Supero SAS 808TQ Manuale utente

Rev. 1.0

SAS 808TQ BACKPLANE

USER'S GUIDE

JP10

JP13

GNDGND+12V +5V

REV 1.0

SAS808

#3 #2 #1 #0

SAS 808TQ BackplaneUser's Guide

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of

this manual, please see our web site at www.supermicro.com.

SUPERMICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

Manual Revision 1.0

Release Date: April 12, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy or otherwise reproduce/distribute any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Safety Information and Technical Speciﬁcations

Table of Contents

SAS 808TQ BACKPLANE USER'S GUIDE

Contacting SuperMicro..................................................................................................iv

Chapter 1: Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-1

Chapter 2: Jumper Settings and Pin Deﬁnitions

2-1 Front Connectors and Jumpers ...................................................................... 2-1

Front Connectors ............................................................................................ 2-1

2-2 Front Connector and Pin Deﬁnitions............................................................... 2-2

2-3 Front Jumper Locations and Pin Deﬁnitions................................................... 2-3

Explanation of Jumpers.............................................................................. 2-3

FRONT LED INDICATORS ........................................................................ 2-4

Front Pane LEDs........................................................................................ 2-4

2-4 Rear Connectors and LED Indicators ............................................................. 2-5

Rear SAS/SATA Connectors ...................................................................... 2-5

Rear LED Indicators................................................................................... 2-5

SAS 808TQ BackplaneUser's Guide

ContactingSuperMicro

Headquarters

Address: SuperMicro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: marketing@supermicro.com (General Information)

support@supermicro.com (Technical Support)

Web Site: www.supermicro.com

Europe

Address: SuperMicro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: sales@supermicro.nl (General Information)

support@supermicro.nl (Technical Support)

rma@supermicro.nl (Customer Support)

Asia-Paciﬁc

Address: SuperMicro, Tai wan

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Tai pei County

Tai wan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email:support@supermicro.com.tw

Tel: 886-2-8228-1366,ext.132 or 139

1-1

Safety Information and Technical Speciﬁcations

Chapter 1:

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD SafetyGuidelines

Electric Static Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufﬁcient to protect your equipment from ESD.

• Use a grounded wrist strap designed to prevent static discharge.

• Tou ch a grounded metal object before removing a component from the antistatic

bag.

• Handle the RAID card by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

• When handling chips or modules, avoid touching their pins.

• Put the card and peripherals back into their antistatic bags when not in use.

1-2 General SafetyGuidelines

• Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

• Disconnect the power cable before installing or removing any cables from the

backplane.

• Make sure that the backplane is securely and properly installed on the mother-

board to prevent damage to the system due to power shortage.

1-3 AnImportant Note to Users

• All images and layouts shown in this user's guide are based upon the latest

PCBRevision available at the time of publishing. The card you have received

may or may not look exactly the same as the graphics shown in this manual.

1-2

SAS 808TQ BackplaneUser's Guide

Notes

2-1

Safety Information and Technical Speciﬁcations

Front Connectors

Chapter 2:

Jumper Settings and Pin Deﬁnitions

2-1 Front Connectors and Jumpers

1. Power Connectors (4-pin) JP10 and JP13

2. SAS Port #0 J5

3. SAS Port #1 J6

4. SAS Port #2 J7

5. SAS Port #3 J8

JP10

JP13

GNDGND+12V +5V

REV 1.0

SAS808

#3 #2 #1 #0

2-2

SAS 808TQ BackplaneUser's Guide

2-2 Front Connector and Pin Deﬁnitions

Backplane

Main Power

4-Pin Connector

(JP10 and JP13)

Pin# Deﬁnition

1 +12V

2 and 3 Ground

4 +5V

1. Backplane Main Power Connectors

The 4-pin connectors, designated JP10 and

JP13, provide power to the backplane. See

the table on the right for pin deﬁnitions.

2. - 5. SAS Ports

The SAS ports are used to connect the SAS

drive cables. The four ports are designated

#0 - #4. Each port is also compatible with

SATA drives.

2-3

Safety Information and Technical Speciﬁcations

2-3 Front Jumper Locations and Pin Deﬁnitions

Explanation of Jumpers

To modify the operation of the backplane,

jumpers can be used to choose between

optional settings. Jumpers create shorts

between two pins to change the function

of the connector. Pin 1 is identiﬁed with

a square solder pad on the printed circuit

board. Note: On two pin jumpers, "Closed"

means the jumper is on and "Open" means

the jumper is off the pins.

Connector

Pins

Jumper

Setting

3 2 1

Jumper Settings

Jumper Jumper Settings Note

JP18 Open: Enabled

Closed: Disabled

Buzzer Reset

JP25

Open: 45 C

1-2: 50 C

2-3: 55 C

Overheat temperature

JP18

JP10

JP13

GNDGND+12V +5V

REV 1.0

SAS808

#3 #2 #1 #0

JP13

GNDGND+12V +5V

JP25

2-4

SAS 808TQ BackplaneUser's Guide

JP10

JP13

GNDGND+12V +5V

REV 1.0

SAS808

#3 #2 #1 #0

JP13

GNDGND+12V +5V

Front Pane LEDs

LED STATE SPECIFICATION

D3 ON Overheat/Fan Failure LED Indicator

(Red light: ﬂashing, Buzzer: On)

FRONT LED INDICATORS

Indice

Altri manuali Supero Hardware per computer

Supero

Supero Supero BPN-SAS-823TQ Manuale utente

Supero

Supero AOC-USAS-S4ir Manuale utente

Supero

Supero X10DGO-T Manuale utente

Supero

Supero Supero SMT IPMI Manuale utente

Supero

Supero CSE-SATA-813L Manuale utente

Supero

Supero AOC-CGP-i2 Manuale utente

Supero

Supero AOC-SIM1U Add-on Card Manuale utente

Supero

Supero BPN-SAS3-217HD Backplane Manuale utente

Supero

Supero AOC-SIMLC Manuale utente

Supero

Supero Supero SAS2-847EL BACKPLANE Manuale utente

Supero

Supero SAS 822TQ BACKPLANE Manuale utente

Supero

Supero SAS 828TQ BACKPLANE Manuale utente

Supero

Supero Supero SAS-825TQ Manuale utente

Supero

Supero AOC-UG-i4 Manuale utente

Supero

Supero Supero SAS-846A Manuale utente

Supero

Supero AOC-SIM1U Add-on Card Manuale utente

Supero

Supero SAS-216EL1/EL2 Manuale utente

Supero

Supero Supero BPN-SATA-933 BACKPLANE Manuale utente

Supero

Supero SAS2-836EL Manuale utente

Supero

Supero BPN-SAS2-216EL1 Manuale utente

Supero

Supero AOC-CIBQ-M1 Manuale utente

Supero

Supero Supero SAS-836TQ Manuale utente

Supero

Supero BPN-SAS2-847DR Backplane Manuale utente

Supero

Supero Supero SAS-826A Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente