can receive data.

GND

——

Signal ground

Figure 2-2

2.3.2 LAN interface

The model with Ethernet interface use RJ45 Network socket. The appearance is as Fig.2-2

shows:

Fig.2-3 LAN cable interface

Models with network ports can be configured for DHCP or static IP connection, and the printer

uses static IP connection by default. The DHCP operation method is as follows:

1. Turn on DHCP: Press and hold the [FEED] key and turn on the [Face] to turn on the machine.

After turning on the key, do not release the key. Release the [FEED] key after the status indicator

and the out of paper indicator flash alternately. Then press the [FEED] key three times, close the

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente