Symbol LL 425 Manuale utente

RS 2200/3200 Series

LL 425

Quick Reference



1994 - 1998 SYMBOL TECHNOLOGIES, INC.

Symbol reserves the right to make changes to any product to improve reliability, function, or

design.

Symbol does not assume any product liability arising out of, or in connection with, the application

or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any patent

right or patent, covering or relating to any combination, system, apparatus, machine, material,

method, or process in which Symbol products might be used. An implied license only exists for

equipment, circuits, and subsystems contained in Symbol products.

Symbol is a registered trademark of Symbol Technologies, Inc. Other product names mentioned in

this manual may be trademarks or registered trademarks of their respective companies and are

hereby acknowledged.

Symbol Technologies, Inc.

One Symbol Plaza

Holtsville, N.Y. 11742-1300

http://www.symbol.com

Patents

This product is covered by one or more of the following U.S. and foreign Patents:

U.S.PatentNo.4,360,798;4,369,361; 4,387,297;4,460,120; 4,496,831;4,593,186;

4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660;

4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833;

5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520

5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904;

5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792;

5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164;

5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361;

5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081;

5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231;

5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002;

5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889;

5,552,592; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531;

5,619,028; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800;

5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,745,794; 5,754,587; 5,658,383;

D305,885; D341,584; D344,501; D359,483; D362,453; D362,435; D363,700;

D363,918; D370,478; D383,124; D391,250.

InventionNo. 55,358;62,539;69,060;69,187(Taiwan);No. 1,601,796;1,907,875;

1,955,269 (Japan).

European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/

03938; Italy 1,138,713.

rev. 7/98

Quick Reference

Set Up

Connect the appropriate input devices. See the LL 425

User’s

Guide

Connectthe appropriate interface cableassembly. See theLL425

Interface Guide

for more information.

When the host can provide sufﬁcient power for the LL 425 and

a 5V scanner, the interface cable assembly is set up at the factory

with a Power Selection Plug installed. To power the LL425 (and

connected devices) from an external power supply, remove the

Power Selection Plug and connect a power supply. The Scanner

Port is set at the factory for 5V on the I000A model, and 12V on

the I000B. To change this setting, refer to the LL 425

User’s

Guide

SCANNER

MAGSTRIPE

Quick Reference

Programmable Parameters and Defaults

Parameter Default

Code Types All

Code Lengths

Code 39 1 to 55

Code 128 3 to 55

Codabar 2 to 55

I 2 of 5 14

D 2 of 5 14

MSI Plessey 1 to 55

Decode Options

Transmit UPC-A Check Digit Enabled

Transmit UPC-E Check Digit Enabled

MSI Plessey Check Digit 1 Digit

Decode UPC/EAN Supp. Disabled

Convert UPC-E to UPC-A Disabled

EAN Zero Extend Disabled

Buffer Code 39 Disabled

Xmit Code 39 Check Digit* Disabled

Beep After Good Decode Enabled

Beeper Volume High

UPC-A Preamble System Character

UPC-E Preamble System Character

Pause Duration 0

Quick Reference

Programmable Parameters and Defaults

Parameter Default

Preﬁx/Sufﬁx Values 7013 (<Enter> for serial

devices

Scan Data Xmission Format Data as is

Magstripe Data Xmission Format Data as is

Laser Control

Trigger Mode Level

Laser On Time-out 1 Sec

Laser Off Time-out 1 Sec

RS-232C Single Port

Baud Rate 9600

Parity Even

Check Parity Enabled

Hardware Handshaking None

Software Handshaking None

Serial Response Time-out 2.0 Sec

Stop Bit Select Two

7 or 8-Bit ASCII Data Format 7 Bit

Intercharacter Delay 0

Transmit Code ID Character Disabled

Ignore Unknown Characters Disabled

NCR 2152 Fast Transmit Disabled

IBM 4683/4 Magstripe Comm Enabled

Quick Reference

Host Selection

Each Interface Cable Asembly will default the LL 425 to a given

host. Below is a list of the assemblies and their corresponding

default hosts. If your host type is not listed below, you must

selectit by scanning the appropriate bar code beginning on page

page 10.

Cable Assembly Default

IK-010X IBM 4683 Port 5B

IK-0200 IBM 3683 48-Key Calc

IK-0300 IBM 3653 Kybd Wedge

IK-040X IBM PC/AT Kybd Wedge

IK-0500 NCR 2152 Tel Kybd Wedge

IK-0600 NCR 2151 Tel Kybd Wedge

IK-0700 NCR 280 Kybd Wedge

IK-080X Standard RS-232C

IK-090X Fujitsu OCR

IK-100X NCR “F” OCIA

IK-1100 IBM 4683, Port 9B

Quick Reference

Customizing the Data

If you want to append an ENTER (CR) to all data, scan the ﬁve

bar codes below, starting at the top and working down. When

you do this, all previously stored ADF rules will be deleted.

ERASE ALL RULES

ANY SOURCE

SEND ALL DATA

SEND ENTER

SAVE RULE

Quick Reference

What Does The Beep Mean?

When you hear 1 beep (short high tone) it means data has

been decoded successfully. If any other beeps are heard,

contact the technical person in charge of scanning.

What If..

Nothing happens when you follow the operating

instructions.

• Refer to the WHAT IF... table on the next page.

• Find the symptom and check the items marked with an

“x”.

If, after performing these checks the symbol still does not scan,

contact the technical person in charge of scanning.

Quick Reference

What If...

No Power Up

No Transmit

Wrong Data

or Garbled

Scanner

Inoperative

Magstripe

Inoperative

Check

Proper Cable X X

Position of J4 X

Correct Terminal

Type Programmed?

Power to Host

System?

Cable Connected

To Host?

Power Selection

Plug Inserted?

XXX

Power Supply

Plugged In?

XXX

Quick Reference

Host Types

IBM PC/AT and Clones

Fujitsu 9000

IBM PS2/50/55SX/60/70/80

IBM PS2/30Wedge

IBM PC/XTWedge

and Clones

IBM 4683/4684

Port 5B

IBM 4683/4684

Port 9B

IBM 4683/4684

Port 17

Indice

Altri manuali Symbol Lettore di codici a barre

Symbol

Symbol CS1504 Manuale utente

Symbol

Symbol WSS 1000 Manuale utente

Symbol

Symbol LS3578-ER - Symbol - Wireless Portable Barcode... Manuale utente

Symbol

Symbol CS4070 Manuale di installazione e funzionamento

Symbol

Symbol LS 2100 Series Manuale utente

Symbol

Symbol LS 2104 Istruzioni operative

Symbol

Symbol P360 Manuale utente

Symbol

Symbol LS 6005i Manuale di installazione e funzionamento

Symbol

Symbol MiniScan MS-220X Guida rapida alla configurazione

Symbol

Symbol LS4000P Series Manuale di installazione e funzionamento

Symbol

Symbol LS 3070 Manuale di installazione e funzionamento

Symbol

Symbol Keychain Barcode Scanner Manuale utente

Symbol

Symbol LS 3000 Manuale utente

Symbol

Symbol LS 4208 Manuale utente

Symbol

Symbol LS3578 Manuale utente

Symbol

Symbol PSM20i Manuale utente

Symbol

Symbol LS3008 Manuale utente

Symbol

Symbol CRD 2700-4200E Manuale utente

Symbol

Symbol SYMBOL MS120XFZY Manuale utente

Symbol

Symbol LS3578 Manuale utente

Symbol

Symbol LS4278 Manuale di installazione e funzionamento

Symbol

Symbol PDT 7200 Series Manuale utente

Symbol

Symbol LS4278 Manuale utente

Symbol

Symbol MC909X-K Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente