Symbol MDM 3006 Manuale utente

MDM 3006

Modem Module

MDM 3006

Modem Module

Symbol reserves the right to make changes to any product to improve reliability, function, or

design.

Symbol does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any

patent right or patent, covering or relating to any combination, system, apparatus, machine,

material, method, or process in which Symbol products might be used. An implied license only

exists for equipment, circuits, and subsystems contained in Symbol products.

Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other

product names mentioned in this manual may be trademarks or registered trademarks of their

respective companies and are hereby acknowledged.

Symbol Technologies, Inc.

One Symbol Plaza

Holtsville, N.Y. 11742-1300

http://www.symbol.com

Patents

This product is covered by one or more of the following U.S. and foreign Patents:

U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;

4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281;

4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461;

5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149;

5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791;

5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163;

5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151;

5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140;

5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949;

5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621;

5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679;

5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803;

5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153;

5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731;

5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050;

5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146;

5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659;

5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892;

6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482;

6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265;

6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681;

6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061;

6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587;

6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584;

D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250;

D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;

D430,158; D430,159; D431,562; D436,104.

Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875;

1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832;

France 81/03938; Italy 1,138,713

rev. 06/02

Quick Reference

Introduction

The MDM 3006 Modem Module allows you to dial into a remote

host computer using an SPT 1700, an SPT 1800, a PPT 2700, or

a PPT 2800.

About This Guide

This Quick Reference Guide provides information for installing,

configuring, removing, and using theMDM 3006. Specific topics in

this guide include:

•MDM 3006 Connectors on page 2

•Attaching and Removing the MDM 3006 on page 2

•Charging the Terminal’s Battery on page 2

•Connecting to the Phone Line on page 3

•Configuring for Palm OS on page 4

•Configuring for Pocket PC 2000 on page 8

•Configuring for Pocket PC 2002 on page 13

•Modem Country Setup on page 19

•Troubleshooting on page 20

•Technical Specifications on page 24

•Regulatory Information on page 25

•Service Information on backcover.

For detailed information on any SPT 1700, SPT 1800, PPT 2700

or PPT 2800 terminal, please refer to the Quick Reference Guide

or Product Reference Guide for that terminal.

Forinformationonorderingotheraccessoriesor Symbolmanuals,

please contact your Symbol Support Center, as listed on the

backcover of this manual.

MDM 3006

Modem Module

MDM 3006 Connectors

Attaching and Removing the MDM 3006

ToattachtheMDM 3006to your terminal, place it atthe

bottom of the terminal as shown, and press the

terminal into place.

To remove, pull the terminal from the MDM 3006.

While the MDM 3006 is attached, you cannot:

• use a cradle for battery charging or

communication

• use the RS-232 serial port on the bottom of the

terminal.

Charging the Terminal’s Battery

To charge the terminal’s battery with the MDM 3006 attached, you

need a power supply and a line cord.

Note: Use only a Symbol-approved power supply (p/n 50-

14000-107) output rated 9VDC and minimum 2A. The

power supply is certified to EN60950 with SELV

outputs.

Hinweis:Benutzen Sie nur eine Symbol Technologies

genehmigt Stromversorgung (p/n 50-14000-107) in

den Ausgabe: 9VDC und minimum 2A. Die

Stromversorgung ist bescheinigt nach EN60950 mit

SELV Ausgaben.

RJ-11

Phone Jack Battery Charger

Connector

Quick Reference

To charge the terminal’s battery:

The terminal’s battery is fully charged after two hours, if terminal is

off. You can continue to use the terminal while it is plugged into the

wall outlet.

Connecting to the Phone Line

To dial in to a remote hostcomputer using the MDM 3006, you will

need an RJ-11 cable. To connect this cable:

1. Insert the RJ-11 cable into the RJ-11 phone jack on the MDM

3006.

2. Connect the other end of the cable into an analog telephone

jack on the wall.

Line

Cord

Power

Supply

MDM 3006

Modem Module

Caution: Toreducetheriskof fire, use onlyNo.26 AWGor larger

RJ-11 cable.

Using the Correct Telephone Line Type

Use a standard analog phone line. In an office, use a line

connected to a fax machine or modem. In a hotel, request a room

with a standard phone line. If necessary, check with the local

phone company or administrator to ensure you’re using the right

type of line before connecting to the modem.

Configuring for Palm OS

Note: Modem drivers for Palm OS version 3.2 and 3.5 are

available at http://devzone.symbol.com.

The drivers enable power to the modem through the

terminal's serial port. For OS version 3.2, use

PowerDrv32.prc; for version 3.5, use PowerDrv35.prc.

Use HotSync to load the driver onto the terminal, and

then perform a soft reset.

Host Computer Setup

To use the MDM 3006 to synchronize with your network, Palm

Desktop Software must be installed and an external modem must

be attached to the host computer's COM port.

1. Install Palm Desktop Software on your host computer.

Download the latest version from www.palm.com/support.

Refer to the instructions included with the software you

download.

Quick Reference

2. Start Palm Desktop and configure the HotSync Manager for

modem connections. Refer to the instructions included with

software you download.

Modem Requirements

• a terminal

• an MDM 3006 modem

• telephone number from your dial-in server administrator

• a dial-in account on the host system, including a user ID and

password

• a RJ11 or RJ12 modem cable

• a functioning telephone jack that supports plug-in modems

connected to the local telephone system.

Terminal Setup

To define modem connection settings:

1. Tap the Applications icon in the Graffiti area to display the

Applications Launcher screen.

2. Tap the Prefs icon to display the

Preferences screen.

3. Tap the triangle in the upper right

corner of the screen to display a

menu and select Connection.

4. Tap New... to create a new

connection, or select Custom from

Available Configuration drop-down

menu and tap Edit....

5. Enter a name for the connection in the Name: text box.

MDM 3006

Modem Module

6. Select PwrCradle to Modem from the Connection Method

drop-down menu.

7. Select TouchTone from the Dialing drop-down menu.

Note: Do not select Rotary unless you are sure your

telephone service does not support Touch Tone dialing.

8. Select Off from the Volume drop-down menu (there is no

speaker in this modem).

9. Tap the Details... button to select speed and flow

control.

10. Select 57,600 bps from the Speed drop-down menu for best

performance.

11. Select Automatic from the Flow Ctl drop-down menu for the

modem connection.

12. If necessary, edit the Init String: text box to set country

parameters. The modem defaults to operation with US

telephone networks. To operate the modem with other

country telephone networks, you must set the appropriate

country code. See Modem Country Setup on page 19.

13. Tap the OK button until you return to the Preferences screen

shown in step 2 on page 5.

To prepare your terminal for a modem HotSync operation:

1. Tap the Applications icon in the Graffiti area to display the

Applications Launcher screen.

Quick Reference

2. Tap the HotSync icon.

3. Tab Modem on the HotSync

screen.

4. Tap the Menu icon in the Graffiti

area and select Modem Sync

Prefs... from the Options menu.

5. Tap Direct to modem.

6. Tap the OK button.

7. Tap the Enter phone # button to

open the Phone Setup screen.

8. Enter the telephone number

required to access the modem

connected to your host computer in the Phone #: text box.

9. If necessary, select the Dial Prefix: check box and enter a

dial prefix (such as “9”) to access an outside line. A comma

can be used to insert a “pause” in the dialing sequence.

10. If your phone line has call waiting, select the Disable call

waiting: check box and enter a code to avoid an interruption

during the modem HotSync operation.

11. If you want to use a calling card to place the call, select the

Use calling card: check box and enter the calling card

number.

MDM 3006

Modem Module

12. Tap the OK button to return to the HotSync dialog.

Communication setup is now complete.

How to Dial in

1. Tap the Applications icon in the Graffiti area to display the

Applications Launcher screen.

2. Tap the HotSync icon.

3. Tap Modem on the HotSync screen.

4. Select the name you gave the

connection in step 5 on page 5 by

tapping the drop down menu for

connection names.

5. Tap the HotSync icon to start

dialing.

6. If successful, a series of dialog

boxes pop-up in succession and

the connection is authenticated by

the host computer.

Configuring for Pocket PC 2000

Host Computer Setup

To use the MDM 3006 to communicate with your network,

ActiveSync and Remote Access Server (RAS) software must be

installed on the host computer. Othertypes of modem applications

can also be used with your MDM 3006.

1. Install ActiveSync on your host computer. Download the

latest version of the software fromhttp://www.microsoft.com.

Refer to the installation and RAS instructions included with

the ActiveSync software you download.

Indice

Altri manuali Symbol Unità di controllo

Symbol

Symbol MDM 3000 Series Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente