
6
Step 4: Insert the strip into the Strip Carrier
Please refer to the section “How to insert the ImmuView®strip in the Strip Carrier”,
at the end of this quick guide, for a detailed description.
Step 5: Insert the Strip Carrier in the ImmuView® Reader
Insert the Strip Carrier (including the ImmuView®strip)
in the ImmuView® Reader when the screen says, “Insert
Test”. When you hear/feel a “click”, the Strip Carrier is in
place and the ImmuView® Reader will start to analyse the
strip.
Once you have inserted the Strip Carrier, no further actions are required.
The reading takes around 40 seconds.
When the reading is done, the test result will
automatically be shown on the screen.
The Strip Carrier must be left inserted in the ImmuView®
Reader during this phase of analysis.
Result
After the analysis, the ImmuView® Reader makes a
sound, to indicate that the analysis is nished.
This example shows that both Legionella and
S. pneumoniae are negative. Please also notice
the text “Control: VALID”, which indicates that
the test is valid.
Back Front
Strip placement
Make sure ”P&L” is visible & placed as shown in the picture.