ST SPC58XXADPT100S Manuale utente

Introduction

This document provides guidelines for describing, configuring and using the mini module SPC58XXADPT100S.

Figure 1. Overview of SPC58XXADPT100S mini module - top

SPC58XXADPT100S

UM2661

User manual

UM2661 - Rev 1 - January 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC58XXADPT100S mini module is an evaluation board supporting STMicroelectronics SPC58xGxxE3,

SPC58xCxxE3, SPC58xBxxE3 microcontrollers in TQFP100 package with exposed pad down.

The SPC58XXADPT100S mini module is designed to be connected onto the SPC57xxMB motherboard, offering

a mechanism for easy customer evaluation of the supported devices, and facilitating hardware and software

development.

High density connectors provide the interface between the EVB and MCU daughter cards and help the

developers to evaluate all device peripherals.

This user manual provides information on using SPC58XXADPT100S mini module board and its hardware

features.

The mini module may be used as a stand-alone unit allowing access to the CPU, but no access to the I/O pins as

any motherboard peripherals.

Figure 2. Overview of SPC58XXADPT100S mini module - bottom

1.1 Package contents

An SPC58XXADPT100S adapter package includes the following items:

• SPC58XXADPT100S mini module

UM2661

Overview

UM2661 - Rev 1 page 2/23

• Mini CD with user manual

1.2 Supported device

The SPC58XXADPT100S mini module supports the following STMicroelectronics family of Microcontrollers in

TQFP100 package with exposed pad down:

• SPC58xGxxE3

• SPC58xCxxE3

• SPC584BxxE3

• SPC582BxxE3

UM2661

Supported device

UM2661 - Rev 1 page 3/23

2SPC58XXADPT100S features

2.1 Mini module features

The SPC58XXADPT100S mini module board has the following features:

• Connector for external power supplies input: 5 V, 3.3 V, 1.25 V (for stand-alone mode)

• Reset button with driver and led indicator

• Socket for device in TQFP100 package with exposed pad down

• Debug ports:

– 34-pin SAMTEC connector for Nexus 2

– 14-pin header connector for JTAG port

• 40 Mhz crystal main oscillator with jumpers to optionally disconnect it

• 8 Mhz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector to optionally disconnect it

• Jumper for boot configuration

• X SAMTEC QSH series, 240 way connector to connect mini module to motherboard

2.2 Hardware dimension and PCB component view

The mini module has the following dimension:

• 127 mm x 114.3 mm (PCB dimension)

• Max top components height 19 mm

• PCB thickness: 1.6 mm

• Max bottom components height 3.5 mm

UM2661

SPC58XXADPT100S features

UM2661 - Rev 1 page 4/23

Figure 3. SPC58XXADPT100S top component view

UM2661

Hardware dimension and PCB component view

UM2661 - Rev 1 page 5/23

Figure 4. SPC58XXADPT100S bottom component view

2.3 Pin numbering for jumpers

Close to selection jumper (both 3-pin and 4-pin), are shown in silkscreen the indications of connections.

See below some examples.

Figure 5. Selection jumper scheme

UM2661

Pin numbering for jumpers

UM2661 - Rev 1 page 6/23

3Hardware and jumper settings

3.1 Power supplies

When the mini module is plugged into the motherboard, power is supplied directly by the motherboard. In this

setup, the external power supply input available on the mini module should NOT be used.

When the SPC58XXADPT100S mini module is used as a stand-alone board, external power supplies must be

used (5 V, 3.3 V, 1.25 V).

The following jumpers are used to configure the power supply:

Table 1. Supply related jumpers

Jumper Description Default

J2 Jumper to enable the use of Supply 3.3V_SR Closed

J3 Jumper to enable the use of Supply 5.0V_SR Closed

J4 Jumper to enable the use of Supply 1.25V_SR Closed

VDD_HV_ADR voltage configuration:

• 1-2 5.0V_LR

• 2-3 3.3V_SR

• 2-4 5.0V_SR

1-2 (5.0V_LR)

VDD_HV_ADV voltage configuration:

• 1-2 5.0V_LR

• 2-3 3.3V_SR

• 2-4 5.0V_SR

1-2 (5.0V_LR)

VDD_HV_IO_MAIN voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2 (5.0V_SR)

J11

VDD_LV voltage configuration:

• 1-2 1.25V_SR

• 2-3 1.25V from Ballast circuit

1-2 (1.25V_SR)

J12

Supply for BALLAST circuit configuration:

• 1-2 VDD_HV_IO_MAIN

• 2-3 5.0V_SR

1-2 (VDD_HV_IO_MAIN)

JP1 VDD_HV_FLA voltage configuration, connect or disconnect VDD_HV_FLA from

VDD_HV_IO_MAIN

Closed

(Connect VDD_HV_FLA to

VDD_HV_IO_MAIN)

UM2661

Hardware and jumper settings

UM2661 - Rev 1 page 7/23

3.2 Microcontrollers configuration

The following jumpers need to configure the board for used STMicroelectronics microcontroller:

SPC58xCxxE3

Table 2. Microcontroller SPC58xCxxE3 configuration related jumpers

Jumper Description Default

J10

VDD_HV_IO_FLEX voltage configuration:

(Used only for SPC58xCxxE3)

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

JP3

Device pin 50 function configuration:

• 1-2 PA[15]

• 2-3 VDD_LV

1-2

(Connect pin 50 to PA[15])

