StarTech.com PCI2S950 Manuale utente

Manual Revision: 02/01/2012

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

For the most up-to-date information, please visit: www.startech.com

PCI2S950

PCI4S950

PCI8S950

2/4/8 Port PCI RS232 Serial Card

with 16950 UART

*PCI2S950

*actual product may vary from photos

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to StarTech.com.

Where they occur these references are for illustrative purposes only and do not represent an

endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to

which this manual applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges

that all trademarks, registered trademarks, service marks, and other protected names and/or

symbols contained in this manual and related documents are the property of their respective

holders.

Instruction Manual i

Table of Contents

Introduction .......................................................................................................................................................1

Before You Begin..............................................................................................................................................1

System requirements..............................................................................................................................1

Contents.........................................................................................................................................................2

Installation............................................................................................................................................................2

Installing the Card.....................................................................................................................................2

Installing the Drivers ...............................................................................................................................3

Advanced Performance Conguration (PCI2S950 only).........................................................4

Specications.....................................................................................................................................................6

Technical Support...........................................................................................................................................7

Warranty Information....................................................................................................................................7

Instruction Manual 1

Introduction

Thank you for purchasing a StarTech.com 16950 PCI Serial card. The latest in Plug and Play

expansion cards, this high-speed serial card provides your computer with two, four, or eight

16C950 UART (Universal Asynchronous Receiver-Transmitter) RS-232 serial ports (varies by

model). You can connect any 9-pin external serial device such as a modem, mouse, or ISDN

adapter to your system and enjoy speeds of up to 15 Mbits/sec (asynchronous mode) or 60

Mbits/sec (isochronous) mode. This 32-bit, 33MHz PCI card is also backwards compatible with

UART versions to ensure compatibility with a wide range of serial peripherals.

Features

• Provides two/four/eight 16C950 UART RS-232 serial ports

• Buers up to 128 bytes for FIFO receiving/transmitting

• Fully adjustable IRQ trigger levels

• Automated ow-control to prevent UART overrun

• Backward compatible with 16C450, 16C550, 16C650, and 16C750 UARTs

• Complies with PCI Bus specication 2.2, Power Management 1.0, and Plug and Play

specications

• Backed by StarTech.com’s lifetime warranty

Before You Begin

To ensure a quick and easy card installation, please read through this section carefully before

attempting to install the card.

System Requirements

• An IBM PC running Windows 95/ 98SE/ ME/ 2000/ XP(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/

Server 2008 R2, and Linux

• An available PCI slot

• A CD-ROM or other compatible optical drive (for driver installation)

WARNING! PCI cards, like all computer equipment, can be severely damaged by static electricity.

Be sure that you are properly grounded before opening your computer case or touching your PCI

card. StarTech.com recommends that you wear an anti-static strap when installing any computer

component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-

up by touching a large grounded metal surface (such as the computer case) for several seconds.

Also be careful to handle the PCI card by its edges and not the gold connectors.

Instruction Manual 2

Packaging Contents

• 1 x PCI serial card

• 1 x Port “dongle”connector (PCI4S950 only)

• 2 x Port “dongles” + 1 ribbon cable panel (PCI8S950 only)

• 1 x Installation CD

• 1 x Instruction Manual

Installation

This section will guide you through the installation of your PCI card and the related software.

Please read through the instructions carefully and complete each step in the order listed.

Installing the Card

NOTE: Advanced computer users may wish to change the clock options on the card. Please see

“Advanced Performance Conguration” on page 4 before installing the card.

1. Make sure that your system is unplugged and you are grounded.

2. Remove the cover of your system (see your computer’s user manual for details, if necessary)

and gently turn your computer onto its side.

3. Locate an empty PCI slot (usually white in color) and remove the metal plate that covers the

rear bracket. You may need a Phillips screwdriver to perform this step. Retain this screw! You

will need it to secure the card later.

4. Gently insert the card into the empty slot, making sure it is rmly seated.

5. a) Secure the card in place using the screw you removed in Step 3.

b) If you purchased a PCI8S950 (8 port model), connect the ribbon cable panel for the second

dongle connector to the pins on the card, with the red stripe on the ribbon cable facing Pin 1

(as marked). Remove the screw and metal plate on another available slot. Secure the second

dongle connector in place with the screw.

c)If you purchased a PCI4S950 (4 port model) or PCI8S950 (8 port model), connect the port

dongle(s) provided to the port on the back of the card (and the additional dongle connector

you installed, if applicable).

6. Put your computer case back on.

Instruction Manual 3

Installing the Drivers

The current software drivers for this product are included on the provided installation CD. If

you lose the installation CD or want to update the existing drivers in future, please visit www.

startech.com to download the most current version of the drivers. For advanced conguration

instructions, consult the PDF les located in the doc folder on the installation CD. To view these

les, you will need Adobe Acrobat Reader which is available as a free download from www.

adobe.com.

Windows XP/2000

1. Windows will automatically detect the new hardware and start the Add New Hardware

Wizard. Click Next.

2. Insert the installation CD that came with the card into your computer’s CD-ROM or other

compatible optical drive. Choose Search for a suitable driver... (Windows 2000) or Install the

software automatically (Windows XP). Click Next.

3. You may receive a warning that the driver is not digitally signed. Choose OK (Windows 2000)

or Continue Anyway (Windows XP) when prompted to complete the installation.

4. When Windows is done copying les, you will see a message above the System Tray (next to

the clock) stating that the card is installed and ready to use. You may now attach your serial

devices.

Windows 95/98/98SE/ME

1. Windows will automatically detect the new hardware and start the Add New Hardware

Wizard. Click Next.

2. Choose Search for the best driver for my device and click Next.

3. Insert the installation CD that came with the card into your computer’s CD-ROM or other

compatible optical drive. Check CD-ROM from the list. Click Next.

4. The system will locate the appropriate driver. Click Next.

5. When the system is nished installing the driver, click Finish. Once the main driver for the

card is installed, the system will install the serial ports automatically.

Windows NT4

1. Insert the driver disk into the disk drive. Browse to the WinNT4 folder on the installation CD

and double-click on the Install_Ssr.exe le.

2. When the installation application starts, click Next to continue.

3. Ensure that Install is selected, then click Next.

4. Click OK to accept the license agreement. The system will install the drivers and the ports will

be ready for use.

Instruction Manual 4

Advanced Performance

Conguration (PCI2S950 only)

As an option, you can choose to congure the clock frequency of your card by setting the

JP15 jumper pins. You can alter this setting by placing the jumper on the pins according to the

following chart:

As a third option, you can choose to replace the 40.0 MHz oscillating (OSC) crystal with an OSC

crystal with a frequency that satises your needs.

WARNING: The following instructions are intended for advanced computer users only. If you are

not comfortable with or knowledgeable about internal computer parts, please do not attempt

to congure your card in this manner. Be sure to consult the charts on the following page before

adjusting your card.

1. Remove the plastic fastener from the OSC crystal (located immediately above and to the right

of JP15) and gently lift the crystal from the crystal socket.

2. Install the replacement OSC crystal according to the manufacturer’s instructions. If you attach

the crystal incorrectly you can damage it. Be sure to attach the crystal properly to avoid

damaging the card or other components.

3. You may need to adjust the FIFO and Crystal (or Data Rate) settings for the ports. Consult

your operating system’s documentation for more information.

Pins Setting

3-2 1.843 MHz

2-1 40.0 MHz (OSC)

Instruction Manual 5

Specications

Form Factor/Interface Full-size PCI, 32-bit

PCI standard ver. 2.2 compliant

Maximum Data Transfer Rate

15 Mbits/sec (asynchronous mode)

60 Mbits/sec (isochronous mode)

(Some speeds may require a dierent

clock crystal)

Connectors DB-9 RS-232 serial (male)

UART Chipset Oxford OX16PCI952 (PCI2S950)

Oxford OX16PCI954 (PCI4S950, PCI8S950)

Regulatory Certications FCC Class B, CE, UL

Instruction Manual 6

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide

industry-leading solutions. If you ever need help with your product, visit www.startech.com/

support and access our comprehensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a lifetime warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for

the periods noted, following the initial date of purchase. During this period, the products may

be returned for repair, or replacement with equivalent products at our discretion. The warranty

covers parts and labor costs only. StarTech.com does not warrant its products from defects or

damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,

directors, employees or agents) for any damages (whether direct or indirect, special, punitive,

incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If

such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Altri manuali per PCI2S950

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali StarTech.com Scheda PCI

StarTech.com

StarTech.com PEXSATA22I Manuale del sistema

StarTech.com

StarTech.com 8STPEX2S953LP Manuale utente

StarTech.com

StarTech.com PEX400USB2 Manuale utente

StarTech.com

StarTech.com 8STPEX2S1P553B Manuale utente

StarTech.com

StarTech.com PCI1S550 Manuale

StarTech.com

StarTech.com PEX1000MMSC Manuale utente

StarTech.com

StarTech.com PEX2S950 Manuale utente

StarTech.com

StarTech.com PEX2S952PW Manuale utente

StarTech.com

StarTech.com ST100SLP Manuale

StarTech.com

StarTech.com PCI1394B_3 Manuale utente

StarTech.com

StarTech.com PCI4S550N Manuale utente

StarTech.com

StarTech.com PEX2EC35 Manuale utente

StarTech.com

StarTech.com PEXUS313AC2V Manuale utente

StarTech.com

StarTech.com PEX4S550 Manuale utente

StarTech.com

StarTech.com 8STPEXUSB3S42V Manuale utente

StarTech.com

StarTech.com PEXUSB3S2 Manuale utente

StarTech.com

StarTech.com PEX2S553S Manuale utente

StarTech.com

StarTech.com PCIPOST Manuale utente

StarTech.com

StarTech.com DUAL-M2-PCIE-CARD-B Manuale utente

StarTech.com

StarTech.com PCISOUND5CH Manuale utente

StarTech.com

StarTech.com PEX4S950 Manuale utente

StarTech.com

StarTech.com PEX8S950LP Manuale utente

StarTech.com

StarTech.com PCI1P2 Manuale utente

StarTech.com

StarTech.com PEX1394A2V2 Manuale utente

Manuali Scheda PCI popolari di altre marche

ERMA

ERMA SSI 1417 Manuale utente

SIIG

SIIG CyberSerial Dual PCI Istruzioni per il montaggio

Moxa Technologies

Moxa Technologies CP-102E Manuale utente

I-Bus

I-Bus IBC2602 Manuale utente

Exsys

Exsys EX-60102 Manuale utente

Chelsio Communications

Chelsio Communications T5 Series Manuale utente

Conrad Electronic

Conrad Electronic 97 46 71 Manuale utente

Micro Innovations

Micro Innovations USB650A Manuale utente

KTI Networks

KTI Networks KF-310 Manuale utente

Asus

Asus SpaceLink WL230 Manuale utente

SIIG

SIIG SC2475 Manuale utente

TRENDnet

TRENDnet TEW-703PI Manuale utente

Belkin

Belkin F5D7000F Manuale utente

Pericom

Pericom PI7C7100 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-3548 Manuale utente

Digium

Digium TE200 Series Manuale utente

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuale utente

Western Digital

Western Digital FireWire PCI Adapter Manuale utente