SYNTEK BlueW 2310 miniCard Manuale utente
1/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
BlueW_2310 miniCard
WiFi 802.11 b/g and Bluetooth v2.0 + EDR
Combo Module
User’s Manual
Version 1.1
太欣半導體股份有限公司
2/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 3.04cm between the radiator & your body.
3/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
1. Before installation
Requirement environments:
• Windows Vista / Vista-64 / XP sp2 / XP sp3 / 2000 sp4 or above
• At least 50 MB of available free hard disk space for installing the drive
• An IEEE 802.11b, or IEEE 802.11g Access Point (for Infrastructure Mode) or
another Wireless Adapter (for Ad-Hoc Mode). Also, the BlueW-2310 miniCard
can compatible with most 802.11n AP router.
• One Available MiniCard Module
• CD-ROM Drive (for Driver installation only)
2. Package Contents Check
9BlueW-2310 miniCard Combo Module x 1
Software CD x 1 include
User’s Manual
IVT BlueSoleil Bluetooth software and driver
3DSP WLAN windows software and driver
This Quick Setup Guide x 1
Warranty Card x 1
# Please informs your dealer if there are any missing or damaged parts.
4/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
Contents
1. Introduction............................................................................................................5
2. Product Features.....................................................................................................6
3. Install the Drivers and Utilities..............................................................................7
4. Wireless Configuration........................................................................................19
4.1 Configuring Your Wireless Network with Windows XP .........................19
4.2 Single Access Point Network...................................................................21
4.3 Multiple Access Point Network...............................................................22
4.4 Setting Up a Peer-to-Peer Network..........................................................23
4.5 Wireless Performance Considerations.....................................................24
4.6 WiFi Security Considerations..................................................................25
5. Bluetooth Configuration and Utilities..................................................................26
5.1 Start the Bluetooth Device.......................................................................26
5.2 Manual Configuration Bluetooth Dongle ................................................27
5.3 Start Bluetooth .........................................................................................30
5.4 Establish Bluetooth Connection...............................................................30
5.5 Stop the Bluetooth Device .......................................................................31
6. 3DSP Combo USB Dongle Utility Configuration...............................................33
7. Driver Uninstallation ...........................................................................................34
8. Troubleshooting...................................................................................................37
9. Specifications.......................................................................................................42
10. Contact Information.....................................................................................43
5/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
1. Introduction
The SYNTEK BlueW-2310 miniCard product provides the highest level of
integration and most aggressive BOM cost by integrating IEEE 802.11b/g and
Bluetooth v2.0 + EDR into a single MAC/Baseband chip utilizing a single 2.4GHz
transceiver. Integrated on-chip power amplifier and LNA reduce external component
count, while still able to deliver ample transmit power for most applications.
Different from any other wireless LAN and Bluetooth chip set vendor, SYNTEK and
3DSP uses its patented Software Radio technology to implement both wireless LAN
and Bluetooth in software. The highly optimized software radio DSP technology
enables BlueW-2310 miniCard to integrate class 1 Bluetooth v2.0 + EDR
function without any added cost to the total solution. No extra antenna, PA, RF
transceiver, resistor, capacitor, crystal or any components are needed. The
software solution even guarantees the Bluetooth RF performance if the wireless
LAN performance is tested to be good. It eliminates the need for system
manufacturers to separately test the module’s Bluetooth RF performance,
therefore reduce the testing time and cost.
The BlueW-2310 miniCard utilizes 3DSP’s patent pending technologies to
fundamentally solve the interference and performance issues existed during
802.11b/g and Bluetooth coexistence, thus improving both 802.11b/g and
Bluetooth performance and link stability in real environment. As a result, it
enhances user experience in a totally wireless environment, where all devices are
connected wirelessly through either Bluetooth link or 802.11b/g link.
The single installation package allows for easy setup and configuration of both
802.11b/g and Bluetooth devices. Combined user interface is intuitive to use. Once
configured, both wireless links operate transparently in the background.
6/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
2. Product Features
[WiFi]
9Data Rate up to 54Mbps.
9Single-band 2.4-GHz 802.11b/g with Bluetooth v2.0 + EDR
9RF IC integrated on-chip PA capable of delivering 20dBm output power
9Low active transmit and receive power dissipation and ultra-low power in
stand-by and idle modes
9Supports IEEE802.11 b/g
Security:
9WPA and WPA2 for advanced authentication and encryption
9AES and TKIP in hardware for reduced power dissipation and encryption speed
9Worldwide regulatory support
9Patent pending technology maximizes multimedia streaming performance over
Bluetooth over WLAN in coexistence mode
9Patent pending Software Radio technology allows single radio, single baseband
integration of multiple standards
9Advanced network security features include WPA, WPA2, 802.11i and 802.11x
9Long and short preamble supported
[Bluetooth]
9Support AFH (Adaptive Frequency Hopping)
9Support Bluetooth v2.0 + EDR
9Backward compatible with Bluetooth v1.1 and v1.2
9Support for up to seven active Bluetooth devices
9Class 1 with 18dbm PA, 100m range
7/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
3. Install the Drivers and Utilities
1. Insert the Installation Software CD into CD-ROM drive. If the Auto-Run function
of CD-ROM is disabled, you can utilize the Windows Explorer to browse CD content
and run Setup.exe manually.
If the Auto-Run function of CD-ROM is enabled (in Windows, the default setting of
this function is usually enabled), then a CD menu will appear automatically.
1. The Instillation program before install 3DSP Wireless driver, the installation
program will install the requirement program “IVT BlueSoleil” and “Microsoft
WPA2 hot fix” (This is not necessary in many PCs if installed) . The program will
install IVT BlueSoleil first. Please press the “Yes” button start install BlueSoleil.
2. Select the Language you want to installation from the combo box, and then press
the “OK” button to continue.
8/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
3. Please click Next button several times to continue the software installation. In the
License Agreement window, please read license agreement carefully. Select “I
accept the terms in the license agreement” then click “Next” button to continue.
9/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
4. Select you want to place the program shortcut, and indicate the location of where
you want Bluetooth Software to be stored; if you do not change the default settings,
it will be stored under C:\Program Files\IVT Corporation\BlueSoleil
(Recommended). Click on “Next” button to continue. Or you can select your
prefers location to install. After finish, the installation program is ready for install.
10/44
太欣半導體股份有限公司
SYNTEK Semiconductor Co., Ltd.
BlueW-2310
User’s Manual
5. The Install Shield Wizard will begin to install the software and copy files to your
hard disk. After copy all the files, the installation will try to install virtual
Bluetooth device in your system. It may take a few minutes, please wait it finishes
the installation.
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
