StarTech.com PEXESATA2 Manuale utente
PCI Express eSATA
Controller Card
2 Port PCI Express eSATA
Controller Adapter Card
PEXESATA2
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and
do not represent an endorsement of a product or service by StarTech.com, or an en-
dorsement of the product(s) to which this manual applies by the third-party company in
question. Regardless of any direct acknowledgement elsewhere in the body of this doc-
ument, StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
i
Table of Contents
Introduction..................................................................... 1
Packaging Contents.....................................................................1
System Requirements .................................................................1
Installation....................................................................... 1
Hardware Installation...................................................................1
Driver Installation.........................................................................2
Verifying Successful Installation ..................................................3
Updating Driver Files...................................................................3
Specifications.................................................................. 5
Technical Support........................................................... 6
Warranty Information ...................................................... 6
1
Introduction
Packaging Contents
1 x PCI Express eSATA Card•
1 x Low profile bracket•
1 x Instruction Manual•
1 x Driver CD•
System Requirements
A CD/DVD-ROM drive (for driver installation)•
An eSATA drive to be connected to the host computer•
Microsoft Windows• ®2000, XP, Server 2003, Vista
Installation
Hardware Installation
Shut down the computer. As an added precaution, remove the power1.
cord from the back of the computer.
Open your computer case. In most designs, the case is opened by2.
removing two or three screws at the rear of the case and then sliding
the covering panel backward until it comes free. If your case is a
tower style, ensure that you remove the panel
that will expose the top of the computer’s motherboard. This is3.
generally the left-side panel; there are many different case designs,
however, so if you are unsure of how to open your particular case,
consult the user manual for your case or contact your local computer
store for help.
2
Remove the slot cover from the rear panel of the computer chassis4.
that corresponds with the designated PCI Express expansion slot.
Retain the screw (if applicable) used to hold the slot cover in place.
Align the PCI Express card with the designated slot. Applying
pressure evenly across the top edge of the expansion card, firmly
but gently insert the card into the slot, ensuring that the card is
properly aligned with the rear panel.
Secure the card to the motherboard and rear chassis, using the5.
previously removed screw.
Replace the chassis cover, and power on the computer.6.
Connect serial ATA cable(s) between the SATA port provided by7.
PEXESATA2 and the desired serial ATA device(s).
Power up the computer.8.
Driver Installation
Windows®2000, XP, Server 2003, Vista Fresh OS installation
The following instructions pertain to new installations of Windows®
2000/XP, Server 2003 or Vista, allowing you to boot from a device
attached to the SATA ports provided by PEXESATA2:
NOTE: Windows®2000/XP/Server 2003 can only load drivers from a
floppy disk. So the drivers from the CD must be copied to a floppy disk
prior to installation.
Insert the Windows1. ®2000/XP/Server 2003 or Vista installation CD
into the CD/DVD-ROM drive. Ensure that the computer is configured
to boot from the appropriate location, from the system BIOS.
2000/XP/Server 20032. : Once the boot sequence begins, press F6 for
third party SCSI or driver installation (at the beginning of text mode
installation). Press ‘S’ when setup asks if you want to specify an
additional device, and insert the floppy disk. Press ‘Enter’ and select
‘Silicon Image SiI 3132 SATALink Controller’.
Vista: When prompted to select a drive, Click the Load Drivers
button and then insert the Driver CD (included with PEXESATA2)
into the CD/DVD-ROM drive. Press ‘Enter’ and select ‘Silicon Image
SiI 3132 SATALink Controller’.
3
Follow the setup instructions to select your choice for partition and3.
file system.
After setup examines your disks, it will copy files from the CD to the4.
hard drive selected above and restart the system. After restart the
setup process will resume installation, until complete.
Adding PEXESATA2 to an Existing Windows®2000/XP/Server
2003/Vista installation
During OS boot up, Windows will display the ‘Found New Hardware1.
Wizard’. ‘Mass Storage controller’.
Select “Install from a list or specific location (Advanced)”, and click2.
“Next”, and make sure the Driver CD is in your CD/DVD-ROM drive.
Select “Search for the best driver in these locations”, and check3.
“Include this location in the search”, while ensuring that no other
checkmarks are present.
Type in E:\ (If your CD-ROM/DVD is E:\) then click “Browse”.4.
Specify the location of the driver file (example E:\SATA5.
Express_2Port \Sil3132 \ WinXP_2000_2003_NT), and click “Open”
then “OK”.
When the wizard indicates that it found a driver for the device click6.
‘Next’.
If the ‘Hardware Installation’ dialog appears, click ‘Continue Anyway’.7.
The wizard will now copy the required files to the system and start8.
the Driver. When the completion dialog appears, click ‘Finish’ to exit
the wizard.
4
Verifying Successful Installation
Windows®2000/XP/Server 2003/Vista
Right click on the ‘My Computer’ icon, select ‘Properties’, left click on1.
the ‘Hardware’ tab, and then on the ‘Device Manager’ button.
Double click on ‘SCSI and RAID Controllers’, If there is no yellow ! or2.
? in front of ‘Silicon Image SiI 3132 SATALink Controller’, the driver
is functioning correctly.
To view information about the devices attached to the controller, use3.
the SiICfg Utility and click on the device from the list.
Updating Driver Files
Windows®2000/XP/Server 2003/Vista
Right-click on ‘My Computer’ and select ‘Properties’. Under the1.
‘System Properties’ section, click on the ‘Hardware’ tab, and then on
‘Device Manager’. Click ‘SCSI and RAID Controllers’ and right click
‘Silicon Image SiI 3132 SATALink Controller’ then select ‘Properties’
from the context menu.
Click ‘Driver’ ,’Update Driver’ and select ‘Search for a suitable driver2.
for my device[Recommended]’. Insert the Driver CD in your CD-
ROM/DVD drive, and click ‘Next’ and complete the driver installation.
The system will go through the enumeration process and install the3.
driver. At the end of the process, click ‘Yes’ to reboot your system
when necessary.
5
Specications
Bus Interface PCI Express 1.1
(x1 slot connector)
Chipset ID Silicon Image SiI3132
Connectors 2 x eSATA
Maximum Data Transfer Rate 3.0 Gbps
Operating System Support Windows®2000/XP/Server 2003/
Vista
6
Technical Support
StarTech.com’s lifetime technical support is an integral part of our com-
mit-ment to provide industry-leading solutions. If you ever need help
with your product, visit www.startech.com/support and access our com-
prehensive selection of online tools, documentation, and downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The
warranty covers parts and labor costs only. StarTech.com does not war-
rant its products from defects or damages arising from misuse, abuse,
alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com
USA LLP (or their officers, directors, employees or agents) for any dam-
ages (whether direct or indirect, special, punitive, incidental, consequen-
tial, or otherwise), loss of profits, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price
paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limita-
tions or exclusions contained in this statement may not apply to you.
StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government, education
and industrial facilities to name just a few. We offer an unmatched
selection of computer parts, cables, A/V products, KVM and Serv-
er Management solutions, serving a worldwide market through our
locations in the United States, Canada, the United Kingdom and
Taiwan.
Visit www.startech.com today for complete information about all
our products and to access exclusive interactive tools such as the
Cable Finder, Parts Finder and the KVM Reference Guide.
Altri manuali per PEXESATA2
1
Indice
Altri manuali StarTech.com Scheda PCI
StarTech.com
StarTech.com PCI2S232485I Manuale utente
StarTech.com
StarTech.com PEX1TO16R Manuale utente
StarTech.com
StarTech.com PCIUSB3S2 Manuale utente
StarTech.com
StarTech.com PEXUSB311AC2 Manuale utente
StarTech.com
StarTech.com MPEX300WN2X2 Manuale del sistema
StarTech.com
StarTech.com PCI2S1P2 Manuale utente
StarTech.com
StarTech.com PEX1S1PMINI Manuale utente
StarTech.com
StarTech.com PCI330USB2 Manuale utente
StarTech.com
StarTech.com ST1000BT32 Manuale utente
StarTech.com
StarTech.com 6P6G-PCIE-SATA-CARD Manuale utente
StarTech.com
StarTech.com P021GI-NETWORK-CARD Manuale utente
StarTech.com
StarTech.com PEXUSB321C Manuale utente
StarTech.com
StarTech.com 8STPEXUSB3S25 Manuale utente
StarTech.com
StarTech.com 8STPEXUSB3S11 Manuale utente
StarTech.com
StarTech.com PEX400USB2 Manuale utente
StarTech.com
StarTech.com PCI2S650DVLP Manuale utente
StarTech.com
StarTech.com PEXHDCAP60L Manuale utente
StarTech.com
StarTech.com PEX1000MMSC Manuale del sistema
StarTech.com
StarTech.com PEX16S952LP Manuale utente
StarTech.com
StarTech.com PEXHDCAP2 Manuale utente
