StarTech.com DKT30CSDHPD3 Manuale utente
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Use of Trademarks, Registered Trademarks, and other Protected Names
and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric
lines under power.
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit
et/ou les câbles électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでください。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le
linee elettriche sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller
elledningarna är strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
Make sure to assemble this product according to the instructions. Failure to do
so might result in personal injury or property damage.
Never use this product if parts are missing or damaged.
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................2
Warning Statements..............................................................................3
Product Diagram....................................................................................4
Top View ....................................................................................................................................................... 4
Side View...................................................................................................................................................... 4
Product Information..............................................................................5
Package Contents ..................................................................................................................................... 5
Requirements ............................................................................................................................................. 5
Powering the Multiport Adapter .........................................................6
USB Power Delivery 3.0 ........................................................................................................................... 6
USB Power Delivery 2.0 ........................................................................................................................... 6
Connecting the USB-C Power Adapter.............................................................................................. 6
Disconnecting the USB-C Power Adapter........................................................................................ 7
Connecting the Multiport Adapter .....................................................7
USB-A Ports ................................................................................................................................................. 7
HDMI Port................................................................................................8
RJ45 Port....................................................................................................................................................... 8
USB-A Port ................................................................................................................................................... 8
Inserting an SD Card ................................................................................................................................ 8
Removing an SD Card.............................................................................................................................. 9
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
LED Indicators.........................................................................................10
RJ45 Port....................................................................................................................................................... 10
Additional Information .........................................................................10
Installing the Driver.................................................................................................................................. 10
Conguring a Display.............................................................................................................................. 11
Display Preference .................................................................................................................................... 11
Troubleshooting.....................................................................................12
Reactivating an SD Card Autoplay/Autorun Function................................................................. 12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4
Product Diagram
Actual product may vary from photos
Top View
Side View
USB-C Port
(Power/Data) SD Card
Slot USB-A
Ports HDMI
Port
RJ45 Port
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5
Product Information
Package Contents
• Multiport Adapter x 1
• User Manual x 1
Requirements
For the latest requirements, please visit www.startech.com/DKT30CSDHPD3.
Host Computer:
• An available USB-C port (to ensure full adapter functionality, the Host
Computer USB-C port must support USB Power Delivery 3.0 and DP Alt
Mode). USB Power Delivery 2.0 is also supported on this adapter, see
limitations in Powering the Multiport Adapter section.
• (Optional) Video Card with DisplayPort 1.2 (required when using a 4K display)
Display:
Display requirements are optional and will depend on the port conguration of
the connected Host Computer.
• 4K capable display
• HDMI capable display
Cables:
Cable requirements are optional and will depend on the port conguration of
the connected Host Computer.
• USB-A Cable
• USB-C Cable
• HDMI Cable
• CAT5e/CAT6 Cable
Operating Systems:
• Windows 10 ®, 8, and 7
• macOS 10.13, 10.12, and 10.11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6
Powering the Multiport Adapter
USB Power Delivery 3.0
Fast Role Swap:
A Fast Role Swap function is available when using Power Delivery 3.0. This
function prevents USB data disruption when switching power sources (bus
power to USB-C power adapter or USB-C power adapter to bus power). For this
function to work, the Host Computer must also support Power Delivery 3.0.
Bus Power:
The Multiport Adapter is powered by the Host Computer’s USB-C port and does
not require a separate power adapter.
1. Connect the USB-C Host Connector on the Multiport Adapter to a USB-C
port on the Host Computer.
2. Depending on the Host Computer’s operating system, the Multiport
Adapter will automatically detect and install the required driver.
USB Power Delivery 2.0
If the Host Computer’s USB-C Port only supports USB Power Delivery 2.0, it will
still support Power Delivery pass-through, but it will not support Fast Role Swap.
If your Host Computer’s USB-C port does not support Power Delivery, then it will
not support Power Delivery pass-through.
Connecting the USB-C Power Adapter
The Multiport Adapter is powered using the Host Computer’s USB-C power
adapter.
The Multiport Adapter requires 12 W of Power Delivery to power the adapter
and its connected devices.
1. Connect the Multiport Adapter’s USB-C Connector to a USB-C port on the
Host Computer.
2. Connect the USB-C connector on the Host Computer’s power adapter to the
USB-C port on the Multiport Adapter.
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. The power adapter will power the Multiport Adapter and pass power
through to the Host Computer.
4. Depending on the Host Computer’s operating system, the Multiport
Adapter will automatically detect and install the required driver.
Disconnecting the USB-C Power Adapter
Warning (if the Host only supports Power Delivery 2.0): Before disconnect-
ing a USB-C power adapter from the Multiport Adapter, ensure all data
transfers are complete. If you disconnect the power adapter while transfer-
ring les to or from an attached storage device, the transfer will stop. This
may corrupt any les that you were attempting to transfer.
1. Complete all data transfers.
2. Disconnect the Multiport Adapter’s USB-C Connector from the Host
Computer.
3. Disconnect the USB-C Power Adapter from the Multiport Adapter.
4. Disconnect the HDMI device from the HDMI Port.
5. Eject the SD or Micro SD card(s).
6. Disconnect any USB peripherals.
Connecting the Multiport Adapter
USB-A Ports
The USB-A Ports can be used as charging ports (e.g. cell phone, laptop,
tablet, etc.), or to connect a USB storage device (e.g. Flash Drive) or other USB
peripheral device (e.g. Keyboard, Mouse, etc.).
1. Connect a USB-A Cable to a USB-A Port on the Multiport Adapter.
2. Connect the other end of the USB-A cable to a USB-A Port on your USB
device.
Note: The USB-A Port on the Multiport Adapter can fast-charge devices that
comply with USB Battery Charging Specication Revision 1.2.
Indice
Altri manuali StarTech.com Adattatore
StarTech.com
StarTech.com USB32DVIEH Manuale utente
StarTech.com
StarTech.com DKT30CHVSDPD Manuale utente
StarTech.com
StarTech.com USB2105S Manuale utente
StarTech.com
StarTech.com 8STCDP2VGASA Manuale utente
StarTech.com
StarTech.com ICUSB2321F Manuale utente
StarTech.com
StarTech.com SAT32MSATM Manuale utente
StarTech.com
StarTech.com USB2DVIE3 Manuale utente
StarTech.com
StarTech.com US2GA30 Manuale utente
StarTech.com
StarTech.com NOTECONS01 Manuale utente
StarTech.com
StarTech.com DKT31CHPDL Manuale utente
StarTech.com
StarTech.com USB31000SA Manuale utente
StarTech.com
StarTech.com EOC110K Manuale utente
StarTech.com
StarTech.com ICUSB232DB25 Manuale utente
StarTech.com
StarTech.com ST1000SPEXDP Manuale utente
StarTech.com
StarTech.com ICUSB232IS Manuale utente
StarTech.com
StarTech.com ICUSB2324852 Manuale utente
StarTech.com
StarTech.com ICUSB2322RJ Manuale utente
StarTech.com
StarTech.com USBBT1EDR2 Manuale utente
StarTech.com
StarTech.com USB32DPES Manuale utente
StarTech.com
StarTech.com 0065030875141 Manuale utente