J13

RSTIN configuration:

• 1-2 PORST

• 2-3 ESR0

1-2

(PORST)

J26

Device pin 95 function configuration:

• 1-2 PC[12]

• 2-3 VDD_HV_IO_FLEX

2-3

(Connect pin 95 to VDD_HV_IO_FLEX)

J14

Device pin 11 function configuration:

• 1-2 PC1

• 2-3 ESR0

1-2

(Connect pin 11 to PC[1])

JP7

Device pin 68 function configuration:

• 1-2 PM[14]

• 2-3 ESR0

1-2

(Connect pin 68 to PM[14])

JP2

Device pin 1 function configuration:

• 1-2 PD[14]

• 2-3 VDD_LV

1-2

(Connect pin 1 to PD[14])

J27

Device pin 86 function configuration:

• 1-2 PH[4]

• 2-3 BCTRL

2-3

(Connect pin 86 to BCTRL)

JP5

Device pin 26 function configuration:

• 1-2 PI[6]

• 2-3 VDD_LV

1-2

(Connect pin 26 to PI[6])

The following jumpers need to configure the board for used STMicroelectronics microcontroller:

•SPC582BxxE3

•SPC584BxxE3

Table 3. Microcontroller SPC582BxxE3, SPC584BxxE3 configuration related jumpers

Jumper Description Default

J10

VDD_HV_IO_FLEX voltage configuration:

(Used only for SPC58xCxxE3)

• 1-2 5.0V_SR

• 2-3 3.3V_SR

Open

UM2661

Microcontrollers configuration

UM2661 - Rev 1 page 8/23

Jumper Description Default

JP3

Device pin 50 function configuration:

• 1-2 PA[15]

• 2-3 VDD_LV

1-2

(Connect pin 50 to PA[15])

J13

RSTIN configuration:

• 1-2 PORST

• 2-3 ESR0

1-2

(PORST)

J26

Device pin 95 function configuration:

• 1-2 PC[12]

• 2-3 VDD_HV_IO_FLEX

2-3

(Connect pin 95 to VDD_HV_IO_FLEX)

J14

Device pin 11 function configuration:

• 1-2 PC1

• 2-3 ESR0

2-3

(Connect pin 11 to ESR0)

JP7

Device pin 68 function configuration:

• 1-2 PM[14]

• 2-3 ESR0

1-2

(Connect pin 68 to PM[14])

JP2

Device pin 1 function configuration:

• 1-2 PD[14]

• 2-3 VDD_LV

1-2

(Connect pin 1 to PD[14])

J27

Device pin 86 function configuration:

• 1-2 PH[4]

• 2-3 BCTRL

2-3

(Connect pin 86 to BCTRL)

JP5

Device pin 26 function configuration:

• 1-2 PI[6]

• 2-3 VDD_LV

1-2

(Connect pin 26 to PI[6])

The following jumpers need to configure the board for used STMicroelectronics microcontroller:

SPC58xGxxE3

Table 4. Microcontroller SPC58xGxxE3 configuration related jumpers

Jumper Description Default

J10

VDD_HV_IO_FLEX voltage configuration:

(Used only for SPC58xCxxE3)

• 1-2 5.0V_SR

• 2-3 3.3V_SR

Open

JP3

Device pin 50 function configuration:

• 1-2 PA[15]

• 2-3 VDD_LV

2-3

(Connect pin 50 to VDD_LV)

J13

RSTIN configuration:

• 1-2 PORST

• 2-3 ESR0

2-3

(ESR0)

J26

Device pin 95 function configuration:

• 1-2 PC[12]

• 2-3 VDD_HV_IO_FLEX

1-2

(Connect pin 95 to PC[12])

J14

Device pin 11 function configuration:

• 1-2 PC1

• 2-3 ESR0

1-2

(Connect pin 11 to PC[1])

UM2661

Microcontrollers configuration

UM2661 - Rev 1 page 9/23

Jumper Description Default

JP7

Device pin 68 function configuration:

• 1-2 PM[14]

• 2-3 ESR0

2-3

(Connect pin 68 to ESR0)

JP2

Device pin 1 function configuration:

• 1-2 PD[14]

• 2-3 VDD_LV

2-3

(Connect pin 1 to VDD_LV)

J27

Device pin 86 function configuration:

• 1-2 PH[4]

• 2-3 BCTRL

2-3

(Connect pin 86 to BCTRL)

JP5

Device pin 26 function configuration:

• 1-2 PI[6]

• 2-3 VDD_LV

2-3

(Connect pin 26 to VDD_LV)

The jumpers are default closed for STMicroelectronics microcontroller:

•SPC58xCxxE3

3.3 Port configuration

The following jumpers need to configure the ports:

Table 5. Port related jumpers

Jumper Description Default

J15 TESTMODE settings Close

3.4 System clock configuration

The mini module supports the usage of crystal clock sources as well as external clock source:

Table 6. Main clock related jumpers

Jumper Description Default

J17 40 MHz crystal clock source Enable for pin EXTAL 1-2 (XT1 pin2)

J19 40 MHz crystal clock source Enable for pin XTAL 1-2 (XT1 pin1)

J20 Enable 8 MHz oscillator power supply Open

J22 External clock source from 8 MHz oscillator or SMA connector 1-2 (8 MHz oscillator )

UM2661

Port configuration

UM2661 - Rev 1 page 10/23

Indice

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente