Stardom iTANK MT1-B31BP Manuale utente
iTANK
User Manual
MT1-B31BP
» MT1-B31BP User Manual..................................1
1. Environmental Requirements..................................................1
2. Product Appearance and Packaging Content......................1
3. Hardware Requirements and Precautions ............................2
4. Description of HDD Indicators ................................................3
5. Hardware Installation................................................................3
6. Power Select Switch ................................................................4
7. Install The Operation System Into This Device .............5
» MT1-B31BP 產品使用說明 ................................10
1. 環境需求.....................................................................................10
2. 產品外觀及包裝內容.................................................................10
3. 硬體需求與注意事項.................................................................11
4. 燈號說明.....................................................................................12
5. 硬體安裝.....................................................................................12
6. 供電選擇開關.............................................................................13
7. 外接磁碟安裝作業系統.............................................................14
iTANK MT1-B31BP User Manual
v0.1
iTANK MT1-B31BP User Manual
1
1. Environmental Requirements
About this Manual
Thank you for choosing the STARDOM product. This manual will familiarize you with the STARDOM
MT1-B31BP product. We recommend reading through this manual before using the STARDOM MT1-
B31BP product. The information provided in this manual was checked before publication, but the actual
product specifications may have changed before shipping; Latest product specifications and updates
can be found at www.STARDOM.com.tw. No separate notifications will be provided by our company. If
you would like to receive the latest STARDOM product information, manuals, and firmware, or have any
questions regarding STARDOM products, please contact your local supplier or visit www.STARDOM.
com.tw for more information.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
Operating temperature: 0 ～40 ℃(32 ～104 ℉)
Storage temperature : -20 ～47℃(-4 ～116 ℉)
Operating voltage: 100 ～240V AC
» MT1-B31BP User Manual
2. Product Appearance and Packaging Content
The following items should be inside the package upon opening:
MT1-B31BP
MT1-B31BP product x1 (containing HDD enclosure x1)
USB 3.2 cable x1
Quick setup guide x1
Ejector pins
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the official website - Download page (http://www.stardom.com.tw/STARDOM2016/
download.php) to download other related resources.
iTANK MT1-B31BP User Manual
2
Front and rear view
3. Hardware Requirements and Precautions
1. The usable storage capacity of the hard disk after formatting will be less than the capacity
indicated on the hard disk.
2. To prevent data loss, do not remove MT1-B31BP while the system is running.
3. Please always connect the USB cable to the computer to ensure the energy saving function
operating normally.
4. If the MT1-B31BP needs to be shut down or disconnected, please ensure the HDD is safely
removed through your operating system before turning off the power.
5. The USB Type-C for Power Input only functions as a power input and cannot be used for data
transfer.
6. If you are using a USB 3.2 C to A cable, the Type-A on the host side must be USB 3.2 Gen2 for
best access performance.
7. We strongly recommend backing up important data stored on the MT1-B31BP to another storage
device or a remote site. STARDOM will not be held liable for the damage or loss of data you stored
on the MT1-B31BP.
A. HDD access light
B. HDD tray handle
C. HDD tray ejection hole
D. USB Type-C for Power Input (Power input only)
E. USB 3.2 Gen2 Type-C port (10Gbps)
F. Power select switch
Front View
Rear View
NOTE:
Please make sure that the product is connected to the host (power on status)
before turning on the power, otherwise the product will be on the sleep mode.
iTANK MT1-B31BP User Manual
3
5. Hardware Installation
Please follow the instructions below to complete the hardware installation.
1. Place the system on a stable surface. Ensure that the vent is not blocked and that it is installed in
a well-ventilated area. (Please keep the product away from moisture and other environment that
might be harmful to the product)
2. Use the ejector pin included in the accessory kit to eject the HDD enclosure handle, and then pull
tray handle to remove it.
3. Mount the 2.5" HDD onto the removable tray.
4. When the HDD installation has been completed, insert the tray into the system horizontally and
secure the latch into place.
5. Connect the relevant cables, please see the next section for details.
6. Please make sure that the product is connected to the host (power on status) before turning on
the power, otherwise the product will be on the sleep mode.
7. After completing hardware installation, turn on the power and follow the instruction of Disk Utility
to format the HDD, you then could start using your new MT1-B31BP.
4. Description of HDD Indicators
Status HDD Status Light
No HDD Blue light off
Data access Blue light flashing
HDD idle Blue light always on
Sleep mode Blue light off
iTANK MT1-B31BP User Manual
4
6. Power Select Switch
1. If the factory default setting of the Power Select switch is USB position (this state is powered by
a desktop or laptop), connect one end of the USB cable in the accessory to the USB 3.2 Gen2
Type-C port of the MT1-B31BP (as shown in position 1 above), and the other end to the USB port
of the desktop or laptop.
2. If the Power Select switch is switched to DC position (this state is to enhance the power driving
capability of MT1-B31BP), you should connect one end of the USB cable in the accessory to the
USB 3.2 Gen2 Type-C port of MT1-B31BP (as shown in the position marked 1 above) and the
other end to the USB port of the desktop or laptop. The other end is connected to the USB port of
the desktop or laptop. In addition, you can use the 5V/1A charger of the cell phone (up to 5V/2A)
or use the USB Type-C of the computer to connect to the USB Type-C for Power Input of the
MT1-B31BP (as shown in the position labeled 2 above); without external power supply, the MT1-
B31BP will not be able to boot up normally, so you need to switch the Power Select switch to the
USB position. The MT1-B31BP will not start normally without external power supply, and you need
to switch the Power Select switch to the USB position to use it normally.
3. Due to the different power consumption status of 2.5 HDD/SSD, the MT1-B31BP may not
start normally due to insufficient power supply to the desktop or laptop. If the power supply is
insufficient, the following conditions will occur:
a. The computer cannot recognize the MT1-B31BP
b. Data cannot be transmitted
c. Data transmission will be repeatedly disconnected and reconnected.
4. Please note that the MT1-B31BP's USB Type-C charging port can only accept 5V/1A (maximum
5V/2A); STARDOM will not be held responsible for any accidents caused by using more power
than the limit.
iTANK MT1-B31BP User Manual
5
7. Install The Operation System Into This Device
1. Need to have network online capabilities. If a wireless network is available, you can choose it
from the Wi-Fi menu in the menu bar. This menu is also available in macOS Recovery.
2. Turn on your Mac and immediately press and hold Command ( ⌘)-R. Continue holding until you
see the Apple logo or a spinning globe. Startup is complete when you see the utilities window:
3. If you need to erase your disk before installing macOS, select Disk Utility from the Utilities window,
then click Continue. You probably don't need to erase, unless you're selling or giving away your
Mac or have an issue that requires you to erase.
Install macOS (Use macOS Mojave 10.14 for example)
iTANK MT1-B31BP User Manual
6
4. Install macOS. Choose Reinstall macOS from the Utilities window, and click continue.
5. Follow the onscreen instructions, select agree to the software license agreement, and then select
the disk to start the installation.
6. Please allow installation to complete without putting your Mac to sleep or closing its lid. During
installation, your Mac might restart and show a progress bar several times, and the screen might
be empty for minutes at a time.
iTANK MT1-B31BP User Manual
7
Install Windows
1. The following content is an example of using the software "WinToUSB Free Edition". For related
specifications and copyrights, please refer to the software official website for details.
2. After the software is installed, press the shortcut icon of the desktop twice to open Hasleo
WinToUSB.
3. On the left side of the interface, select "Mirror to USB" and click the right folder icon to select the
ISO file for Windows 10.
4. Select the version of Windows you want to install and go to the next step.
Note: WinToUSB Free Edition does not support Windows Professional and Enterprise editions.
(Use Windows 10 Home Edition for example)
iTANK MT1-B31BP User Manual
8
5. Select the USB external drive to install.
6. Select the version of the disk partition configuration according to your personal hardware
specifications, then execute "Yes" to proceed to the next step.
7. Follow the default and follow the next step.
Altri manuali per iTANK MT1-B31BP
1
Indice
Altri manuali Stardom Magazzinaggio
Stardom
Stardom SOHORAID DR8M-TB3 Manuale utente
Stardom
Stardom SOHORAID ST4-TB3 Manuale utente
Stardom
Stardom iTANK i310-BA31 Manuale utente
Stardom
Stardom Sohoraid SR4 Manuale utente
Stardom
Stardom ZR3MSB-B31 Manuale utente
Stardom
Stardom SOHORAID DR8-TB3 Manuale utente
Stardom
Stardom SOHORAID SR4-TB3 Manuale utente
Stardom
Stardom SA2TB2 Manuale utente
Stardom
Stardom SOHORAID DR8-TB2 Manuale utente
Stardom
Stardom SOHORAID DR5-WBS3 Manuale utente
Stardom
Stardom itank i310 Manuale utente
Stardom
Stardom SR2611 Series Manuale utente
Stardom
Stardom SA2TB3 Manuale utente
Stardom
Stardom SOHORAID ST2-TB3 Manuale utente
Stardom
Stardom SOHORAID MR2-B31 Manuale utente
Stardom
Stardom itank i310 Manuale utente
Stardom
Stardom SOHORAID SR4-SB3 Manuale utente
Stardom
Stardom SOHORAID MR2-B31BP Series Manuale utente
Stardom
Stardom ST5610-4S-WB Manuale utente
Stardom
Stardom SR2-B31 Manuale utente
