Stardom Raidon GT2660-TB3 Manuale utente
SafeTANK
User Manual
GT2660-TB3
» GT2660-TB3 User Manual .........................................1
1. Operating Information .......................................................1
2. Package Contents and Product Views ..............................1
3. Hardware Requirements and Precautions ........................2
4. Hardware Installation........................................................3
5. The Indication of M.2 access light .....................................5
6. Connect with other devices ...............................................5
7. Common Technical Questions...........................................6
8. Install The Operation System Into This Device .............7
» GT2660-TB3 產品使用說明 ......................................12
1. 環境需求 ............................................................................12
2. 產品外觀及包裝內容 ..........................................................12
3. 硬體需求與注意事項 ..........................................................13
4. 硬體安裝 ............................................................................14
5. M.2 讀取燈說明 .................................................................15
6. 與其他裝置連接說明 ..........................................................16
7. 常見問題 ............................................................................17
8. 外接磁碟安裝作業系統.......................................................18
SafeTANK GT2660-TB3 User Manual
V1.0
SafeTANK GT2660-TB3 User Manual
1
1. Operating Information
The Introduction
Thanks for purchasing Stardom product. This User Manual will introduce you the GT2660-TB3
Thunderbolt™storage product. Before using your GT2660-TB3, please read it thoroughly. Although
all information contented in this User manual had already been carefully veried before publishing,
however, the actual product and its specification will be based upon the time of delivery from
Stardom. Any update to the product or its relevant information may be listed on www.RAIDON.com.
tw . Product is subjected to change without prior notications.
If you have any question regarding to the product you purchased, or you would like to know the
latest product information, User Manual’s update, please contact to your local supplier or visit to
www.RAIDON.com.tw for further information.
Copyright © Raidon Technology, Inc. – All right is reserved.
Operating Temperature: 0 ～40 ℃(32 ～104 ℉)
Storage Temperature : -20 ～47℃(-4 ～116 ℉)
Line Voltage : 100 ～240V AC
» GT2660-TB3 User Manual
2. Package Contents and Product Views
Open the package and you shall nd the following parts：
GT2660-TB3
GT2660-TB3 Product Unit x1 (Removable Tray x2)
Thunderbolt™Cable x1
Power Cord x1
AC/DC Adapter x1
Quick Installation Guide x1
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the ofcial website (www.raidon.com.tw) to download drivers and other related resources.
SafeTANK GT2660-TB3 User Manual
2
Front and Rear Views
3. Hardware Requirements and Precautions
1. This system can only transfer data to one computer through one interface at a time.
2. The usable storage capacity of the M.2 after formatting will be less than the capacity indicated on
the M.2.
3. All existing data will be deleted when this product is set up for the rst time. Please ensure that all
data on the M.2 has been backed up before installation to avoid data loss.
4. If the MR2-TB3 needs to be shut down or disconnected, please ensure the MR2-TB3 is safely
removed through your operating system before turning off the power.
5. GT2660-TB3 uses a 12V/5V AC/DC Adapter. Please do not use other non-certied Power Adapter
to avoid damaging to your GT2660-TB3.
6. This product does not support the M.2 hot-swap function. If you need to remove the tray,
please do it with the main power switch off to avoid damage to software and hardware.
7. We strongly recommend backing up important data stored on the GT2660-TB3 to another storage
device or a remote site. RAIDON will not be held liable for the damage or loss of data you stored
on the GT2660-TB3.
A. M.2 access light
B. M.2 enclosure handle
C. M.2 tray ejection
D. Touch Power
Front View Rear View
IJ
E. Fan
F. Fan speed switch
G. Mini DisplayPort
H. Thunderbolt™ port
I. Main power switch
J. Power socket
SafeTANK GT2660-TB3 User Manual
3
4. Hardware Installation
Please follow the instructions below to complete the hardware installation.
2. Push the M.2 tray ejection to the right, and
the M.2 enclosure handle will pop open to
remove the removable tray.
1. Place the system on a stable surface. Ensure that the vent is not blocked and that it is installed in a
well-ventilated area. (Please keep the product away from moisture and other environment that might
be harmful to the product)
3. Remove the screws of the upper cover of
the tray, and then use the ejector pin to pry
open the upper cover and remove it.
4. Remove the screws holding the M.2 position. 5. Insert M.2 and lock the screws.
SafeTANK GT2660-TB3 User Manual
4
6. Remove the release paper from the heat
sink in the upper cover and replace the
upper cover.
7. Lock the screws.
8. When the M.2 installation has been completed, insert the tray into the system horizontally and
secure the latch into place.
9. Please connect the signal cable rst, and then power cord later.
10. First turn the power main switch on the back of the product to “I” to turn the power on, then
gently press the touch power on the front of the product until the power symbol “”lights up.
11. After turning on the power, please perform subsequent formatting settings through the operating
system. Please follow the instructions of the computer operating system for M.2 formatting; after
formatting, you can read and write data.
12. If you are not using the product for a while, you can put the product into shutdown mode: rst
press the touch power on the front of the product until the power symbol “”is off; if you want
to use the product, gently press the touch power on the front of the product until the power is
turned on. The symbol “ ” is illuminated.
13. If the product is not used for a long time, please turn off the product main power switch: rst
gently press the touch power on the front of the product until the power symbol “”is off, then
turn the main power switch on the back of the product to “O” to turn off the power.
14. If the computer is unable to detect the system, please install the drivers from ofcial website (www.
raidon.com.tw)
The product is in a state of near-complete power-off in shutdown mode, and the hard disk,
LCD, and fan are all out of operation, providing only a small portion of power for preparation
for subsequent startup.
★
SafeTANK GT2660-TB3 User Manual
5
5. The Indication of M.2 access light
6. Connect with other devices
1. TB port: Thunderbolt™3 ports can be connected to TB3, USB3.1 and Display port device. It is
downward to support USB3.0 / USB2.0. This product can connect with different USB devices by USB
Type C to Type A/B cable. It supports TB port power delivery (PD) function, which can provide 15W
(5V / 3A) power output to support 5V / 3A rechargeable notebook computer use. There is no additional
power supply need.
2. Mini Display port: congured with Mini Display Port connection port to provide additional screen output.
Two System Connections:
A. GT2660-TB3: Let its TB A port connect to Host (PC/Workstation/Server), TB B port to other
Device (USB or TB), and mDP (Mini Display) port to monitor.
Note:
Signal display will vary depending on the denition
of M.2 manufacturers.
Status M.2 access light
No M.2 OFF
Data access Blue light always on
M.2 idle Blue light always on
SafeTANK GT2660-TB3 User Manual
6
7. Common Technical Questions
1. When the GT2660-TB3 is powered on and Thunderbolt™ cable is not connected, the fan and M.2
readout light are both stopped and hibernated until Thunderbolt™ cable is connected to the computer.
2. When the computer is in sleep mode, the GT2660-TB3's fan and M.2 readout light are both
stopped and hibernated until woken up.
3. If the computer is unable to detect the system, please install the drivers from official website
(www.RAIDON.com.tw)
4. If the GT2660-TB3 is installed on the Windows OS but can not be connected, refer to the following
steps:
B. GT2660-TB3: Let its TB A port connect to Host (PC/Workstation/Server), TB B port to a
monitor, and mDP port to the second monitor.
D
RAIDON tech., GT2660-TB3
A. Open the Windows Taskbar.
B. right-click the Thunderbolt™icon.
C. Select "Approve Attached Devices".
D. Select the port to which the device is connected.
E. Wait for the dialog box "Approve Thunderbolt™™ Devices" to appear.
F. Select "Always Connect"
G. Press "OK"。
A
C
B
E
G
F
SafeTANK GT2660-TB3 User Manual
7
8. Install The Operation System Into This Device
1. Need to have network online capabilities. If a wireless network is available, you can choose it
from the Wi-Fi menu in the menu bar. This menu is also available in macOS Recovery.
2. Turn on your Mac and immediately press and hold Command ( ⌘)-R. Continue holding until you
see the Apple logo or a spinning globe. Startup is complete when you see the utilities window:
3. If you need to erase your disk before installing macOS, select Disk Utility from the Utilities window,
then click Continue. You probably don't need to erase, unless you're selling or giving away your
Mac or have an issue that requires you to erase.
Install macOS (Use macOS Mojave 10.14 for example)
SafeTANK GT2660-TB3 User Manual
8
4. Install macOS. Choose Reinstall macOS from the Utilities window, and click continue.
5. Follow the onscreen instructions, select agree to the software license agreement, and then select
the disk to start the installation.
6. Please allow installation to complete without putting your Mac to sleep or closing its lid. During
installation, your Mac might restart and show a progress bar several times, and the screen might
be empty for minutes at a time.
Indice
Altri manuali Stardom Magazzinaggio
Stardom
Stardom SA2TB2 Manuale utente
Stardom
Stardom SOHORAID DR2-B31 Manuale utente
Stardom
Stardom ST5610 Series Manuale utente
Stardom
Stardom SOHORAID SR2 Manuale utente
Stardom
Stardom ST4-B31 Manuale utente
Stardom
Stardom SOHORAID DR2-TB3 Manuale utente
Stardom
Stardom SOHORAID SR8-TB3 Manuale utente
Stardom
Stardom SOHORAID DR2-TB3 Manuale utente
Stardom
Stardom SOHORAID ST4-TB3 Manuale utente
Stardom
Stardom SOHORAID DR3-B31 Manuale utente
Stardom
Stardom iTANK i310-BA31 Manuale utente
Stardom
Stardom SR3610 Series Manuale utente
Stardom
Stardom SOHORAID ST2-B31+ Manuale utente
Stardom
Stardom SOHORAID DR8M-TB3 Manuale utente
Stardom
Stardom itank i310 Manuale utente
Stardom
Stardom SOHORAID SR4-SB31+ Manuale utente
Stardom
Stardom SA2TB3 Manuale utente
Stardom
Stardom SOHOTANK US2-B32 Manuale utente
Stardom
Stardom SOHORAID SR4-SB3 Manuale utente
Stardom
Stardom SOHORAID ST2-B31+ Manuale utente
