Stardom ST5610-4S-WB Manuale utente

SOHOTANK Series

ST5610-4S-WB

Quick Installation Guide

Version:1.0

Check Package Contents and Accessories................................................. 2

Hardware Introduction................................................................................... 2

Precautions prior to Installation.................................................................... 3

Hardware Installation Procedure................................................................... 4

Hard Disk Drive Format Procedure............................................................... 9

How to Use the Operating System to Set Up the RAID Type ..................... 14

Product Description....................................................................................... 18

Frequently Asked Questions......................................................................... 19

Index

1Index

Please check above parts are included prior to installation.The accessories bag contains screws and a plastic key.

Status Indications of LEDs:

ACCESS LED will light up blue if the HD is installed. ACCESS LED will always light up red if the HD is not installed.

HDD Access LED will flash Blue when data is accessed from the hard disk drive.

Power LED will light up blue if the power is on.

Fail LED will light up red when the internal temperature is higher than 60°C or the fan fails.

Check Package Contents and Accessories & Hardware Introduction

ST5610

Hardware Introduction

Removable Carrier Accessories bag

Power cable

1394b cable 1394a to 1394b cable

Item Quantity

ST5610 1

Removable Carrier 4

1394b cable 2

1394a to 1394b cable 2

Quick Installation Guide 1

Power cable 1

Accessories bag 1

(including 24 x 6#-32 screws and Key x 2)

ST5610 system includes the following:

Check Package Contents and Accessories

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

8cm Fan

1394b Port(1)

RAID/JBOD Button(2)

1394b Port(2)

RAID/JBOD Button(1)

HDD Access LED

Tray Handle

Fail LED

Power LED

Lock Hole

Power Socket

Power Switch

3Precautions prior to Installation

Precautions prior to Installation

1. Before installation, please refer to the Check Package Contents and Accessories and

ensure necessary parts are fully provided. Contact the original distributor in case of any

missing or damaged item.

2. Please use the power cord that comes with the package to connect the power supply. Do

not disassemble or modify the device without authorization. Be sure to use 100-240V,

60Hz, power supply. Any unauthorized disassembly or modification may cause damage to

the electronic parts and deprive you of the benefit under the warranty. STARDOM is not

liable and responsible for any damage due to unauthorized disassembly or modification, if

such unauthorized disassembly or modification results in data damage or loss, or causes

the operating system unable to start.

3. Please carefully go through the Quick Installation Guide and back up your data on the hard

disk drive before installation or use the newly purchased hard disk drive to avoid data loss

in case of inadvertent operation. STARDOM is not reliable and responsible for any data

damage due to inadvertent operation, if such inadvertent operation results in data damage

or loss, or causes the operating system unable to start.

4. Hardware Requirements

To enhance compatibility and transmission efficiency, please connect to motherboards

or external cards supporting 1394b or higher.

5. OS Software Requirements

The product is ideal for any operating system compatible with the 1394 interface

Hardware Installation Procedure

1. After verifying that the package is complete, proceed to unpack the package.

2. Hardware Installation.

A.Insert the supplied plastic key into the lock hole on the removable tray and carefully

remove the tray.

B.Remove the holder from the removable tray with a screwdriver (be careful not to

damage the nuts)

C.Mount the hard disk drive and fasten the screws.

Hardware Installation Procedure

5Hardware Installation Procedure

Ｄ.Carefully push the removable tray into the slot and push the handle back into place.

3. Use Mode and Connection Wiring Descriptions

Users must determine which mode to use prior to installation. Once the installation mode

is selected, please do not change the mode arbitrarily if possible. Especially when you

have already selected RAID 0 mode but change it to JBOD mode later or vice versa, it will

cause data damage in the HD.

A.Switch Adjustment Mode Illustrations:

With the machine powered off, you can adjust Switch by selecting any of the following

modes from the rear panel of the machine .

a. For 4 Hard Disk Drives Installed

Two JBOD modes, as 4 physical

hard disk drives Two RAID 0 modes, as 2 virtual

hard disk drives

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

JBOD

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

Hardware Installation Procedure 6

An RAID 0 mode and a JBOD mode, as 3 hard disk drives

b. For 2 Hard Disk Drives Installed

A JBOD mode, supporting 2 hard disk drives; or an RAID 0 mode, as 1 hard

disk drive

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

JBOD

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

JBOD

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

Hardware Installation Procedure

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

4. Connection Wiring Descriptions and Illustrations:

When the mode for Switch has been selected, you can then install the ST5610 with the

following connection wiring methods. It is recommended you use 1394b cables to connect

to the computer for better performance.

A. Connect two 1394b cables to the interfaces of the computer (most recommended

installation method).

B. Connect a 1394b cable to the interface of the computer and connect another 1394b

cable serially to the rear panel of the ST5610. (The method is recommended if there is

only a 1394b interface of your motherboard.)

Computer Back Panel

Hardware Installation Procedure 8

C. Connect a 1394b cable only to the interface of the computer.

D. Two ST5610 units serially connected each other

After selecting a desired installation method as stated above, first power of the ST5610, wait until the ST5610

operates normally, and then turn on your PC.

ST5610-4S-WB (1) ST5610-4S-WB (2) ST5610-4S-WB (3)

Up to 4 Units

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

1394b

Please ensure each

plug has connected

tightly before turn

on the power.

JBOD

Raid 0

Computer Back Panel

Hard Disk Drive Format Procedure

1. In the four individual Hard Disk Drives modes, the installed devices can be detected by the

Device Manager of the operating system.

A.Windows Operating System – 1394b Interface Connection – JBOD Mode

2. Customers can format the hard disk drive by using the Disk Management tool of the

operating system and then using the ST5610 normally.

A.Operating Instructions for Windows OS

Hard Disk Drive Format Procedure

Indice

Lingue:

Altri manuali Stardom Magazzinaggio

Stardom

Stardom SOHORAID SR4-B31A Manuale utente

Stardom

Stardom SOHORAID SR4-SB31+ Manuale utente

Stardom

Stardom SOHORAID ST2-TB3 Manuale utente

Stardom

Stardom SOHORAID ST4-TL3+ Manuale utente

Stardom

Stardom DR2-B31 Manuale utente

Stardom

Stardom iTANK MT1-B31BP Manuale utente

Stardom

Stardom SOHORAID SR4-TB3 Manuale utente

Stardom

Stardom iTANK i310-BA31 Manuale utente

Stardom

Stardom Raidon GT2660-TB3 Manuale utente

Stardom

Stardom SOHORAID DR2-TB3 Manuale utente

Stardom

Stardom SOHORAID MR2-B31BP Series Manuale utente

Stardom

Stardom SOHORAID ST2-TB3 Manuale utente

Stardom

Stardom SOHORAID ST4-TB3 Manuale utente

Stardom

Stardom SOHORAID SR4-SB3PLUS Manuale utente

Stardom

Stardom SOHORAID DR8M-TB3 Manuale utente

Stardom

Stardom SOHORAID SR4-SB31+ Manuale utente

Stardom

Stardom SOHORAID SR3MSB-B31 Manuale utente

Stardom

Stardom SOHORAID DR8-TB2 Manuale utente

Stardom

Stardom SOHORAID DR3-B31 Manuale utente

Stardom

Stardom SOHORAID SR8-TB3 Manuale utente

Stardom

Stardom SOHORAID ST2-B31+ Manuale utente

Stardom

Stardom SOHORAID DR8-TB3 Manuale utente

Stardom

Stardom SOHORAID DR2-B31 Manuale utente

Stardom

Stardom SafeTANK GT5640-B31 Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente