StarTech.com ST10000SPEX Manuale di istruzioni
Manual Revision: 05/20/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
ST10000SPEX
1 Port PCI Express 10GBase-T Ethernet
Network Card
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements.............................................................................................................................. 1
Installation .............................................................................................1
Hardware Installation .............................................................................................................................. 1
Driver Installation...................................................................................................................................... 2
Verifying Installation................................................................................................................................ 7
Technical Support ..................................................................................8
Warranty Information............................................................................8
Instruction Manual
1
Introduction
Packaging Contents
• 1x 1 Port PCI Express 10GBase-T Network Card
• 1x Low Prole Bracket
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• PCI Express enabled computer with an available PCI Express x4 slot
• Windows® 8.1 (32/64bit), 8 (32/64bit), 7 (32/64), Windows Server® 2012, `2008 R2,
Linux 2.6.24 and up (tested up to 3.5), VMware ESXi 5.1
Installation
Please visit www.startech.com/ST10000SPEX for full operating instructions and
specications.
Hardware Installation
WARNING! PCI Express cards, like all computer equipment, can be severely damaged
by static electricity. Be sure that you are properly grounded before opening your
computer case or touching your PCI Express card. StarTech.com recommends that you
wear an anti-static strap when installing any computer component. If an anti-static
strap is unavailable, discharge yourself of any static electricity build-up by touching a
large grounded metal surface (such as the computer case) for several seconds. Also be
careful to handle the PCI Express card by its edges and not the gold connectors.
1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,
external hard drives, etc.). Unplug the power cable from the rear of the power
supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. See documentation for your computer
system for details.
3. Locate an open PCI Express x4 slot and remove the metal cover plate on the rear of
the computer case (Refer to documentation for your computer system for details)
Note: This card will work in PCI Express slots of additional lanes (i.e. x8, or x16 slots).
Instruction Manual
2
4. Gently insert the card into the open PCI Express slot and fasten the bracket to the
rear of the case.
Note: If installing the card into a small form factor/low prole system, replacing the
pre-installed full prole bracket with the included low prole installation bracket
may be necessary.
5. Place the cover back onto the computer case.
6. Insert the power cable into the socket on the power supply and reconnect all other
connectors removed in Step 1.
Driver Installation
Windows
1. Upon starting Windows, if the Found New Hardware dialog appears on the screen,
cancel/close the window and insert the included Driver CD into the computer’s CD/
DVD drive.
2. From the main desktop or start menu, right-click on Computer then select Manage.
Windows 8.1 users can right click on the Start button and click Device Manager.
3. In the Computer Management Window, select Device Manager from the left window
panel.
4. Expand the Other Devices section, and right-click on the newly detected“Ethernet
Controller” device and select Update Driver Software, which will start the Update
Driver Software Wizard.
Instruction Manual
3
5. On the How do you want to search for driver software Window, click Browse my
computer for driver software, then Let me pick from a list of device drivers on
my computer.
Instruction Manual
4
6. From the next screen labeled Select your device’s type from the list below, select Show
All Devices (should be highlighted by default), and then click Next.
Note: This screen does not appear on all systems, move on to the next step if this
does not apply.
7. On the Select the Device Driver you want to install for this hardware screen, click the
Have Disk button.
8. Click Browse from the Install from Disk dialog box that pops up.
9. From the Locate File dialog window that opens, navigate to your CD/DVD Drive, and
open the ST10000SPEX folder location.
Note: If you have downloaded drivers from the www.startech.com website,
navigate to where you extracted the downloaded driver package.
10.Select the TN40xxmp_.inf le, and then click the Open button.
Instruction Manual
5
11.Click the OK button on the Install From Disk dialog box which will close the window.
12.Once back at the Select the Device Driver you want to install for this hardware screen,
click Next and then Close once the driver has installed.
Instruction Manual
6
13.At this point of the install, you may receive a message pop-up stating Windows can’t
verify the publisher of this driver software, click Install this driver software anyway.
Instruction Manual
7
Verifying Installation
Windows
1. From the main desktop or start menu, right-click on“Computer”then select
“Manage.”
2. In the Computer Management window, select Device Manager from the left
window panel. Windows 8.1 users can right click on the Start button and click
Device Manager.
3. Under the Network Adapters category should be a “Tehuti Networks 10GbE Adapter”
device. Right-click on the device and select Properties to make sure it is installed
and working correctly.
Indice
Altri manuali StarTech.com Scheda di rete
StarTech.com
StarTech.com ST20000SPEXI Manuale utente
StarTech.com
StarTech.com EC1000BT Manuale utente
StarTech.com
StarTech.com ST2000SPEXI Manuale utente
StarTech.com
StarTech.com P011GI-NETWORK-CARD Manuale utente
StarTech.com
StarTech.com EC1000S Manuale utente
StarTech.com
StarTech.com ST1000SPEX43 Manuale utente
StarTech.com
StarTech.com ST4000SPEXI Manuale utente
StarTech.com
StarTech.com ST1000SPEXD2 Manuale utente
StarTech.com
StarTech.com ST100S Manuale utente
StarTech.com
StarTech.com ST10000SPEXI Manuale utente
StarTech.com
StarTech.com PCIe 40G QSFP+ Manuale utente
StarTech.com
StarTech.com PEX1000MMSC2 Manuale utente
StarTech.com
StarTech.com ST1000SMPEX Manuale utente
StarTech.com
StarTech.com ST1000SPEXI Manuale utente
StarTech.com
StarTech.com PR12GIP-NETWORK-CARD Manuale utente
StarTech.com
StarTech.com USB300WN2X2C Manuale utente
StarTech.com
StarTech.com ST1000SPEX2 Manuale utente
StarTech.com
StarTech.com USB150WN1X1W Manuale utente
StarTech.com
StarTech.com ST1000SPEX2 Manuale utente
StarTech.com
StarTech.com PEXM2SAT3422 Manuale utente
Manuali Scheda di rete popolari di altre marche
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuale utente
National Instruments
National Instruments NI 9234 Manuale utente
Hama
Hama 49276 Manuale utente
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo
Compaq
Compaq Wireless LAN 100 Manuale utente
Bose
Bose PowerMatch Dante Manuale utente