System Q NiteDevil 24C Manuale utente

NiteDevil 24C Camera

SEE708

8MP Eyeball 2.8mm Built In Mic

Instruction Manual

NiteDevil.com

xSEE708

NiteDevil.com

Table of Contents

Part 1 Introduction 1

1 SEE708 ............................................................................................................................ 1

Part 2 Tools & Handy Extras 1

Part 3 Connections 2

Part 4 4-In-1 Technology 2

Part 5 OSD Menu 3

1 8MP OSD Menu ............................................................................................................... 4

2 Key Menu Settings .......................................................................................................... 5

Part 6 Audio Over COAX 6

Part 7 Troubleshooting 7

1 Camera Rebooting / Turning Off ..................................................................................... 7

2 Poor Quality Images ....................................................................................................... 7

3 Image isBlack & White .................................................................................................. 7

4 NCD / No Image Displayed on Recorder ......................................................................... 7

Part 8 General Maintenance 8

Part 9 Specification 9

1 SEE708 ............................................................................................................................ 9

Part 10 Conditions 10

1 General Company Disclaimer ....................................................................................... 10

2 WEEE Declaration ......................................................................................................... 10

3 Copyright ...................................................................................................................... 10

Index 11

Introduction

NiteDevil.com

Introduction

1.1 SEE708

The all new NiteDevil® 24C can stay in fullcolour around the clock using the minimalamount of

naturallight to produce superb fullcolour images. It really is a game changer inperformance and

should be used as a part of any CCTV systemrequiring fullcolour images in key areas around

entrances etc.

With built in dualIR and white light you can choose how the camera best works in your install.

Using white light to give visualwarning or using IR illumination to get a more discreet set up.

Tools & Handy Extras

Screwdriver

Drill

12V DC PSU

Drillbits

BNC Crimp Tool& BNCs

RG59 Coax Cable

DigitalMulti-Meter

LCD400K - CCTV Test monitor

31/03/2022

xSEE708

2NiteDevil.com

Connections

The camera has a 2.1mmsocket which requires 12V DC, use a regulated power supplyrated

above the current draw ofthe camera.

The camera is polarity sensitive so connections must be correctly made.

The camera has a standard BNC connector for video output, the output can be changed to

AHD, CVI or CVBS if required in the menu

4-In-1 Technology

Selectable HD-TVI, HD-CVI, AHD and CVBS (Analogue) Output. As default the camera is

set to HD-TVI, however the output can be changed to AHD, CVI or CVBS ifrequired.

This output can be changed with in the menu camera. Please note the "Mode” in the menu of the

DVR won’t change the format, as the menuoverrides the output.

See OSD Menu for accessing and changing the video format.

OSD Menu

NiteDevil.com

OSD Menu

Access to the camera menu is by Coaxitron. For the ZIP DVRs, ZIP Coaxitron is set as

default.

To access the Cameras Menu via coaxitron:-

1. Click on the image in Live view

2. Click on the PTZ button at the bottomofthe screen

3. Click on the IRIS + / centre button to display the menu

Use the directionalarrows to move up and

down through the menu.

Use the directionalarrows left and right to

change the option.

Use IRIS + to select & enter that menuoption.

31/03/2022

xSEE708

4NiteDevil.com

5.1 8MP OSD Menu

Video Mode

TVI / AHD / CVI / CVBS

Format

60Hz/ 50Hz/ NTSC / PAL

Language

English / Spanish / French/ Chinese

Exposure

Exposure Mode

Global

AGC

High / Middle / Low

Back

Exit

Save – Exit

Day & Night

Mode

Ext / Color/ B/W

Dim

0 – 3 (3 Default)

Back

Exit

Save – Exit

Video Settings

AWB

Auto

Brightness

1 -9 (5 Default)

Contrast

1 -9 (5 Default)

Sharpness

1 -9 (5 Default)

Saturation

1 -9 (5 Default)

Mirror

Default / Mirror / Flip / Rotate

Back

Exit

Save – Exit

Volume

0 – 9 (9 Default)

Reset

Exit

Save – Exit

OSD Menu

NiteDevil.com

5.2 Key Menu Settings

Exposure Mode - AUTO / GLOBE / GLOBAL sets the required shutter speed for the current

light level. The shutter speed willautomatically detect the required lengthoftime to keep the

digitalsensor exposed to light. FLK optionsets the shutter speed to stop synchronisation with

lighting so that pulsing effect is minimised.

White Balance - Colour adjustment of the camera to be set up so objects appear a natural

colour. ATW / PRO (Automatic trackingwhite balance) continually tracks and adjusts the white

balance, making it suitable for use in cameras in which the image content and lighting are subject

to changes.

Day & Night - The camera canbe set to colour or B&W mode or have it automaticallyswitch

Externalis set as default, the switch betweencolour and black & white is controlled by an

externaltrigger In this a light dependent resistor.

