Tannoy DVS speaker Manuale utente
DVS Series
Stylish Surface Mount Loudspeakers
Operation Manual
2
DVS Series Operation Manual rev 2.0.0
3
DVS Series Operation Manual rev 2.0.0
Table of Contents
1. Introduction 4
2. Safety Instructions 4
3. Product Feature Identication 5
4. Standard Accessories 6
5. Installation Guidelines 7
6. DVS Dimensions 8
7. Technical Specications 11
8. Warranty 14
Table of Contents
1. Introduction
4
DVS Series Operation Manual rev 2.0.0
1. Introduction
Designed for a wide variety of sound reinforcement applications the Tannoy DVS is an ultra compact loudspeaker
system capable of delivering high sound pressure levels with extremely low distortion, resulting in outstanding
clarity, denition and detail. A truly universal solution, the DVS offers outstanding durability and resistance to scuffs
and knocks. Able to deliver consistent performance under a wide range of adverse conditions the DVS is suited
to applications indoors or out. Available in black or white the DVS will effectively blend into most backgrounds.
Utilisation of the point source loudspeaker allows the DVS to be mounted on a wall or ceiling in either horizontal
or vertical orientations without affecting its performance. A range of hardware options ensures simple and
effective installation. Only available with built-in line transformer. For applications requiring extended low frequency
enhancement, a range of Tannoy sub-bass systems are available and can be used in conjunction with the DVS.
2. Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. The user is responsible for xing the hardware to the surface to ensure safe operation. The xings must
support the weight of the product – please consult the manual’s specication page for the appropriate weights.
Please consult the relevant construction codes in your region for further information on suitable hardware
xing methods.
Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeakers.
3. Product Feature Identification
5
DVS Series Operation Manual rev 2.0.0
3. Product Feature Identification
INPUT CONNECTOR
Fit rubber grommet to ensure the
rear of the product is kept sealed
4. Standard Accessories
6
DVS Series Operation Manual rev 2.0.0
4. Standard Accessories
DINKLE SEAL
YOKE BRACKET
(SUPPLIED WITH
FIXINGS)
5. Installation Guidelines
7
DVS Series Operation Manual rev 2.0.0
5. Installation Guidelines
1. Fix the yoke bracket to the surface using a suitable xing method. (Fig.1)
2. Feed the speaker cable through the cable clamp cover then connect the
Euro-type plug to the wires, observing the correct polarity. (Fig.2)
3. For connection to the loudspeaker, use Pins 1 (+) and 2 (-).
Pins 3 (-) and 4 (+) are in parallel for connection to additional speakers
in a distributed line. (Fig.3)
4. Offer the speaker up to the bracket and attach using the thumb
screws provided (Fig.4)
5. Connect the Euro-type plug then replace the rubber grommet to
ensure the speaker is sealed. (Fig.5)
6. The DVS 4t models are tted with 30 W transformers. (Fig.6)
THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE.
NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE
IT IS SET FOR LOW IMPEDANCE.
7. The DVS 6t and DVS 8t models are tted with 60 W transformers. (Fig.7)
THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE.
NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE
IT IS SET FOR LOW IMPEDANCE.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
6. DVS Dimensions
8
DVS Series Operation Manual rev 2.0.0
6. DVS Dimensions
DVS 4
165.6
(6.52”) 153.6
(6.05”)
170.4
(6.71”)
51.0
(2.01”)
277.0
(10.91”)
246.4
(9.70”)
259.0
(10.20”)
4.6
(0.18”)
182.0
(7.17”)
143.0
(5.63”)
6. DVS Dimensions
9
DVS Series Operation Manual rev 2.0.0
6. DVS Dimensions
DVS 6
53.0
(2.09”)
216.5
(8.52”) 206.3
(8.12”)
212.2
(8.36”)
340.5
(13.41”)
304.5
(11.99”)
4.6
(0.18”)
246.0
(9.69”) 206.5
(8.13”)
31.0
(1.22”)
6. DVS Dimensions
10
DVS Series Operation Manual rev 2.0.0
6. DVS Dimensions
DVS 8
296.0
(11.65”) 265.1
(10.44”)
60.5
(2.38”)
290.0
(11.42”)
451.8
(17.79”) 415.7
(16.37”)
357.0
(14.06”)
4.6
(0.18”)
298.0
(11.73”)
26.7
(1.05”)
Indice
Altri manuali Tannoy Altoparlanti
Tannoy
Tannoy HTS Manuale utente
Tannoy
Tannoy ST50 Manuale utente
Tannoy
Tannoy PRECISION PC/IP Manuale utente
Tannoy
Tannoy QFLEX 64 Manuale utente
Tannoy
Tannoy VX 15Q Manuale utente
Tannoy
Tannoy CVS6 Manuale utente
Tannoy
Tannoy i8 AW Manuale utente
Tannoy
Tannoy VXP 6 Manuale di installazione e funzionamento
Tannoy
Tannoy POWER V12 Manuale utente
Tannoy
Tannoy TKT Series Manuale utente
Tannoy
Tannoy V300 Manuale utente
Tannoy
Tannoy i8 AW Manuale utente
Tannoy
Tannoy QFLEX 16LS-WP Manuale utente
Tannoy
Tannoy DVS Series Manuale utente
Tannoy
Tannoy CMS 1201DCT Manuale utente
Tannoy
Tannoy VLS SERIES Manuale utente
Tannoy
Tannoy PRESTIGE GR KENSINGTON GR-OW Manuale utente
Tannoy
Tannoy REVEAL TS12 s Manuale utente
Tannoy
Tannoy ARENA Highline TS300 Manuale utente
Tannoy
Tannoy ellipse Manuale utente
