Supermicro H8DGU Manuale utente
USER’S MANUAL
Revision 1.3
®
SUPER
H8DGU
H8DGU-F
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall be
the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims
will not exceed the price paid for the hardware product.
FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.3
Release Date: March 06, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
iii
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
H8DGU(-F) serverboards.
The H8DGU(-F) serverboard is based on the AMD® SR5670/SP5100 chipset and
supports four AMD Socket G34 type processors with up to 128 GB of ECC/Non-
ECC Unbuffered or 512 GB of ECC Registered DIMM DDR3-1600/1333/1066 Mhz
SDRAM. The H8DGU serverboard does not have IPMI capability, whereas the
H8DGU-F serverboard does.
Please refer to the motherboard specifications pages on our web site for updates on
supported processors (http://www.supermicro.com/aplus/). This product is intended
to be professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your motherboard
box, describes the features, specifications and performance of the motherboard
and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read this
chapter when installing the processor(s) and memory modules and when installing
the motherboard in a chassis. Also refer to this chapter to connect the hard disk
drives, the various ports, and the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3, which describes troubleshooting
procedures for the video, the memory and the setup configuration stored in CMOS.
For quick reference, a general FAQ (Frequently Asked Questions) section is
provided. Instructions are also included for contacting technical support. In addition,
you can visit our web site for more detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Code Messages.
Appendix B lists BIOS POST Checkpoint Codes.
iv
Table of Contents
Chapter 1 Introduction
1-1 Overview .........................................................................................................1-1
Checklist..........................................................................................................1-1
1-2 Contacting Supermicro....................................................................................1-2
H8DGU(-F) Quick Reference..........................................................................1-5
1-3 Serverboard Features..................................................................................... 1-6
1-4 Chipset Overview............................................................................................1-9
AMD SR5670/SP5100 Chipset.......................................................................1-9
HyperTransport Technology............................................................................ 1-9
1-5 PC Health Monitoring...................................................................................... 1-9
1-6 Power Configuration Settings........................................................................1-10
1-7 Power Supply.................................................................................................1-11
1-8 Super I/O........................................................................................................1-11
1-9 UIO................................................................................................................ 1-12
Chapter 2 Installation
2-1 About Standardized Warning Statements.......................................................2-1
2-2 Static-Sensitive Devices..................................................................................2-4
Precautions .....................................................................................................2-4
Unpacking .......................................................................................................2-4
2-3 Processor and Heatsink Installation................................................................2-5
2-4 Mounting the Serverboard into a Chassis ......................................................2-7
2-5 Installing Memory............................................................................................2-7
DIMM Module Population Configuration .................................................... 2-9
2-6 PCI Expansion Cards.................................................................................... 2-10
2-7 I/O Port and Control Panel Connections .......................................................2-11
Front Control Panel........................................................................................2-11
2-8 Connector Definitions.................................................................................... 2-12
Power Connectors.................................................................................... 2-12
Power Connector......................................................................................2-12
Reset Connector ...................................................................................... 2-13
Power Fail LED........................................................................................2-13
Overheat (OH)/Fan Fail/PWR Fail/UID LED............................................ 2-13
NIC2 (Link/Activity) LED...........................................................................2-13
NIC1 (Link/Activity) LED...........................................................................2-13
HDD LED.................................................................................................. 2-14
Power LED Connector ............................................................................. 2-14
Table of Contents
v
NMI Button ............................................................................................... 2-14
Universal Serial Bus Ports....................................................................... 2-14
USB Headers ........................................................................................... 2-14
Fan Headers............................................................................................. 2-15
Serial Ports...............................................................................................2-15
IPMB.........................................................................................................2-15
Unit Identifier Button................................................................................. 2-15
Trusted Platform Module Header.............................................................2-16
T-SGPIO...................................................................................................2-16
Video Connector....................................................................................... 2-16
Power LED/Speaker................................................................................. 2-17
ATX PS/2 Keyboard and PS/2 Mouse Ports............................................2-17
Compact Flash Card PWR Connector..................................................... 2-17
LAN1/2 (Ethernet Ports)........................................................................... 2-18
Chassis Intrusion ..................................................................................... 2-18
Overheat LED........................................................................................... 2-18
UIO Power Connector.............................................................................. 2-19
2-9 Jumper Settings............................................................................................2-20
Explanation of Jumpers ................................................................................ 2-20
CMOS Clear............................................................................................. 2-20
I2C to PCI-Express Slot........................................................................... 2-21
Watch Dog Enable/Disable ...................................................................... 2-21
LAN1/2 Enable/Disable ........................................................................... 2-21
VGA Enable/Disable................................................................................. 2-21
2-10 Onboard Indicators........................................................................................2-22
GLAN LEDs.............................................................................................. 2-22
IPMI Dedicated LAN LEDs....................................................................... 2-22
BMC Heartbeat LED ................................................................................ 2-22
Power LED...............................................................................................2-23
UID LED (LE1) ........................................................................................ 2-23
2-11 SATA Drive Connections............................................................................... 2-23
SATA Ports ............................................................................................... 2-23
2-12 Enabling SATA RAID.....................................................................................2-24
Serial ATA (SATA)..........................................................................................2-24
Installing the OS/SATA Driver....................................................................... 2-24
Building a Driver Diskette.........................................................................2-24
Enabling SATA RAID in the BIOS.................................................................2-25
2-13 Installing Drivers............................................................................................ 2-27
H8DGU(-F) SERVERBOARD USER'S MANUAL
Table of Contents
vi
Using the DotHill and Adaptec RAID Utility.................................................. 2-28
Installing the RAID Driver During OS Installation......................................... 2-28
Supero Doctor III........................................................................................... 2-29
2-14 Serverboard Battery...................................................................................... 2-31
Chapter 3 Troubleshooting
3-1 Troubleshooting Procedures...........................................................................3-1
Before Power On ............................................................................................3-1
No Power ........................................................................................................ 3-1
No Video .........................................................................................................3-2
Memory Errors ...............................................................................................3-2
Losing the System’s Setup Configuration.......................................................3-2
3-2 Technical Support Procedures........................................................................ 3-2
3-3 Frequently Asked Questions...........................................................................3-3
3-4 Returning Merchandise for Service.................................................................3-4
Chapter 4 BIOS
4-1 Introduction...................................................................................................... 4-1
4-2 Main Menu ...................................................................................................... 4-2
4-3 Advanced Settings Menu................................................................................ 4-2
4-3 Security Menu...............................................................................................4-16
4-4 Boot Menu..................................................................................................... 4-17
4-5 Exit Menu...................................................................................................... 4-18
Appendix A BIOS Error Beep Codes
Appendix B BIOS POST Checkpoint Codes
B-1 Uncompressed Initialization Codes.................................................................B-1
B-2 Bootblock Recovery Codes.............................................................................B-2
B-3 Uncompressed Initialization Codes.................................................................B-3
Chapter 1: Introduction
1-1
Chapter 1
Introduction
1-1 Overview
Checklist
Congratulations on purchasing your computer motherboard from an acknowledged
leader in the industry. Supermicro boards are designed with the utmost attention to
detail to provide you with the highest standards in quality and performance.
Please check that the following items have all been included with your motherboard.
If anything listed here is damaged or missing, contact your retailer.
• One (1) H8DGU(-F) serverboard
• Six (6) 2ft. Amphenol, SATA cable (CBL-0044L)
• Two (2) Retention brackets (BKT-0035L)
• One (1) CD containing drivers and utilities
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your motherboard.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety information:
http://super-dev/about/policies/safety_information.cfm
• If you have any questions, please contact our support team at:
support@supermicor.com
1-2
H8DGU(-F) Serverboard User’s Manual
1-2 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Web Site: www.supermicro.com
Asia-Pacific
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Tel: +886-(2)-8226-3990
Web Site: www.supermicro.com.tw
Chapter 1: Introduction
1-3
Figure 1-1. H8DGU-F Image
1-4
H8DGU(-F) Serverboard User’s Manual
Notes:
Jumpers not indicated are for test purposes only.
Not all ports, jumpers or LED Indicators are available on all serverboards.
Figure 1-2. H8DGU-F Serverboard Layout
(not drawn to scale)
JD1
JPW1
JF1
JI2C1
JI2C2
JOH1
JL1
JWF1
JPL1
JWD
JPG1
FAN3
FAN8
FAN2
FAN1
FAN7
FAN4
FAN5
FAN6
LE1
UIOP
JPW2 JPW3
IPMB
JPI2C
DP2
BATTERY
SATA5
SATA0
SATA1
SATA2
SATA3
SATA4
T-SGPIO2
T-SGPIO1
UID
P1-DIMM4A
P2-DIMM1B
P1-DIMM4B
P2-DIMM1A
USB0/1
USB6
USB4/5 USB2/3
P1-DIMM3A
P2-DIMM2B
P1-DIMM3B
P2-DIMM2A
P1-DIMM2A
P2-DIMM3B
COM1
IPMI_LAN
PCI-E 2.0 x8 in x4 SLOT
P1-DIMM2B
P2-DIMM3A
KB/MOUSE
LAN2
LAN1
P1-DIMM1A
COM2
P1-DIMM1B
P2-DIMM4A
CPU1
CPU2
VGA
JBT1
PCI-E 2.0 x16 SLOT
Winbond
BMC
AMD
SR5670
AMD
SP5100
P2-DIMM4B
JTPM1
DP1
Altri manuali per H8DGU
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Supermicro Scheda madre
Supermicro
Supermicro X8DTN+ Manuale utente
Supermicro
Supermicro A1SAM Series Manuale utente
Supermicro
Supermicro X7DWT Manuale utente
Supermicro
Supermicro X10SAE Manuale utente
Supermicro
Supermicro X12SDV-4C-SPT4F Manuale utente
Supermicro
Supermicro SUPER P6DGH Manuale utente
Supermicro
Supermicro X6DHR-8G2 Manuale utente
Supermicro
Supermicro H11SSL-I Manuale utente
Supermicro
Supermicro SUPER P4SS8 Manuale utente
Supermicro
Supermicro Supero X8DTH-6F Manuale utente
Supermicro
Supermicro X10SRD-F Manuale utente
Supermicro
Supermicro X9DR3-F Manuale utente
Supermicro
Supermicro C7Z270-CG-L Manuale utente
Supermicro
Supermicro P3TDLR Plus Manuale utente
Supermicro
Supermicro PDSMi Plus Manuale utente
Supermicro
Supermicro H11DSU-iN Manuale utente
Supermicro
Supermicro A1SAi-2750F Manuale utente
Supermicro
Supermicro H8DMT Manuale utente
Supermicro
Supermicro Supero X8DTH-6 Manuale utente
Supermicro
Supermicro X6DAL-G Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