DNR (Noice Reduction) - Noise Reduction is the process ofremovingnoise fromthe video

signalby applying a digitalfilter. 2D noise reduction reduces noise in the foreground ofthe image

where as 3D noise reduction reduces noise in both the foreground and the background ofthe

image.

D-WDR - Digitally adjusts the exposure in areas ofthe frame to maintain optimum levels in both

the dark and bright areas ofan image.

NOTE - Some models may not have D-WDR function.

Reset - Defaults the camera to factory settings. This setting helps when fault finding issues with

the camera to ensure allsettings are defaulted.

31/03/2022

xSEE708

6NiteDevil.com

Audio Over COAX

As of writing this (March 2022), the Audio over COAX (CoaxialAudio) is compatible withthe ZIP

SUPA-S range ofrecorders.

*Note the standard SUPA recorders are not compatible with Audio over COAX.

To enable, in the menu on the SUPA-S go to System > General > Audio Input Type

Select Coaxial Audio

Select Apply

Troubleshooting

NiteDevil.com

Troubleshooting

7.1 Camera Rebooting / Turning Off

A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then

move the power supply closer to the camera.

B. For 12V DC cameras, only use regulated power supply rated above the current consumption,

so that the camera is always receiving the correct supplywhichis rated above the current

consumption.

C. Use thicker gauge copper cablingto reduce the voltage drop to the camera, using thicker

cable willreduce the resistance betweenthe camera and the power supply and therefore reduce

the voltage dropped along the cable.

7.2 Poor Quality Images

A. Check the video format the DVR (digitalvideo recorder), thenset the camera to the relevant

video format – see the 4-In-1 Technology

B. Ifset to CVBS, thenthis is a low quality video output for legacy systems (analogue - CVBS),

when usinga 2 MegaPixelDVR or above then use another video format, like HD-TVI.

C. Reset the camera menuvia Zip Coaxitron – OSD Menu

D. Check ifthe DVR (digitalvideo recorder) supports the resolutionofthe camera.

7.3 Image is Black & White

A. Check the video format your DVR supports, thenset the camera to the relevant video format

– see the 4-In-1 Technology

B. Reset the camera menuvia Zip Coaxitron OSD Menu

D. Check ifthe DVR (digitalvideo recorder) supports the resolutionofthe camera.

7.4 NCD / No Image Displayed on Recorder

A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then

move the power supply closer to the camera.

B. For 12V DC cameras, only use regulated power supply rated above the current consumption,

so that the camera is always receiving the correct supplywhichis rated above the current

consumption.

31/03/2022

xSEE708

8NiteDevil.com

C. Use thicker gauge copper cablingto reduce the voltage drop to the camera, using thicker

cable willreduce the resistance betweenthe camera and the power supply and therefore reduce

the voltage dropped along the cable.

D. Ensure that the BNC – BNC lead that is connected betweenthe camera and DVR has no

shorts between the ground and the centre core (positive) or open circuits along the centre core

(positive) or open circuits along the ground.

General Maintenance

Routinely clean the camera to prevent dust build up as this can effect the performance ofthe

camera. It is recommended to use a damp non-abrasive microfibre cloth.

Routinely check the connections for power and data to ensure no water ingress and corrosion.

Check that the cameras are firmly attached to the wallor mounting bracket.

Check playback in the recorder to ensure the camera is recording and triggering properly.

Altri manuali per NiteDevil 24C

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali System Q Telecamera di sicurezza

System Q

System Q IP-CAM705 Manuale utente

System Q

System Q SEE820 Manuale utente

System Q

System Q IP-CAM750 Manuale utente

System Q

System Q VisionPlus vari focal CCT555 Manuale utente

System Q

System Q Nite Devil 24 C SEE702 Manuale utente

System Q

System Q NiteDevil SEE705 Manuale utente

System Q

System Q PTZ900 Manuale utente

System Q

System Q ZIP IPCAI918 Manuale utente

System Q

System Q CAM526UW Manuale utente

System Q

System Q NiteDevil 24C IPCND705 Manuale utente

System Q

System Q Zip SEE852 Manuale utente

System Q

System Q PTZ800 Manuale utente

System Q

System Q PTZ280 Manuale utente

System Q

System Q NiteDevil 24C Manuale utente

System Q

System Q Kovert SEE906 Series Manuale utente

System Q

System Q CCT513 Manuale utente

System Q

System Q PCB820 Manuale utente

System Q

System Q SEE496 Manuale utente

System Q

System Q CCT455 Manuale utente

System Q

System Q Kovert SEE902 Series Manuale utente

System Q

System Q SEE850 Manuale utente

System Q

System Q CCT465 Manuale utente

System Q

System Q PTZM600 Manuale utente

System Q

System Q CAM300 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente