Swegon SuperWISE II a Manuale utente

SuperWISE II a

SuperWISE II SC a

Instructions for Use 20171120

Art. 1545229

The document was originally written in Swedish.

Symbol key

Symbols on the machine.

This product complies with applicable EU direc-

tives

Symbols in this user manual

Warning/Caution!

Electrical voltage

The packaging contains the following

items:

1 SuperWISE II / 1 SuperWISE II SC (Swegon Connect)

1 x Instructions for use

Electrical safety

Permitted voltage, see “Electrical data”.

It is not permissible to insert foreign objects

into the product’s contactor connections or the

electronics's ventilation openings; as this entails

a risk for short circuiting.

Ensure that the product is disconnected from the power

supply when working on products that are not required

to run.

Always follow local/national regulations regarding who

may carry out this type of electrical installation.

Handling

• The product must be handled with care.

Installation

• Moist, cold and aggressive environments must be

avoided.

• Avoid installing the product near a heat source.

• Assemble the product according to applicable indus-

try regulations.

• Install the product so that it cannot be accessed by

unauthorized persons.

• Install the product for easy access during service and

maintenance.

• Install the product so that the cabinet door can open

unobstructed.

• Check to make sure that the product does not have

any visible defects.

• Check that the product is properly secured after it has

been installed.

• Check that all cables are properly secured in place

after they have been installed.

• Avoid installing the product on metal walls or by steel

beams.

Application area

The product is a control unit designed for comfort ventila-

tion within Swegon’s system for demand-controlled ventila-

tion WISE.

The product is used to collect ventilation and climate data

and to optimise the operation of the air handling unit.

SuperWISE also provides data that is available via the web

interface.

SuperWISE SC offers a ﬂexible cloud based service that

permits communications between products, systems and

users. By using Swegon Connect the system can be moni-

tored and controlled remotely.

General

Read through the entire instructions for use

before you install/use the product and save

the instructions for future reference. It is not

permissible to make changes or modify this

product other than what is speciﬁed in this

document. Place the cabinet so that it is not

accessible to unauthorised persons.

SuperWISE II/SuperWISE II SC

Swegon reserves the right to alter specications. 20171120

Installation dimensions

and weights

Figure 1. SuperWISE II, SuperWISE // SC, measurement ﬁgure.

*Minimum clearance to adjacent installations.

Figure 2. SuperWISE //, SuperWISE // SC underside, measurement

ﬁgure.

150

M25 (x1)

40 3535 35

M16 (x2)Ø22,5 (x6)

360

260

Figure 3. Holes for installation, SuperWISE //,

SuperWISE II SC. 4x installation screws (clearance hole Ø = 8

mm), screw selection based on the substrate.

Weight (kg)

SuperWISE II 5.8

SuperWISE II SC 6.3

400 40

300

Antenna only on SuperWISE II SC

20171120 Swegon reserves the right to alter specications.

SuperWISE II/SuperWISE II SC

1. SuperWISE II control unit - Main communication unit

2. Swegon Connect – Router (option). Communicates

on the mobile network and ideally on the 4G net-

work. If the cabinet contains Swegon Connect, the

cabinet must be placed so that it can receive mobile

signals. The cabinet can be supplemented with

antenna ampliﬁcation (6) for improved mobile cover-

age. See the separate documentation for Swegon

Connect on www.swegon.com

3. Switch - 8 ports (if several ports are required, install a

supplementary switch outside of the cabinet)

• Port 1: SuperWISE II control unit

• Port 2: Swegon Connect

• Port 3-8: Free for e.g. WISE DIR/AHU/BMS

4. Main switch - Connection of the power supply

5. Transformer

6. Antenna to Swegon Connect

7. Earth connection

Figure 4. SuperWISE //, SuperWISE II SC.

NOTE! SuperWISE II does not contain Swegon Connect (2) or an antenna (6).

Connections

Connect the cables in the following order:

A. Communication cables (see item 3 below)

B. Power supply 230 V AC (see items 4 and 7 below)

4 57

SuperWISE II/SuperWISE II SC

Swegon reserves the right to alter specications. 20171120

DIV GPS ANT

PWRUSBETH0 ETH1

IN0 IN1 OUT

IN0

IN1

OUT

SIM

WAN

DAT

PWR

USR

POE

12345

Output DC

24V 30W

DC OK

UNI POWER

Input AC

100V-240V

20A

L.ON

O.OFF

Figure 6. SuperWISE II control unit, top, connection.

COM USB 3.0

USB 2.0

SIM Card

USB external memory

(Mounted USB memory supplied)

HDD

SYS

LAN LAN

VGA

DIO

DC 12-24V

FG V- V+

DIV GPS ANT

PWRUSBETH0 ETH1

IN0 IN1 OUT

IN0

IN1

OUT

SIM

WAN

DAT

PWR

USR

POE

Antenna

Output DC

24V 30W

DC OK

UNI POWER

Input AC

100V-240V

Service

port

Figure 5. SuperWISE //, SuperWISE // SC, connection.

RJ45

Port 3-8 AHU (for example GOLD,

WISE DIR, property network)

230 V AC

L N

20171120 Swegon reserves the right to alter specications.

SuperWISE II/SuperWISE II SC

LED - Explanation

DIV GPS ANT

PWRUSBETH0 ETH1

IN0 IN1 OUT

IN0

IN1

OUT

SIM

WAN

DAT

PWR

USR

POE

Not used.

SIM: Steady green light with the SIM card

is inserted

WAN: Flashes orange if there is contact with

the mobile network (2G, 3G or 4G)

DAT: Flashes red when data is ready to

send over the mobile network

PWR:

(Power)

Flashes green - power to the unit

USR: “Spare”

POE: Power over Ethernet, “Spare”

Swegon Connect

SuperWISE II control unit

HDD

SYS

LAN LAN

VGA

DIO

DC 12-24V

FG V- V+

DC power supply

Output DC

24V 30W

DC OK

UNI POWER

Input AC

100V-240V

Green light when the voltage is on, goes

out when the output voltage drops below

21.5V DC

Switch

Green light - data being sent

Orange diode denotes which

communication rate is active

Lit: 100 Mbps

Not lit: 10 Mbps

Green light - power to the unit

Figure 7. LED key SuperWISE II control unit.

Figure 8. LED key Swegon Connect control unit.

Figure 9. LED key DC power supply.

Figure 10. LED key switch.

HDD: Flashes red - Storage on the memory unit

SYS: Green light - Power to the unit

SuperWISE II/SuperWISE II SC

Swegon reserves the right to alter specications. 20171120

Use

Commissioning

Commissioning must be performed by qualiﬁed and

trained WISE service engineers.

Trouble shooting

• Check that the cables are connected correctly.

• Make sure that the product is energized, the supply

LED should be lit/ﬂash green.

• Check the LED indications, see “LED key”.

• Check the status on the SuperWISE user interface (web

pages).

• Check that Swegon Connect is connected correctly and

that the SIM card is inserted correctly.

Maintenance

Cleaning of electrical components

• If needed, use a dry cloth to clean the components.

• Never use water, detergent and cleaning solvent or a

vacuum cleaner.

External cleaning

• If necessary use tepid water and a well-wrung cloth.

• Never use solvents.

Service/maintenance

• The product does not require any maintenance, except

for any cleaning when necessary.

• It is not permissible to open or repair electrical compo-

nents.

• If you suspect that the product or a component is

defective, please contact Swegon.

• A defective product or component must be replaced by

an original spare part from Swegon.

Materials and surface treatment

The cabinet is made of polycarbonate (PC), colour code:

RAL 7035 (Industrial grey).

Disposal

Waste must be handled according to local regulations.

Product warranty

The product warranty or service agreement will not be in

effect/will not be extended if: (1) the product is repaired,

modiﬁed or changed, unless such repair, modiﬁcation

or change has been approved by Swegon AB; or (2) the

serial number on the product has been made illegible or

is missing.

20171120 Swegon reserves the right to alter specications.

SuperWISE II/SuperWISE II SC

Control unit replacement

Turn off the power using the main switch before any work is

started.

Disconnect all the cables to the control unit, loosen the four

screws and lift out the control unit.

Place the control unit on the 4 spacer bolts and screw back the

screws. Reconnect the cables and switch on the power using the

main power switch.

Figure 11. Control unit replacement.

Retro-ﬁtting Swegon Connect

OFF

Turn off the power using the main switch before any work is

started.

Disconnect all the cables to the control unit, loosen the four

screws and lift out the control unit. Fit the antenna in the top of

the enclosure and tighten the lock nut on the inside.

Antenna

Fit a DIN rail-mount on Swegon Connect and mount on the

DIN rail in the bottom of the cabinet. Connect the antenna and

cables, see “Connection”.

Reﬁt the control unit and connect the cables. Switch on the

power using the main power switch.

Figure 12. Retro-ﬁtting Swegon Connect.

OFF

Main Switch Main Switch

SuperWISE II/SuperWISE II SC

Swegon reserves the right to alter specications. 20171120

References

www.swegon.com

Building Materials Declaration

WISE System Guide

SuperWISE II / SuperWISE II SC product sheet

SuperWISE II / SuperWISE II SC User Manual

Technical data

Output power (ERP) SuperWISE II SC

External mobile network: Max. 2W (GSM mode)

Frequency band SuperWISE II SC

External mobile network: 900/2100... MHz

USB: Type A

Switch/ Ethernet: Switch supports 3 (Gold/AHU)

+ 3 outputs (WISE DIR)

IP class: IP44

Ambient temperature

Operation: -20 – +50°C

Storage: -40 – +80°C

RH: 10-95% non-condensing

CE marking: 2014/53/EU (RED)

2011/65/EU (RoHS2)

Electrical data

Power supply: 230V 10 A

Connections pipe dim.

Power terminals:

Max. 2.5 mm

Suitable cable diameter through the

chassis (screw terminals):

5-10 mm

Max. power consumption

SuperWISE II: 34W

SuperWISE II SC: 34W

Declaration of Conformity

Swegon AB hereby declares that the radio equip-

ment SuperWISE II / SuperWISE II SC conforms

with the Directive 2014/53/EU and Directive 2011/65/EU.

The complete EU Declaration of Conformity is available at

Swegon’s website: www.swegon.com.

This declaration is applicable only if the product has been

installed according to the instructions in this document and if

no changes have been made on this product.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Swegon Unità di controllo

Swegon

Swegon TBLZ-3-50 Manuale elenco delle parti

Swegon

Swegon P.LEMMENS CB4 TAC4 REC Manuale utente

Swegon

Swegon CCO kit Manuale utente

Swegon

Swegon CASA series Manuale

Swegon

Swegon TBLZ-1-48-2 GOLD Manuale utente

Swegon

Swegon SuperWISE II Manuale utente

Swegon

Swegon IQlogic+ TBIQ-3-2-aa GOLD Manuale utente

Swegon

Swegon TBLZ-1-48-1 Manuale utente

Swegon

Swegon Parasol evo II ma Manuale utente

Swegon

Swegon TBLZ-1-66 Manuale utente

Swegon

Swegon TBLZ-2-48-2 Manuale utente

Swegon

Swegon Parasol ma Manuale utente

Swegon

Swegon TBIQ-2-1-aa IQnomic Plus GOLD Manuale utente

Swegon

Swegon CRTc Guida

Swegon

Swegon CRM Manuale utente

Swegon

Swegon WISE Parasol Z b Series Manuale utente

Swegon

Swegon CONDUCTOR Manuale utente

Swegon

Swegon TBIQ-3-1 Manuale di istruzioni e di sicurezza

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente