Sun Microsystems SBA 1200 GB Manuale utente
SBA 1200 GB
SUN BRAKE ANALYSER
Operating Manual
HIGH TECH SECURES YOUR FUTURE
Operating Manual SBA 1200 GB
2
Operating Manual SBA 1200 GB
3
Operating Manual
SBA 1200 GB
SUN BRAKE ANALYSER
Copyright December 2009 Snap-on Equipment GmbH
All rights reserved
Part number: 2000618380 Rev: 3
Operating Manual SBA 1200 GB
4
Operating Manual SBA 1200 GB
5
DISCLAIMER OF WARRANTIES
AND LIMITATIONS OF LIABILITIES
Whilst the authors have taken due care in the preparation of this manual, nothing
contained herein:
modifies or alters in any way the standard terms and conditions of the purchase,
lease or rental agreement under the terms of which the equipment to which this
manual relates was acquired,
increases in any way the liability to the customer or to third parties.
TO THE READER
Whilst every effort has been made to ensure that the information contained in this
manual is correct, complete and up-to date, the right to change any part of this
document at any time without prior notice is reserved.
Before installing, maintaining or operating this unit,
please read this manual carefully, paying extra
attention to the safety warnings and precautions.
Snap-on Diagnostics
Unit 17 Denney Road
PE30 4HG Kings Lynn
Great Britain
Tel: +44 / (0) 1553-697296
Fax: +44 / (0) 1553-767992
Operating Manual SBA 1200 GB
6
Operating Manual SBA 1200 GB
7
Table of Contents
1. Introduction........................................................................................................... 8
1.1 About this Manual...................................................................................................... 8
1.2 Short Description of the SBA 1200 GB..................................................................... 8
2. Operational Safety and Accident Prevention..................................................... 9
3. Display Cabinet................................................................................................... 11
4. IR Remote Control (Option) ............................................................................... 13
5. Test procedure.................................................................................................... 16
5.1 Testing the front wheel.............................................................................................17
5.2 Testing the rear wheel...............................................................................................19
5.3 Delete function..........................................................................................................20
5.4 Enter a weight............................................................................................................21
5.5 Measuring ovality......................................................................................................21
5.6 Stopping a test ..........................................................................................................21
6. Pedal Force Transducers (Optional)................................................................. 22
7. Printout (Optional).............................................................................................. 23
8. Service-Routine .................................................................................................. 24
8.1 Calibration routine ....................................................................................................26
8.2 Clock setting..............................................................................................................29
Operating Manual SBA 1200 GB
8
1. Introduction
1.1 About this Manual
Congratulations for buying a Brake Tester SUN SBA 1200 GB.
In the present Operating Manual, you will find detailed information on the routine
work with your brake tester. SUN products speak for themselves by a steady ad-
vancement implying, however, that the Operating Manual may not always be up-
dated.
1.2 Short Description of the SBA 1200 GB
Brake Testers of the series SUN SBA 1200 GB allow easy and quick brake testing
for motorcycles. The test stand is particularly designed for the quick diagnosis in
workshops.
Easy operation connected with a quick test run allows time-saving and efficient brake
tests one after the other after a short training period. The standard version of the
brake tester SUN SBA 1200 GB is equipped with the following components:
roller set
display cabinet with electronic control system
The following options are additionally available:
printer
7-digit display
IR remote control
cable operated pedal force transducer, for hand and foot respectively
wireless pedal force transducer for hand and foot respectively
Operating Manual SBA 1200 GB
9
2. Operational Safety and Accident Prevention
Conscientiously follow the regulations in the Operating Manual in order to
avoid injury to persons and damage to the equipment.
Please mind that during the brake test no one is staying at close
range to the turning rollers.
If possible, secure the test stand area by means of railings and
colour markings on the floor or by danger signs with warning
lamps. CAUTION! BRAKE TEST!
The tester must remain seated on the vehicle during the test
prior to the testing procedure after having checked that no one is
close to the roller set!
If the Brake Tester is installed at the traffic zone of the workshop
or at an area accessible to the public, it is important that the test
stand is covered or equipped with railings if not in use.
Lock the main switch if the brake tester is not in use in order to ex-
clude any unallowable usage.
Safety regulations in operation:
-No adjustment work with turning rollers!
-No motor start via the test stand drive!
—No parking on roller brake testers, especially neither with the drive axle, nor with
engaged gear or with turned-on ignition since the engine of the vehicle could start
up on initiating the rollers thus risking that the driverless vehicle gets out of con-
trol.
—The „emergency operation mode“ (key-operated switch) should only be applied
in order to be able to drive a vehicle off the roller set in case of any test stand op-
erating failure.
—Withdraw the key for emergency operation from the display cabinet and put it in
safekeeping to prevent any unauthorized use.
—On actuating the „automatic operation mode“, the rollers start up as soon as a
vehicle is driven onto the test stand. For this reason, the driver should take the IR
transmitter with him to be able to switch the test stand off in case of emergency.
test stand
in
operation
Operating Manual SBA 1200 GB
10
The Brake Tester may only be operated within the rated power and the maximum
speed stated in the Technical Data Sheet. Shift period for the rated power is 20%
meaning a two minutes´ operating time is followed by a rest period of 8 minutes.
Slowly drive the vehicle onto the test stand thus avoiding unnecessary strain to
both the vehicle and the test stand.
From time to time check the fastening screws of the cover plates
on their tight fit in order to avoid any tyre damage when driving
onto and off the test stand.
The access to electrical control devices, such as the exchange of
safety fuses not controllable from outside, is only allowed to
skilled workers.
Prior to opening the switch cabinet, disconnect the system from
the mains supply.
Keep dry all parts of the electric system!
Check the safety devices of the brake tester, in particular the
initiators and safety rollers, in regular intervals on their perfect
functioning. Step-in safety devices between the test rollers are
obligatory.
Indice
Altri manuali Sun Microsystems Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
