Sylvania SP953 Manuale utente
PORTABLE BLUETOOTH SPEAKER
MODEL NO.: SP953
INSTRUCTION MANUAL
Please read these instructions thoroughly
before use and retain for future reference
SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.
Introduction
Thank you for choosing the Sylvania SP953 Bluetooth Speaker as your source for
entertainment! You can use this item with iPads, iPhones, iPods and many types of
smartphone to stream music. In order to get the best results when using the device,
please read this manual first before using.
Description
Package Contents
1. Bluetooth Speaker
2. Micro USB Charging Cable
3. User Manual
Features
•Bluetooth –enables simple wireless pairing with your Bluetooth-enabled devices
•360-Degree sound with deep bass
•Stylish rubberized design with carrying hook
•Large control buttons for easy operation
•3.5mm standard auxiliary input provides a simple wired connection to wide variety of
devices
•Built-in rechargeable battery
Safety Instructions
•Keep the unit away from heat sources, direct sunlight, humidity, water and any other
liquids.
•DO not operate the unit if it has been exposed to water, moisture or any other liquids
to prevent against electric shock, explosion and/or injury to yourself and damage to
the unit.
•Do not use the unit if it has been dropped or damaged in any way.
•Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
•Do not use the unit with wet hands.
•Do not put objects into any of the openings.
•Keep the unit free from dust, lint, etc.
•Do not use this unit for anything other than its intended use.
•Keep the unit out of reach of children.
•This product is not a toy.
INSTRUCTIONS FOR USE
Charging the Speaker
The speaker has built-in rechargeable battery. When the battery is drained out, speaker
would turn OFF automatically. please recharge the battery every time it drains out.
Attach the Micro USB cable to the unit and plug into any USB charger. If the unit is
completely discharged, it will take approximately 5 hours to fully charge at 5V/500mA.
The Red LED will illuminate during charging, when it has completed, the Red LED will
turn off. There will be a beep when the battery is low and needs to be recharged.
Please charge it completely before the first-time use.
Operation
•Press and Hold "ON/OFF" button 2 seconds to power ON, the Blue LED will start to
flash.
•If an Aux (3.5 mm) cable is connected to the unit, the Blue LED will turn off, and the
Green LED will stay illuminated, notifying you, the unit is in Aux-In mode.
•Press and Hold "ON/OFF" button 2 seconds to power OFF.
Bluetooth Mode
Pairing
The unit will go into “Pairing Mode” when the Bluetooth pairing button is pressed. Go into
your Bluetooth device settings menu and look for “Sylvania SP953”
After the unit has paired and connected, it will re-connect automatically when the unit is
powered on and the device is in range.
Note: Bluetooth Timeout: 10 minutes. You can press and hold the Bluetooth pairing
button to unpair your current device and search for new devices in Bluetooth mode.
Begin Streaming Music
•Press Play/Pause button to start playing music
•Press and Hold “+”button 2 seconds to play the next track
•Press and Hold “-”button 2 seconds to play previous track
•Press either “+” or “-”button for volume control
Note: You will hear an audible alert when the maximum / minimum volume level has
been reached.
Aux-In Mode
Plug in the supplied 3.5 mm cable into the unit. The other end is connected to your device.
The Green LED will only illuminate when in “Aux” mode.
Please note music and volume can be controlled by your device.
LED Status
Blue LED flashing & Blue LED solid
Bluetooth Mode
Green LED on solid
Aux Mode
Red LED
Charging
Red LED off
Full charged
Troubleshooting
Unit doesn’t connect to device
Speaker needs to be connected/
re-paired to device
A tone is heard every few seconds
Speaker needs to be charged
Unit will no power on
Speaker needs to be charged
Unit doesn’t control track(s)/volume
Speaker needs to be in Bluetooth mode
for full control
Unit distorts at high volume
The devices’ volume needs to be lowered
Care and Maintenance
Read the following recommendations before using the Bluetooth Speaker. Following
these you will be able to enjoy the product for many years.
•Do not expose the Bluetooth Speakers to liquid, moisture or humidity to avoid the
product's internal circuit being affected.
•Do not use abrasive cleaning solvents to clean the device.
•Do not expose the device to extremely high or low temperature as this will shorten the
life of electronic devices, destroy the battery or distort certain plastic parts.
•Do not dispose of the device in a fire as it will result in an explosion.
•Do not expose the device to contact with sharp objects as this will cause scratches
and damage.
•Do not let the device fall on the floor. The internal circuit might get damaged.
•DO not attempt to disassemble the device as it may get damaged if you are not
professional.
Specifications
Bluetooth specification
Bluetooth 5.0 (A2DP, HFP, AVRCP)
Bluetooth Range
33ft (10m)
Charging input voltage
DC 5V = 500mA
Built-ln Battery
1200mAh rechargeable lithium battery
Dimension
200mm x 78mm
Battery life & charging time may vary based on usage & types of devices used.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Altri manuali per SP953
1
Indice
Altri manuali Sylvania Altoparlanti
Sylvania
Sylvania SP845 Manuale utente
Sylvania
Sylvania SP399 Manuale utente
Sylvania
Sylvania SP136 Manuale utente
Sylvania
Sylvania SP353-B-BLACK Manuale utente
Sylvania
Sylvania SP230 Manuale utente
Sylvania
Sylvania SP926 Manuale utente
Sylvania
Sylvania SP355 Manuale utente
Sylvania
Sylvania SP717 Manuale utente
Sylvania
Sylvania SP5686 Manuale utente
Sylvania
Sylvania SP333-DG Manuale utente
Sylvania
Sylvania SPA154 Manuale utente
Sylvania
Sylvania SP5775 Manuale utente
Sylvania
Sylvania MA-960-D Manuale utente
Sylvania
Sylvania SP672 Manuale utente
Sylvania
Sylvania SP2412-BLACK-PL Manuale utente
Sylvania
Sylvania SP269PL-ASST Manuale utente
Sylvania
Sylvania SB2905 Manuale utente
Sylvania
Sylvania SPA151 Manuale utente
Sylvania
Sylvania SP288 Manuale utente
Sylvania
Sylvania SP770 Manuale utente
