Supero SAS-747TQ BACKPLANE Manuale utente

Rev. 1.0

SAS-747TQ BACKPLANE

USER'S GUIDE

DESIGNED IN USA

JP18

J16

J14

J12

J10

BZ1

JP65

JP60

JP56

JP13

1 4

JP10

1 4

R99

R324

R154

R325

D47

D45

D54

D53

D51

U18

U42

RP1

RP3

JP69

U67

JP95

JP37

D58

JP64

JP61

JP62

JP63

1JP84

JP97

JP98

JP99

3 1

JP25

3 1

JP35

C64

C135

C99

C107

C89

C124

C121

C202

C119

C201

C203

C44

C45

49 64

U19

JP68

JP66

JP26

GND

1.00

SAS747TQ

REV:

JP64:FAN#4SELEC T

FAN#2FAIL

FAN#1FAIL

FAN#3FAIL

D3:ALARM

FAN#4

2-3:I2C

1-2:SGPIO

JP84:MODE

FAN#1

2-3: NO RST

1-2: RST

JP35:9072 RST

D54:+12V

D53:+5V

JP18:BUZZER RESET

2-3:NO FAN

1-2:WITH FAN

JP63:FAN#3SELEC T

JP62:FAN#2SELEC T

JP61:FAN#1SELEC T

FAN#3

#1 #0

#3 #2

#5 #4

+5V

GND

+12V +5V

GND

+12V GND

ACT4

ACT3

ACT2

ACT1

ACT7

ACT6

ACT5

ACT0

2-3:55

1-2:50

OPEN:45

JP25:OH TEMP.

JP97:FAN#1 SELECT

JP98:FAN#2 SELECT

JP99:FAN#3 SELECT 2-3:NO FAN

1-2:WITH FAN

FAN#2

UPGRADE

SIDEBAND#2

I2C#2 I2C#1

SIDEBAND#1

SUPER ®

SAS-747TQ Backplane User's Guide

Manual Revision 1.0

Release Date: July 24, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

Table of Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Chapter 1 Safety Guidelines ...................................................................................... 1-1

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

1-4 Introduction to the SAS-747TQ Backplane..................................................... 1-2

Chapter 2 Jumper Settings and Pin Denitions......................................................... 2-1

2-1 Front Connectors and Jumpers ...................................................................... 2-1

Front Components .......................................................................................... 2-1

2-2 Front Connector and Pin Denitions............................................................... 2-2

2-3 Front Jumper Locations and Pin Denitions................................................... 2-4

Fan Jumper Settings....................................................................................... 2-5

I2C and SGPIO Modes and Jumper Settings ................................................. 2-6

2-4 Front LED Indicators ....................................................................................... 2-7

2-5 Rear Connectors and LED Indicators............................................................. 2-8

SAS-747TQ Backplane User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacic

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8226-1900

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

SAS-747TQ Backplane User's Guide

Notes

1-1

Chapter 1: Safety Guidelines

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufcient to protect your equipment from ESD.

Use a grounded wrist strap designed to prevent static discharge.•

Touch a grounded metal object before removing a component from the antistatic•

bag.

Handle the backplane by its edges only; do not touch its components, peripheral•

chips, memory modules or gold contacts.

When handling chips or modules, avoid touching their pins.•

Put the card and peripherals back into their antistatic bags when not in use.•

1-2 General Safety Guidelines

Always disconnect power cables before installing or removing any components•

from the computer, including the backplane.

Disconnect the power cable before installing or removing any cables from the•

backplane.

Make sure that the backplane is securely and properly installed on the mother-•

board to prevent damage to the system due to power shortage.

1-2

SAS-747TQ Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest•

revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

1-4 Introduction to the SAS-747TQ Backplane

The SAS-747TQ backplane has been designed to utilize the most up-to-date tech-

nology available, providing your system with reliable, high-quality performance.

This manual reects SAS-747TQ Revision 1.00, the most current release available

at the time of publication. Always refer to the Supermicro Web site at www.supermi-

cro.com for the latest updates, compatible parts and supported congurations.

2-1

Chapter 2: Jumper Settings and Pin Denitions

DESIGNED IN USA

JP18

J16

J14

J12

J10

BZ1

JP65

JP60

JP56

JP13

1 4

JP10

1 4

R99

R324

R154

R325

D47

D45

D54

D53

D51

U18

U42

RP1

RP3

JP69

U67

JP95

JP37

D58

JP64

JP61

JP62

JP63

1JP84

JP97

JP98

JP99

3 1

JP25

3 1

JP35

C64

C135

C99

C107

C89

C124

C121

C202

C119

C201

C203

C44

C45

49 64

U19

JP68

JP66

JP26

GND

1.00

SAS747TQ

REV:

JP64:FAN#4SELEC T

FAN#2FAIL

FAN#1FAIL

FAN#3FAIL

D3:ALARM

FAN#4

2-3:I2C

1-2:SGPIO

JP84:MODE

FAN#1

2-3: NO RST

1-2: RST

JP35:9072 RST

D54:+12V

D53:+5V

JP18:BUZZER RESET

2-3:NO FAN

1-2:WITH FAN

JP63:FAN#3SELEC T

JP62:FAN#2SELEC T

JP61:FAN#1SELEC T

FAN#3

#1 #0

#3 #2

#5 #4

+5V

GND

+12V +5V

GND

+12V GND

ACT4

ACT3

ACT2

ACT1

ACT7

ACT6

ACT5

ACT0

2-3:55

1-2:50

OPEN:45

JP25:OH TEMP.

JP97:FAN#1 SELECT

JP98:FAN#2 SELECT

JP99:FAN#3 SELECT 2-3:NO FAN

1-2:WITH FAN

FAN#2

UPGRADE

SIDEBAND#2

I2C#2 I2C#1

SIDEBAND#1

Chapter 2

Jumper Settings and Pin Denitions

2-1 Front Connectors and Jumpers

Front Components

Front Jumpers and Components

Upgrade Connector: JP691.

I2. 2C Connector#1: JP37 and I2C

Connector#2 JP95

Sideband Connector#1: JP66 and3.

Sideband Connector#2: JP68

Chip: MG90724.

Power Connectors: (4-pin): JP105.

and JP13

Fan Connectors: JP54, JP56, and6.

JP60

ACT_IN #0-7: JP267.

SAS Port #0: J58.

Figure 2-1: Front Components

15 1

SAS Port #1: J69.

SAS Port #2: J710.

SAS Port #3: J811.

SAS Port #4: J1012.

SAS Port #5: J1213.

SAS Port #6: J1414.

SAS Port #7: J1615.

Buzzer: BZ116.

2-2

SAS-747TQ Backplane User's Guide

2-2 Front Connector and Pin Denitions

4. MG9072 Chip

The MG9072 is an enclosure management

chip that supports the SES-2 controller and

SES-2 protocols.

2. I2C Connectors

The I2C connectors, designated JP37 and

JP95, are used to monitor HDD activity and

status. See the table on the right for pin de-

nitions.

I2C Connector

Pin Denitions

Pin# Denition

1 Data

2 Ground

3 Clock

4 No Connection

1. Upgrade Connector

The upgrade connector, designated JP69, is

used for manufacturer's diagnostic purposes

only.

3. Sideband Headers

The sideband headers are designated JP66

and JP68. For SES-2 to work properly, you

must connect an 8-pin sideband cable. See the

table to the right for pin denitions.

NOTE: SGPIO is the default setting for this

backplane.

Sideband Headers

Pin # Denition Pin # Denition

2SGPIO:

SDIN

I2C:

Backplane

Addressing

(SB5)

1 Controller ID

(SB6)

4SGPIO:

SDOUT

I2C: Reset

(SB4)

3 GND (SB2)

6 GND (SB3) 5 SGPIO:

SLOAD

I2C:SDA (SB1)

8 Backplane

ID (SB7)

7SGPIO:

SCLOCK

I2C:SCL (SB0)

10 No Connec-

tion

9 No Connection

Indice

Altri manuali Supero Hardware per computer

Supero

Supero Supero SAS-846EL Manuale utente

Supero

Supero CSE-PTJBOD-CB3 Manuale utente

Supero

Supero Supero BPN-SATA-933 BACKPLANE Manuale utente

Supero

Supero AOC-SIMLC Manuale utente

Supero

Supero Supero SMT IPMI Manuale utente

Supero

Supero Supero SAS-826A Manuale utente

Supero

Supero AOC-USAS-S4ir Manuale utente

Supero

Supero CSE-SATA-813L Manuale utente

Supero

Supero BPN-SAS2-847DR Backplane Manuale utente

Supero

Supero Supero SAS-846A Manuale utente

Supero

Supero Supero SAS-825TQ Manuale utente

Supero

Supero SAS 828TQ BACKPLANE Manuale utente

Supero

Supero SAS 822TQ BACKPLANE Manuale utente

Supero

Supero BPN-EXP-847DR1EL1 Manuale utente

Supero

Supero BPN-SAS2-216EL1 Manuale utente

Supero

Supero BPN-SAS3-217HD Backplane Manuale utente

Supero

Supero SAS-216A Manuale utente

Supero

Supero SAS2-836EL Manuale utente

Supero

Supero AOC-SIMSO+ Manuale utente

Supero

Supero Supero SAS 846 TQ BACKPLANE Manuale utente

Supero

Supero AOC-CGP-i2 Manuale utente

Supero

Supero Supero SAS 815TQ Manuale utente

Supero

Supero AOC-SIM1U Add-on Card Manuale utente

Supero

Supero Supero BPN-SAS-823TQ Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente