Supero Supero BPN-SATA-933 BACKPLANE Manuale utente

Rev. 1.0

BPN-SATA-933 BACKPLANE

USER'S GUIDE

UPER

REV 3.00

SATA933

DISABLE

ENABLE

FAN#2

FAN#1

FAN#3

FAN#4

ENABLE

DISABLE

OFF

JP61

JP62

JP63

JP64

SUPER ®

BPN-SATA-933 Backplane User's Guide

Manual Revision 1.0

Release Date: February 8, 2008

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy or otherwise reproduce/distribute any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

iii

Safety Information and Technical Speciﬁcations

Table of Contents

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines .............................................................................. 1-1

1-3 An Important Note to Users ............................................................................ 1-2

Chapter 2 Jumper Settings and Pin Deﬁnitions

2-1 Front Connectors and Jumpers ........................................................................... 2-1

Front Connectors ............................................................................................ 2-1

2-2 Front Connector and Pin Deﬁnitions............................................................... 2-3

2-3 Front Jumper Locations and Pin Deﬁnitions................................................... 2-4

Fan Jumper Settings....................................................................................... 2-4

Explanation of Jumpers .................................................................................. 2-4

Front LED Indicators ....................................................................................... 2-5

2-4 Rear Connectors and LED Indicators............................................................. 2-6

BPN-SATA-933 Backplane User's Guide

1-4 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Paciﬁc

Address: Super Micro, Taiwan

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8228-1366, ext.132 or 139

1-1

Safety Information and Technical Speciﬁcations

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electric Static Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufﬁcient to protect your equipment from ESD.

Use a grounded wrist strap designed to prevent static discharge.

Touch a grounded metal object before removing a component from the antistatic

bag.

Handle the RAID card by its edges only; do not touch its components, peripheral

chips, memory modules or gold contacts.

When handling chips or modules, avoid touching their pins.

Put the card and peripherals back into their antistatic bags when not in use.

1-2 General Safety Guidelines

Always disconnect power cables before installing or removing any components

from the computer, including the backplane.

Disconnect the power cable before installing or removing any cables from the

backplane.

Make sure that the backplane is securely and properly installed on the mother-

board to prevent damage to the system due to power shortage.

•

1-2

BPN-SATA-933 Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

•

2-1

Safety Information and Technical Speciﬁcations

UPER

REV 3.00

SATA933

DISABLE

ENABLE

FAN#2

FAN#1

FAN#3

FAN#4

ENABLE

DISABLE

OFF

JP61

JP62

JP63

JP64

Chapter 2

Jumper Settings and Pin Deﬁnitions

2-1 Front Connectors and Jumpers

54 3

Front Connectors

OH#1: JP25

OH#2: JP45

Power Connectors (4-pin): JP10, JP13, JP46 and JP48

Fan Connectors: JP54, JP56, JP58 and JP60

ACT_IN#0-7: JP26 and ACT_IN#8-14: JP47

SATA Port #0: J5

SATA Port #1: J6

SATA Port #2: J7

SATA Port #3: J8

SATA Port #4: J10

10.

4 4 4

3 3 3 5

2-2

BPN-SATA-933 Backplane User's Guide

SATA Port #5: J12

SATA Port #6: J14

SATA Port #7: J16

SATA Port #8: J22

SATA Port #9: J23

SATA Port #10: J24

SATA Port #11: J25

SATA Port #12: J26

SATA Port #13: J29

SATA Port #14: J30

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

UPER

REV 3.00

SATA933

DISABLE

ENABLE

FAN#2

FAN#1

FAN#3

FAN#4

ENABLE

DISABLE

OFF

JP61

JP62

JP63

JP64

2-3

Safety Information and Technical Speciﬁcations

2-2 Front Connector and Pin Deﬁnitions

1. OH Temperature Connector

OH#1: JP25 and OH#2: JP45

Open: 45 degrees Celcius

1-2: 50 degrees Celcius

2-3: 55 degrees Celcius

Backplane

Main Power

4-Pin Connector

(JP10, JP13,

JP46 and JP48)

Pin# Deﬁnition

1 +12V

2 and 3 Ground

4+5V

2. Backplane Main Power Connectors

The 4-pin connectors designated JP10,

JP13, JP46 and JP48 provide power to the

backplane. See the table on the right for pin

deﬁnitions.

5. Fan Connectors

The 3-pin connectors, designated JP61, JP62,

JP63 and JP60, provide power to the fans. See

the table on the right for pin deﬁnitions.

Fan Connectors

(JP54, JP56, and JP60)

Pin# Deﬁnition

1 Ground

2 +12V

3 Tachometer

SAS Activity LED Header

Pin Deﬁnitions (JP26)

Pin # Deﬁnition Pin # Deﬁnition

1 ACT IN#0 6 ACT IN#4

2 ACT IN#1 7 ACT IN#5

3 ACT IN#2 8 ACT IN#6

4 ACT IN#3 9 ACT IN#7

5 Ground 10 Empty

6. Activity LED Connector

The activity LED connectors, designated JP26

and JP47 are used to indicate the activity

status of each SAS drive. The Activity LED

Connector is located on the front panel. For the

Activity LED Header to work properly, connect

using a 10-pin LED cable.

7. SATA Ports

The SAS ports are used to connect the SAS

drive cables. The 8 ports are designated #0

- #14. Each port is also compatible with SATA

drives.

2-4

BPN-SATA-933 Backplane User's Guide

UPER

REV 3.00

SATA933

DISABLE

ENABLE

FAN#2

FAN#1

FAN#3

FAN#4

ENABLE

DISABLE

OFF

JP61

JP62

JP63

JP64

2-3 Front Jumper Locations and Pin Deﬁnitions

Explanation of Jumpers

To modify the operation of the backplane,

jumpers can be used to choose between

optional settings. Jumpers create shorts

between two pins to change the function

of the connector. Pin 1 is identiﬁed with

a square solder pad on the printed circuit

board. Note: On two pin jumpers, "Closed"

means the jumper is on and "Open" means

the jumper is off the pins.

Connector

Pins

Jumper

Setting

3 2 1

JP63 JP64

Socket Settings

Socket Socket Setting Note

JP18 Connected to front panel

Buzzer Reset

Press once to disable buzzer;

Press twice to enable buzzer

Fan Jumper Settings

This backplane supports up to four fans. To utilize each fan, you must conﬁgure

both jumpers as instructed below.

Fan Jumper Settings

Jumper Jumper Settings Fan Number

JP61 1-2 On: Enable

2-3 Off: Disable FAN #1

JP62 1-2 On: Enable

2-3 Off: Disable FAN #2

JP63 1-2 On: Enable

2-3 Off: Disable FAN #3

JP64 1-2 On: Enable

2-3 Off: Disable FAN #4

JP62

JP61

JP18

Indice

Altri manuali Supero Hardware per computer

Supero

Supero Supero SAS-825TQ Manuale utente

Supero

Supero SAS-837A BACKPLANE Manuale utente

Supero

Supero BPN-SAS3-217HD Backplane Manuale utente

Supero

Supero AOC-SGP-i4 Manuale utente

Supero

Supero SAS 933TQ Manuale utente

Supero

Supero X10DGO-T Manuale utente

Supero

Supero AOC-SIM1U Add-on Card Manuale utente

Supero

Supero SAS 828TQ BACKPLANE Manuale utente

Supero

Supero AOC-SIMLC Manuale utente

Supero

Supero Supero SAS2-847EL BACKPLANE Manuale utente

Supero

Supero BPN-EXP-847DR1EL1 Manuale utente

Supero

Supero BPN-SAS3-827HQ Backplane Manuale utente

Supero

Supero AOC-USAS-S4ir Manuale utente

Supero

Supero Supero SMT IPMI Manuale utente

Supero

Supero Supero SAS 815TQ Manuale utente

Supero

Supero SAS-216A Manuale utente

Supero

Supero AOC-UG-i4 Manuale utente

Supero

Supero SAS 808TQ Manuale utente

Supero

Supero Supero SAS 846 TQ BACKPLANE Manuale utente

Supero

Supero Supero SAS-846A Manuale utente

Supero

Supero AOC-SIMSO+ Manuale utente

Supero

Supero Supero SAS-846EL Manuale utente

Supero

Supero Supero SAS-826A Manuale utente

Supero

Supero BPN-SAS2-847DR Backplane Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente